Quote:
Originally Posted by sammysideways  m3 turbo, what parts you got?? im intrested. prob is id need to adjust the compression and im poo at taking engines apart. |
Hi sammy
I have,
Exhaust manifold
dump valve
rising rate fuel regulater
3.2 evo injectors
a/c fan extra cooling
turbosmart boost controller
pipe work from intercooler to turbo
I can get my pipe work coppied from inlet manifold to intercooler
You would need to get a turbo td4 or similar and a intercooler. you could leave the standard compression and run it around 8/9 psi or put a thicker head gasket on(i might have one) and drop it to around 10.2.1.
If you drop it i reckon you could run 14 psi and would give you well over 400bhp!!!
I have run this setup on a 3.0 m3 engine with 10.2.1 compression and at 15 psi it give us 480bhp.
If you wana have a go i will give you a hand.