BDC/EDC reg roll cage padding??! - Page 2 - Drifting forum

Matt_S · 12-02-2008, 14:20

Quote:

oops my bad with vat and delivery it goes to just over a tenner

Err, thats what I said

FlikstRR · 12-02-2008, 15:20

will wait for bdc confirmation before i buy just in case

Chris_200SX · 12-02-2008, 15:24

Quote:

Originally Posted by Matt_S

Err, thats what I said

ahhh but i didnt know where you got it from

Matt_S · 12-02-2008, 15:28

Im 99.999999999% sure its that longacre stuff from Tweaks that I bought.

Chris_200SX · 12-02-2008, 15:34

Quote:

Originally Posted by Matt_S

My cage padding cost me over £10 a length and I had to buy 6 lengths .

thats all you said pal, no mention of demon tweeks

Kev · 13-02-2008, 01:19

ROLLCAGE PADDING STOCK CAR - AUTOGRASS - STOCK ROD on eBay, also Engine Tuning Parts, Performance Tuning Parts, Car Tuning Styling, Cars, Parts Vehicles (end time 16-Feb-08 22:24:18 GMT)

could be good.
only thing is, i dont see "fireproof"

Chris_200SX · 13-02-2008, 08:19

hmmm it does look like the stuff demom tweeks are selling.

ill try and find out later

Jord · 13-02-2008, 08:19

Quote:

Originally Posted by Kev

ROLLCAGE PADDING STOCK CAR - AUTOGRASS - STOCK ROD on eBay, also Engine Tuning Parts, Performance Tuning Parts, Car Tuning Styling, Cars, Parts Vehicles (end time 16-Feb-08 22:24:18 GMT)

could be good.
only thing is, i dont see "fireproof"

Thats the exact stuff I have.

Chris_200SX · 13-02-2008, 08:22

Quote:

Originally Posted by Jord

Thats the exact stuff I have.

hate to dissapoint you Jord, but i just rang the guy selling the padding and he says it isnt fire retardent

JulesS14200 · 13-02-2008, 08:27

Quote:

Originally Posted by Chris_200SX

ill be interested in getting some of this. My views were the same as phil.

EDIT : would this be suitable?

Professional Motorsport Parts, Spares & Rally Equipment from Rally Design

I got my padding from there, its offset as well

Jord · 13-02-2008, 08:52

Quote:

Originally Posted by Chris_200SX

hate to dissapoint you Jord, but i just rang the guy selling the padding and he says it isnt fire retardent

Im not disappointed mate, I got it for free

I guess it'd still pass scrutineering though as there are no visual differences between the fire retardant and non. And no labels to indicate either?

Unless the scrut is walking round with a pack of swan vestas

Chris_200SX · 13-02-2008, 09:01

Quote:

Originally Posted by Jord

And no labels to indicate either?

Unless the scrut is walking round with a pack of swan vestas

ha ha lol, im sure BDC can clarify this when they get 5 mins.

FlikstRR · 13-02-2008, 15:53

soon as i get a word on all the links above from BDC .. im buying some.

Matt_S · 13-02-2008, 22:44

I can verify that the stuff I have is pretty good at putting lit cigarettes out

Mattyboi · 13-02-2008, 22:49

Quote:

Originally Posted by Jord

Im not disappointed mate, I got it for free

I guess it'd still pass scrutineering though as there are no visual differences between the fire retardant and non. And no labels to indicate either?

Unless the scrut is walking round with a pack of swan vestas

Or reads this post! Which they defo will! lol!

FlikstRR · 18-02-2008, 00:02

still no word from scrutineer?

Polo · 18-02-2008, 14:18

FIA stuff here

AA/113-50 OMP ROLL CAGE BLACK FOAM RUBBER TUBING 50mm on eBay, also, Subaru, Car Parts, Cars, Parts Vehicles (end time 18-Feb-08 22:15:32 GMT)

Best stuff iv seen is the safteydevices padding but cant seem to find it anywhere, maybe discont when production moved to poland

FlikstRR · 18-02-2008, 15:16

that 50mm width suit the fabricage? I assume ill need 2 set of the stuff..

2m wont do drivers door bar, front arms and the cross above windscreen..

Jord · 18-02-2008, 15:20

The door bars ont he Fabricage, errrr, cage are 1m each alone. Add another meter and a bit for each A-pillar and another meter or two for the roof bars.

superclarkey · 18-02-2008, 15:25

The padding must be fire resistant, also bear inmind its not to just protect you while you have your helmet on, with your helmet off you are more like to die from a 10mile hour crash then at a 60mph without one

Also bear in mind if you crash or car rolls your arms fly about, and trust me when i say this, even with proper padding it still really frickING HURTS!

as I'm one of the scrutiner at the BDC if i see anything that looks like it should be on my water pipes at home.. thats were you'll be going .. home

Clarkey.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-02-2008, 15:20	#22 (permalink)
FlikstRR dorifto kingu! Join Date: Aug 2006 Location: Reading, UK Posts: 1,900	will wait for bdc confirmation before i buy just in case

12-02-2008, 15:28	#24 (permalink)
Matt_S SELLIN' UP!!! Join Date: Jul 2004 Location: NE Essex Posts: 4,248	Im 99.999999999% sure its that longacre stuff from Tweaks that I bought.

13-02-2008, 01:19	#26 (permalink)
Kev touge runner Join Date: Jun 2005 Location: Bonnie Scotland Posts: 234	ROLLCAGE PADDING STOCK CAR - AUTOGRASS - STOCK ROD on eBay, also Engine Tuning Parts, Performance Tuning Parts, Car Tuning Styling, Cars, Parts Vehicles (end time 16-Feb-08 22:24:18 GMT) could be good. only thing is, i dont see "fireproof"

13-02-2008, 08:19	#27 (permalink)
Chris_200SX -NightWalkers- Join Date: Aug 2005 Location: S.Wales Posts: 825	hmmm it does look like the stuff demom tweeks are selling. ill try and find out later

13-02-2008, 15:53	#33 (permalink)
FlikstRR dorifto kingu! Join Date: Aug 2006 Location: Reading, UK Posts: 1,900	soon as i get a word on all the links above from BDC .. im buying some.

13-02-2008, 22:44	#34 (permalink)
Matt_S SELLIN' UP!!! Join Date: Jul 2004 Location: NE Essex Posts: 4,248	I can verify that the stuff I have is pretty good at putting lit cigarettes out

18-02-2008, 00:02	#36 (permalink)
FlikstRR dorifto kingu! Join Date: Aug 2006 Location: Reading, UK Posts: 1,900	still no word from scrutineer?

18-02-2008, 14:18	#37 (permalink)
Polo Team Green! Join Date: Aug 2006 Location: Aylesbury Posts: 1,808	FIA stuff here AA/113-50 OMP ROLL CAGE BLACK FOAM RUBBER TUBING 50mm on eBay, also, Subaru, Car Parts, Cars, Parts Vehicles (end time 18-Feb-08 22:15:32 GMT) Best stuff iv seen is the safteydevices padding but cant seem to find it anywhere, maybe discont when production moved to poland

18-02-2008, 15:16	#38 (permalink)
FlikstRR dorifto kingu! Join Date: Aug 2006 Location: Reading, UK Posts: 1,900	that 50mm width suit the fabricage? I assume ill need 2 set of the stuff.. 2m wont do drivers door bar, front arms and the cross above windscreen..

18-02-2008, 15:20	#39 (permalink)
Jord PS13 Silvia Join Date: Sep 2004 Location: Peterborough Posts: 6,819	The door bars ont he Fabricage, errrr, cage are 1m each alone. Add another meter and a bit for each A-pillar and another meter or two for the roof bars.

18-02-2008, 15:25	#40 (permalink)
superclarkey Mood=Amazing Join Date: Aug 2004 Location: West Midlands Posts: 8,010	The padding must be fire resistant, also bear inmind its not to just protect you while you have your helmet on, with your helmet off you are more like to die from a 10mile hour crash then at a 60mph without one Also bear in mind if you crash or car rolls your arms fly about, and trust me when i say this, even with proper padding it still really frickING HURTS! as I'm one of the scrutiner at the BDC if i see anything that looks like it should be on my water pipes at home.. thats were you'll be going .. home Clarkey.