Drifting forum - Driftworks - View Single Post - Is Norway the new home of the drift cars?

NikDev · 08-12-2007, 10:10

Just had too copy paste spec list into here

Its jusst so massive

ENGINE:

• 86mm HKS Forged Piston (2.1litre)
• HKS Metal Head Gasket
• HKS Step 3 Camshafts (In : 272, Ex : 272)
• HKS Lash Killer
• HKS Cam Pulleys
• Nismo Metal (Bearings)
• HKS 2835 Turbo (Actuator Type)
• Auto Produce BOSS Exhaust Manifold
• Auto Produce BOSS Turbo Outlet
• Auto Produce BOSS 80mm Titanium Downpipe and Exhaust System
• SARD 850cc Injectors
• Uprated Bosche Fuel Pump
• Collector Tank
• Uprated Fuel Lines and Connectors
• HKS FconV Pro Gold Ver 3.2
• Earls Oil Cooler and Filter Relocation Block
• HKS Intercooler Kit
• Venom NOS Kit
• Tomei Crank Bolt
• Tomei Head Bolts
• Yashio Factory Radiator
• Garage Defend Carbon Cooling Panel
• Dual Electric Fans
• Power Induction Kit
• Metal Suction Pipe
• Colour Coded Cam Cover
• Coolant Swirl Pot
• Silk Road Engine Torque Damper
• Aftermarket Engine and Mission Mounts
• SFS Radiator Hoses
• Mission Oil Reserve Tank
• Yashio Ignition Coils

SUSPENSION / BRAKES / WHEELS / DRIVE

• Nismo 6 Speed Cross Mission (Overhauled 2 Events ago)
• Nismo Coppermix Clutch
• Nismo GT Pro LSD
• R33 Rear Member with Additional Welding
• R33 Drive Shafts
• Willwood 6 Pot Front Brake Kit
• Willwood Brake Balancer
• R33 GTR Rear Brembos
• Aftermarket Pads
• DG5 Coilovers (Front 9KG, Rear 7KG) with Camber Adjustable Top Mounts
• Prodrive SPL Gold Alloys (Front 9.5J + 15 x 17", Rear 9.5J + 15 x 18")
• Tyres: Bridgestone Potenza RE01R (Front 245 40 17, Rear 265 35 18)
• Aftermarket Lightweight Wheel Nuts
• Kei Office Rear Lower Arms
• Kei Office Rear Upper Arms
• Kei Office Rear Suspension Rods
• Stainless Mesh Brake Lines
• Kei Office Front Tension Rods
• Kei Office Front Lower Arms
• Kazama Auto Tie Rods and Ends

BODY / EXTERIOR

• Fully Spot Welded throughout
• Kei Office Front Aero
• Kei Office Side Steps
• Kei Office Rear Bumper
• SARD Carbon Spoiler
• Droop Acrylic Glass
• Speed Glass Front Screen (-4kg on Std)
• Do-Luck Front FRP Fenders (+ 25mm)
• Do-Luck Rear Fenders (+ 30mm)
• Auto Produce BOSS Carbon Drivers Door
• FRP Passenger Door
• M-Sports Carbon Bonnet
• Cusco 7 Point Cage Welded in + additional 6 Point Bars to Strut Tops and Side Bars
• Kei Office D1 Body Graphics
• Front and Rear Tow Eyes
• Front Lower Canards (Carbon)
• Front Upper Canards (Carbon)
• Headlight Eyebrow Spoilers
• Air Intake Duct
• Aftermarket Rear Lenses

INTERIOR

• Heat Proofing and Chequer Plate foot rests on Floor wells
• Nismo 280kmh Clocks
• Prodrive Sparco Suede offset Steering Wheel
• Adjustable Steering Boss
• Yashio Factory Okachan Digital Water Temp
• HKS EVC Boost Controller
• Apexi Oil Pressure Gauge (With Peak Hold / Warning)
• Apexi Temp Gauge (With Peak Hold / Warning)
• Apexi EGT Gauge (With Peak Hold / Warning)
• Bride Recliner Passenger Seat
• Bride Full Bucket Drivers Seat
• Strobe Lights
• Fully Repainted Kei Office Green (Interior, Engine Room and Boot Silver)

08-12-2007, 10:10	#18 (permalink)
NikDev Drifts a Swede Join Date: Oct 2006 Location: Norway Posts: 390	Just had too copy paste spec list into here Its jusst so massive ENGINE: • 86mm HKS Forged Piston (2.1litre) • HKS Metal Head Gasket • HKS Step 3 Camshafts (In : 272, Ex : 272) • HKS Lash Killer • HKS Cam Pulleys • Nismo Metal (Bearings) • HKS 2835 Turbo (Actuator Type) • Auto Produce BOSS Exhaust Manifold • Auto Produce BOSS Turbo Outlet • Auto Produce BOSS 80mm Titanium Downpipe and Exhaust System • SARD 850cc Injectors • Uprated Bosche Fuel Pump • Collector Tank • Uprated Fuel Lines and Connectors • HKS FconV Pro Gold Ver 3.2 • Earls Oil Cooler and Filter Relocation Block • HKS Intercooler Kit • Venom NOS Kit • Tomei Crank Bolt • Tomei Head Bolts • Yashio Factory Radiator • Garage Defend Carbon Cooling Panel • Dual Electric Fans • Power Induction Kit • Metal Suction Pipe • Colour Coded Cam Cover • Coolant Swirl Pot • Silk Road Engine Torque Damper • Aftermarket Engine and Mission Mounts • SFS Radiator Hoses • Mission Oil Reserve Tank • Yashio Ignition Coils SUSPENSION / BRAKES / WHEELS / DRIVE • Nismo 6 Speed Cross Mission (Overhauled 2 Events ago) • Nismo Coppermix Clutch • Nismo GT Pro LSD • R33 Rear Member with Additional Welding • R33 Drive Shafts • Willwood 6 Pot Front Brake Kit • Willwood Brake Balancer • R33 GTR Rear Brembos • Aftermarket Pads • DG5 Coilovers (Front 9KG, Rear 7KG) with Camber Adjustable Top Mounts • Prodrive SPL Gold Alloys (Front 9.5J + 15 x 17", Rear 9.5J + 15 x 18") • Tyres: Bridgestone Potenza RE01R (Front 245 40 17, Rear 265 35 18) • Aftermarket Lightweight Wheel Nuts • Kei Office Rear Lower Arms • Kei Office Rear Upper Arms • Kei Office Rear Suspension Rods • Stainless Mesh Brake Lines • Kei Office Front Tension Rods • Kei Office Front Lower Arms • Kazama Auto Tie Rods and Ends BODY / EXTERIOR • Fully Spot Welded throughout • Kei Office Front Aero • Kei Office Side Steps • Kei Office Rear Bumper • SARD Carbon Spoiler • Droop Acrylic Glass • Speed Glass Front Screen (-4kg on Std) • Do-Luck Front FRP Fenders (+ 25mm) • Do-Luck Rear Fenders (+ 30mm) • Auto Produce BOSS Carbon Drivers Door • FRP Passenger Door • M-Sports Carbon Bonnet • Cusco 7 Point Cage Welded in + additional 6 Point Bars to Strut Tops and Side Bars • Kei Office D1 Body Graphics • Front and Rear Tow Eyes • Front Lower Canards (Carbon) • Front Upper Canards (Carbon) • Headlight Eyebrow Spoilers • Air Intake Duct • Aftermarket Rear Lenses INTERIOR • Heat Proofing and Chequer Plate foot rests on Floor wells • Nismo 280kmh Clocks • Prodrive Sparco Suede offset Steering Wheel • Adjustable Steering Boss • Yashio Factory Okachan Digital Water Temp • HKS EVC Boost Controller • Apexi Oil Pressure Gauge (With Peak Hold / Warning) • Apexi Temp Gauge (With Peak Hold / Warning) • Apexi EGT Gauge (With Peak Hold / Warning) • Bride Recliner Passenger Seat • Bride Full Bucket Drivers Seat • Strobe Lights • Fully Repainted Kei Office Green (Interior, Engine Room and Boot Silver)