Drifting forum - Driftworks - View Single Post

Matt_S · 19-02-2008, 10:37

OK Baba, Ive researched this for you on our D:MON site, as we all had the same to do and all had similar shopping lists this time last year. Steve Bought 4M from DW I think , but I bought the Longacre stuff from Tweaks, as I said earlier in the thread...

Process Protector Roll Bar Padding | Roll Bar Padding | Demon Tweeks Motorsport, Motorcycle, Modifying, Parts and Accessories
The ultimate in roll bar padding, having a 15/8"ID offset hole and 1" thick high density padding giving you the best protection possible. Flame retardant. Length: 36"/914mm."
THe rules from EDC were "Parts of roll cage within 150mm of occupant’s helmets must be fitted with fire resistant padding."

And from what Ive read on the EDC forum, the rules arent changing from last year.

FWIW, ALL FIA padding is stamped, so dont get ripped off

Safe Drives - FIA Homologated Roll Cage Padding, Roll Bar Padding
FIA Homologated Roll Cage Padding

FIA 8857-2001 Type A Homologated Roll Cage Padding.

FIA padding is stamped with certification. Roll bar padding is not just roll bar padding. Tests have proven that roll bar padding plays a vital role in decreasing the potential of serious injury in crashes.

The BSCI padding set the industry standards for quality and proven additional safety.

The materials used to manufacture the BSCI padding were formulated to absorb impact, which in turn reduces impact energy received by the driver.

BSCI's padding is made from a modified open-cell polyurethane foam.

Cut the padding to shape it on turns and bends in the roll bar.

• Available in colors Black, Red and Blue
• Molded in acrylic adhesive for easy installation
• Will not melt or drip in a fire
• Bends to fit 7” (175 mm) radius
• Easy to cut and shape for custom installation
• Comes in 3ft long sections.
FIA padding is stamped with certification.

Meets the 201.U and 302 standard of the Federal Motor Vehicle Safety Standards.

1 3/4" - 2” (44-50 mm) Bar Diameter
30 mm Thick
36” (915 mm) Length

1 1/4”- 1 5/8” (32-42 mm) Bar Diameter
30 mm Thick
36” (915 mm) Length

Made in the USA.

I hope that helps a bit.

19-02-2008, 10:37	#88 (permalink)
Matt_S SELLIN' UP!!! Join Date: Jul 2004 Location: NE Essex Posts: 4,255	OK Baba, Ive researched this for you on our D:MON site, as we all had the same to do and all had similar shopping lists this time last year. Steve Bought 4M from DW I think , but I bought the Longacre stuff from Tweaks, as I said earlier in the thread... Process Protector Roll Bar Padding \| Roll Bar Padding \| Demon Tweeks Motorsport, Motorcycle, Modifying, Parts and Accessories The ultimate in roll bar padding, having a 15/8"ID offset hole and 1" thick high density padding giving you the best protection possible. Flame retardant. Length: 36"/914mm." THe rules from EDC were "Parts of roll cage within 150mm of occupant’s helmets must be fitted with fire resistant padding." And from what Ive read on the EDC forum, the rules arent changing from last year. FWIW, ALL FIA padding is stamped, so dont get ripped off Safe Drives - FIA Homologated Roll Cage Padding, Roll Bar Padding FIA Homologated Roll Cage Padding FIA 8857-2001 Type A Homologated Roll Cage Padding. FIA padding is stamped with certification. Roll bar padding is not just roll bar padding. Tests have proven that roll bar padding plays a vital role in decreasing the potential of serious injury in crashes. The BSCI padding set the industry standards for quality and proven additional safety. The materials used to manufacture the BSCI padding were formulated to absorb impact, which in turn reduces impact energy received by the driver. BSCI's padding is made from a modified open-cell polyurethane foam. Cut the padding to shape it on turns and bends in the roll bar. • Available in colors Black, Red and Blue • Molded in acrylic adhesive for easy installation • Will not melt or drip in a fire • Bends to fit 7” (175 mm) radius • Easy to cut and shape for custom installation • Comes in 3ft long sections. FIA padding is stamped with certification. Meets the 201.U and 302 standard of the Federal Motor Vehicle Safety Standards. 1 3/4" - 2” (44-50 mm) Bar Diameter 30 mm Thick 36” (915 mm) Length 1 1/4”- 1 5/8” (32-42 mm) Bar Diameter 30 mm Thick 36” (915 mm) Length Made in the USA. I hope that helps a bit.