Quote:
|
Originally Posted by BenR a low pressure high volume pump to the swirl pot, then the normal high pressure pump to the rail, and a return to pot and tank.
all you need |
thats the question, which low pressure high volume pump, i cant seem to find any
regarding High pressure pumps other than the sytec one i listed above the Aeromotive one im looking at is good for 700hp
and flows fuel at max over 450lbs an hour at 45psi
and thats not there highest output pump
the aeromotive systems that you can purchase complete dont facilitate the use of a swirl pot, id like to have one due to the fact i will only be using a small 20 litre max fuel cell,
in reality i suppose if i have an idea of fuel flow requirements at what psi then i can go hunt for the correct parts, thats why u guys are the engine builders
...as im hoping you will have ball park figures that i can use