-- --- SIL80 to 180 MaNiA all mash and a floppy sausage -----

**Mattolodis** · 14-02-2012 17:25

Originally Posted by HuDeani_R32

Hmm either a big wing or a Rear diffuser? I wanna put a diffuser on mine but gotta get the bits I actually have on first haha

I already have the 326 power spoiler ..... But your def on to something

**HuDeani_R32** · 15-02-2012 07:54

Sweet!! Lol I wonder if its one of the ones I was looking at getting!!

**Mattolodis** · 15-02-2012 19:26

Well had the afternoon off today so got on with fitting up the front bumper, giving it a wash and general tidy up and check over.

Also got my JECS 850cc injectors through, they were a really good price even with a bit of import duty

Took the car for a test drive and got beached on a lump in my drive and also noticed its really rubbing the front arches still

. So tommorrow im going to lift the coilovers to just ease the pressure on smashing the wings and for it to clear cats eyes, although i want the car to be uber decked i really want to make use of all the lock mods iv done without smashing the wings to bits so needs must, it wont be going up much id say cm and half to clear bits.

Anyway heres how it stands now jusat without the wing im happy with it

**HuDeani_R32** · 15-02-2012 20:39

Looking rather tasty!

**steveboiboi** · 15-02-2012 20:56

looking good matey!

**carlrst** · 15-02-2012 21:53

fuck it looks good!
is there any rule as to how much the lower arms should be extended?

**Mattolodis** · 16-02-2012 19:48

Originally Posted by carlrst

fuck it looks good!
is there any rule as to how much the lower arms should be extended?

Cheers man, I would say trial and error on the lower arms i wanted there to be lots of neg camber for me to be able to mess about with and there is maybe bit to much lol.

I have hav 35mm put on to s14 arms ( which are wider anyway ) i would say 30mm on s14 arms would be perfect.

**Mattolodis** · 21-02-2012 19:48

Took the car out for it first outing in a while down to Lydden Hill saturday, got there and back pretty much faultlessly. Only thing was tiny oil leak and realised the tracking really needs to be done

Was good day out got to see some friendly faces and meet a couple more.

got a couple of pics courtesy of Nick Cheng and J-bo

Next important date is 28th when the car is getting full re-map fingers crossed everything goes ok and i see a nice usable figure, following that will be the Silverstone BDC licence day on the 3rd .............. cant fookin wait

**Struggle** · 21-02-2012 19:57

the camber on this must be horrendous!!! i extended my s14 arms (on an s14) by 20mm which gave me 6 degrees. which is far to much as it is let alone this.

looks mediocre but can't be good.

**Mattolodis** · 21-02-2012 20:18

Originally Posted by Struggle

the camber on this must be horrendous!!! i extended my s14 arms (on an s14) by 20mm which gave me 6 degrees. which is far to much as it is let alone this.

looks mediocre but can't be good.

Cheers man, its different on a 180/s13 shell doesent increase as much, i wont be running as harsh camber as it is at the moment its just how it is before i get the tracking all done ... looks pretty badass too lol

**Mattolodis** · 23-02-2012 20:05

New part for the rear end turned up today, think its gonna look good and suit the car well. Gotta get on the car at the weekend to get final bits done in preperation for the mapping session at rising sun Tuesday, cannni wait !!!

**dingdong** · 23-02-2012 22:47

ohhhhhhhhhhhh big week then off to silverstone

**HuDeani_R32** · 23-02-2012 23:40

Oh man I wanna see if the rear is what I think it is lol bet its the same thing im thinking of getting for mine

cone on spill!!

**Mattolodis** · 24-02-2012 18:14

Originally Posted by dingdong

ohhhhhhhhhhhh big week then off to silverstone

Yeah man really cant wait now my nervousness has turned into excitement..... sure it will reverse on the day though lol

Originally Posted by HuDeani_R32

Oh man I wanna see if the rear is what I think it is lol bet its the same thing im thinking of getting for mine

cone on spill!!

I have ideas how to fit and shall get on it sunday if i get time., but gotta get the car up to to scratch for mapping and silverstone

**J-BO** · 24-02-2012 20:21

cant wait to hear the beast be unleashed..

**HuDeani_R32** · 25-02-2012 01:43

Is it something carbon or frp from a guy that was in Dartford by any chance? Lol as that's where a certian something I want is from haha! On another note have you come across them 32 indicators at all?

**Mattolodis** · 25-02-2012 19:24

Originally Posted by HuDeani_R32

Is it something carbon or frp from a guy that was in Dartford by any chance? Lol as that's where a certian something I want is from haha! On another note have you come across them 32 indicators at all?

No its not from him matey but it is a diffuser

I got it pretty cheap its made from frp, only as with drifting it normally ends up in pieces so didnt want to spend much.

Got on with fitting today to be fair i think i did an ok job considering its ment for an rx7..... I will get main pics up tomorrow after i have done final touches

Couple to get you thinking lol

**HuDeani_R32** · 25-02-2012 20:02

ah nice! Not the one I was looking at! Should look good though man. Maybe U should remove it on drift days to save it though

**dingdong** · 26-02-2012 16:18

shes looking mediocre matt u fitting it for saturday?

**Phil G** · 26-02-2012 16:24

aaah you bender i had that idea! it will look savage

LinkBack

Thread Tools

Display

Posting Permissions