Yeh, thats the problem I've currently got along with the fact that the springs are too long. You can see that the lower spring platforms are right at the bottom and that there's about an inch and a half of travel left in the shock, so if I can lose about 3/4rs of an inch off that travel and leave some in there with a shorter spring where the lower platforms are sat half way up the adjustment then I'll be running lower. Combine that with some machine work to the top spring seat and some new slimline topmounts and I should be able to drop it a good 30mm further again. It wont be uber low by MJG/Dex standards but to be honest, I don't want it uber low as I think that is gay!
