Team 307 BDC build

[CMD 307]

Its time to post up some progress of my s14 build "Yes another s14"

When it comes to drifting im very much un-known ive done about 4 years of building setting up and competing in this car.
Ive wanted to build a comp drift car for a lot of years now and am finaly in the position to go for it. I am not a mechanic, fabricator or an engine tuner but im hoping to show that with a bit of back ground and a lot of ambition i can build a awsome drift machine. I will also be using lots of ideas from other peoples build pages.

Any advice you can give of if you spot anything i could be doing better just post a comment. If your in the aberdeen area drop me a comment as well.

Right it starts with a 23 hour drive down to gloucestershire and back to pick up the car









Adam was and wasn't happy to let it go at the same time





The RB20 box was nackered. wasn't going to handle what i had planed for it anyway



When i sorted everything out i was left with




First things first got to finish buildiing the garage





You might notice i have no lights! i will struggle away in the dark for the next few weeks!

[CMD 307]

The car hase to go back to bair metal










Anyone know what this is? think its the alarm controler





Cheif mechanic lee trying to look like he know what hes doing!

Before i go any further i decided to fit the rb25 box i got from a sound guy in dunfermlin sorry can't remeber your name. i used the dkyline gearbox mount and moved it back about 2 inches the engine and box is realy far back and as low as itl go

First the difference between the to gearboxes








The two props






Flanges are the same


out with the rb26



Tril fit of the rb25 box



Mount fabricated






The constant struggle with sound deadning


Still more to come out


Sized up for custom one piece shaft

Droped the sub frame out


Out with the fuel tank was blody heavy had half a tank in it.






Clean under hear





Slow progress im afraid keep any eye out for this build

[Jamie D]

looks like youre gonna be doing a proper job on this mate, looking forward to following and seeing how the build goes!

[Sam H]

Anyone know what this is? think its the alarm controler

That is the sensitivity controller for the internal alarm sensors.

Lozza asked earlier.

Nice build fella. Look forward to updates.

[babyfox92]

from aberdeen? like seeing projects like this happening locally

[Bigmann]

wow nice car mate

[CMD 307]

Thanks for the comments i hope to make some big progress over the next few weeks. maybe get some cutting done!

[Dunkz]

Alright dude, welcome along. There's loads of folk in the Aberdeen area with more s-bodies per population head than anywhere else in Scotland by a long shot. There's plenty of knowledge up here if you need any help or advice. We all meet up once a month for food or a piss up etc around Aberdeen. You'll have to get yourself along. There's also various night time activities that I'll explain in person.

[CMD 307]

Alright dude, welcome along. There's loads of folk in the Aberdeen area with more s-bodies per population head than anywhere else in Scotland by a long shot. There's plenty of knowledge up here if you need any help or advice. We all meet up once a month for food or a piss up etc around Aberdeen. You'll have to get yourself along. There's also various night time activities that I'll explain in person.

Thanks buddy i new there was thing of that sorts going on threw the 200sx forum im sure the more i get into the build and get into the hole 200sx thing ill get involved.

[CMD 307]

That is the sensitivity controller for the internal alarm sensors.

Lozza asked earlier.

Nice build fella. Look forward to updates.

Thanks yea that helps thought it was something of that sorts

[kwalker705]

good to see a local project going together.

If you need any help with painting, fibreglass parts , kevlar/carbon stuff....or just a hand in general with mechanical crap gimme a shout. I have too much spare time on my hands and I'm only up in the broch.

[CMD 307]

good to see a local project going together.

If you need any help with painting, fibreglass parts , kevlar/carbon stuff....or just a hand in general with mechanical crap gimme a shout. I have too much spare time on my hands and I'm only up in the broch.

Thanks i have got a few buddys that have a go at mechanicing for me. but i will be looking for a full chassie spray and some carbon panels for the inside so i will keep you in mind. A brocher, u no anyone who works at score?

[CMD 307]

Finaly got light so i can see what im doing now!



The diff oil cooler needs a bit of attention but hope to refurbish and re use it with a better thermostate or a switch.



Engine out and box off





Getting there with the wiring

[II TimmiTwoMillTurnover II]

Good work mate

I've had the hoonwagon for over a month now and defo missing that car, same power but it's way too stable compared to the Datsun.

Keep the updates coming, can see your going all out on this, my intentions but I'm a lazy fuker lol

[CMD 307]

Thanks buddy ^^^^ the chassie is realy clean for its age a few little rust bits that will clean up ok. so far delighted with it

More progress basicly down to chassie windows and suspencion. will get the grinder out tomorrow!!!!





has any one used or know of anyone who has used the sikky sway bar setup on the front of there engine swap s14?? Any feedback?

[jonny mac]

build looks great so far!! always wanted an s14 with an rb engine swap!....will be doing an s15 with a 6cylinder swap hopefully when i get back into cars once i'm on my feet again after buying property.

sent you a wee pm mate as i'm selling a few bits local in aberdeen and if you would need any let me know just thought since all my bits are painted kuro black also

Breaking s14 AWESOME PARTS 2871r.... aberdeen folks get offer first. HOUSE TIME! - SXOC Bulletin Board

good luck with the project.
cheers.

[II TimmiTwoMillTurnover II]

Fuk maaaan you have gone all out! If that was any lighter it would fly, even with 10j wheels it was sketchy so your gonna need a poo bag attached to the driver seat

I see my pikey brake mods are still in lol

Did you still want the front arb?

[CMD 307]

Fuk maaaan you have gone all out! If that was any lighter it would fly, even with 10j wheels it was sketchy so your gonna need a poo bag attached to the driver seat

I see my pikey brake mods are still in lol

Did you still want the front arb?

Ha yea and im about to cut the boot and the arches out so its going to be ultra light. Don't wory about the ARB im thinking about a custom one and it comes with the mounts so don't worry about it

[jonny mac]

i still think you should buy my works9 bodykit and rear overfenders :P :P any updates on this project mate?

[TAM7]

Really nice car mate, really nice garage space too!