| rob the shot blasting has to happen before the cage goes in, as the cage in at the mo will be moved to another car in York...and at the same time i can rough plate any un-needed openeing before the cage is welded in.....this also gives the cage fabricator clean toyota metal to work with .
then it can be brought down to you once im happy that the stuff required to be done is done.......i mean i have no issues with re-collecting the car after the cage is fitted to get more done my end before returning it to you or Ben to get the next stage done.......
the std 3s-ge.................................. bore and stroke is 86 x 86mm @1998cc
with 2,2 low compression.................. bore and stroke is 87 x 93mm @ 2211cc (compression 8:8:1) with std thickness headgasket, normal uptrated ones are .5 thick |