Fabricage and the BDC - Drifting forum

BDC · 30-06-2008, 11:48

Ladies and gents

The BDC is proud to announce that that we have once again secured a deal for BDC licence holders, this is in association with Fabricage - Rollcage Design and manufacture.

The details;

Fabricage is supplying a FULL ROLLCAGE FREE OF CHARGE to the winner of the 2008 Amateur class. *Restrictions apply*

Fabricage are also offering a 15% discount on any full 6 point bolt in rollcages which meet the specifications of the BDC/EDC regulations.

Rollcages will 6 point fastenings, complete with rear diagonal, a single door bar on each side, all fastening required and powered coated in black.

As shown in Louise Ridleys R33 GTST

Please contact Peter on 01223 870563

This offer is open to any driver holding a BDC licence, this offer is for one full rollcage per driver - per year. This does not include half cages. A full list of drivers and licence numbers will be held by Fabricage to ensure this offer is not abused, any driver abusing these terms and conditions will receive a ban from competing within the BDC for a period the BDC team see fit. Fabricage may ask to see a copy of a credit card type licence and may refuse the above offer to any driver not able to produce this when requested.

*A free rollcage will be supplied to the winner of the 2008 Amateur class providing Fabricage has a rollcage for that model car, if not then a rollcage will be provided minus the price of a standard rollcage*

Many thanks

The BDC team.

**Mitch** · 30-06-2008, 11:53

I've had 3 cages off Peter but obviously not got the boobage to get a free one like some

. I'll still go back there if I need another though as the quality and price are tops

Nice one again Team BDC. Can you sort out a similar deal from somewhere for tyres?

Crosshatch · 30-06-2008, 11:55

Good work BDC

+1 for mitches idea... discounted tyres please

baggsy340 · 30-06-2008, 12:36

i am getting one !!!

Maximus Driftus · 30-06-2008, 13:50

he's going to be a busy bee........ top stuff guys!

**James** · 30-06-2008, 13:54

good work sirs

mr2 · 30-06-2008, 14:54

Will be needing a price for a full edc spec weld in

RandomGuy · 30-06-2008, 17:31

awesome work

got a fabricage in mine and can say it rocks!!!

DriftLexus · 10-07-2008, 20:12

the cage in mine was done by Peter at fabricage

sx-si · 11-07-2008, 18:15

mine was done by them aswell and i highly recomend them

FlikstRR · 11-07-2008, 20:07

same as si.. from the same group buy in fact

Chris_200SX · 11-07-2008, 21:40

Quote:

Originally Posted by FlikstRR

same as si.. from the same group buy in fact

and me

Sweeps · 14-07-2008, 23:48

After seeing some of Fabricages weld in versions i'm looking at sending my AE86 down for a full weld in version

AE86 Saftey devices cage anyone? (Comes with RAC/MSA cert) Available soon

chunk · 14-07-2008, 23:58

Fabricage FTW, Peter did mine in the taxi last year. Well impressed with the tightness/fit of the cage

narcotic · 15-07-2008, 07:55

Quote:

Originally Posted by chunk

Fabricage FTW, Peter did mine in the taxi last year. Well impressed with the tightness/fit of the cage

cant use the rear seats though can you

chunk · 15-07-2008, 09:22

If you got a bolt in harness bar and diagonal i'd say you can, although, the seat would require some choppage.

narcotic · 15-07-2008, 09:47

Quote:

Originally Posted by chunk

If you got a bolt in harness bar and diagonal i'd say you can, although, the seat would require some choppage.

screw that, custom cage ftw my car is a street car and needs comfy bits in it too

30-06-2008, 11:48	#1 (permalink)
BDC AS SEEN ON TV! Join Date: Nov 2007 Posts: 306	Fabricage and the BDC Ladies and gents The BDC is proud to announce that that we have once again secured a deal for BDC licence holders, this is in association with Fabricage - Rollcage Design and manufacture. The details; *Fabricage is supplying a FULL ROLLCAGE FREE OF CHARGE to the winner of the 2008 Amateur class.* Restrictions apply Fabricage are also offering a 15% discount on any full 6 point bolt in rollcages which meet the specifications of the BDC/EDC regulations. Rollcages will 6 point fastenings, complete with rear diagonal, a single door bar on each side, all fastening required and powered coated in black. As shown in Louise Ridleys R33 GTST Please contact Peter on 01223 870563 This offer is open to any driver holding a BDC licence, this offer is for one full rollcage per driver - per year. This does not include half cages. A full list of drivers and licence numbers will be held by Fabricage to ensure this offer is not abused, any driver abusing these terms and conditions will receive a ban from competing within the BDC for a period the BDC team see fit. Fabricage may ask to see a copy of a credit card type licence and may refuse the above offer to any driver not able to produce this when requested. A free rollcage will be supplied to the winner of the 2008 Amateur class providing Fabricage has a rollcage for that model car, if not then a rollcage will be provided minus the price of a standard rollcage Many thanks The BDC team.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

30-06-2008, 11:53	#2 (permalink)
Mitch Driftgarage Join Date: Jul 2004 Location: Derby fulltime Posts: 10,428	I've had 3 cages off Peter but obviously not got the boobage to get a free one like some . I'll still go back there if I need another though as the quality and price are tops Nice one again Team BDC. Can you sort out a similar deal from somewhere for tyres?

30-06-2008, 11:55	#3 (permalink)
Crosshatch -NightWalkers- Join Date: Mar 2007 Location: Cardiff Posts: 1,340	Good work BDC +1 for mitches idea... discounted tyres please

30-06-2008, 12:36	#4 (permalink)
baggsy340 dorifto kingu! Join Date: Mar 2007 Location: s1 world essex Posts: 712	i am getting one !!!

30-06-2008, 13:50	#5 (permalink)
Maximus Driftus dorifto kingu! Join Date: Jun 2007 Location: sunny Texas! Posts: 669	he's going to be a busy bee........ top stuff guys!

30-06-2008, 13:54	#6 (permalink)
James Lights out! Join Date: Jul 2004 Location: Birmingham UK Posts: 7,619	good work sirs

30-06-2008, 14:54	#7 (permalink)
mr2 dorifto kingu! Join Date: Feb 2007 Location: Rainham,Essex Posts: 588	Will be needing a price for a full edc spec weld in

30-06-2008, 17:31	#8 (permalink)
RandomGuy Team Japspeed Join Date: Aug 2005 Location: Manchester Posts: 6,771	awesome work got a fabricage in mine and can say it rocks!!!

10-07-2008, 20:12	#9 (permalink)
DriftLexus BDC Join Date: Feb 2005 Location: Germany....Now! Posts: 3,339	the cage in mine was done by Peter at fabricage

11-07-2008, 18:15	#10 (permalink)
sx-si dorifto kingu! Join Date: Jan 2007 Location: www.driftracing.co.uk www.dfdrift.co.uk Posts: 884	mine was done by them aswell and i highly recomend them

11-07-2008, 20:07	#11 (permalink)
FlikstRR dorifto kingu! Join Date: Aug 2006 Location: Reading, UK Posts: 2,120	same as si.. from the same group buy in fact

14-07-2008, 23:48	#13 (permalink)
Sweeps dorifto kingu! Join Date: Jun 2005 Location: Boston Posts: 1,098	After seeing some of Fabricages weld in versions i'm looking at sending my AE86 down for a full weld in version AE86 Saftey devices cage anyone? (Comes with RAC/MSA cert) Available soon

14-07-2008, 23:58	#14 (permalink)
chunk MTM Join Date: Jun 2005 Location: Leicester Posts: 3,878	Fabricage FTW, Peter did mine in the taxi last year. Well impressed with the tightness/fit of the cage

15-07-2008, 09:22	#16 (permalink)
chunk MTM Join Date: Jun 2005 Location: Leicester Posts: 3,878	If you got a bolt in harness bar and diagonal i'd say you can, although, the seat would require some choppage.