Register
Page 1 of 4 123 ... LastLast
Results 1 to 20 of 78
  1. #1
    tail slider
    Join Date
    Jun 2015
    Posts
    142

    My Irish Jap reg zenki s14!

    Updated!!!
    Sr20det blacktop non vvt
    forged pistons
    cosworth headgasket
    tomie inlet cam
    hks exhaust cam
    rocker stoppers
    hks valve springs
    alloy winged sump
    ported
    cosworth valves
    cosworth conrods
    was running 360hp

    Cusco coilovers
    driftworks tension rods
    superpro rear links and anti rollbar bushings
    50mm over fenders
    uras front
    vertex sides
    origin streamline rear
    chargespeed carbon bootlid
    Front mount intercooler
    deep dish wheel
    3 inch cat back exhaust
    Stainless manifold
    s15 turbo
    s15 brakes
    17 inch work vskfs front
    17 inch ssr images on rear
    Engine damper
    uprated clutch
    cusco 2 way diff

    Full respray in red last year and underside sealed.






    plans are to get the arches filled with new wheels
    fit my omps i have
    sort the cooling as shroud of the car due to front mount need to relocate battery to the boot
    tidy the engine bay and more guages
    got an oil pressure and boost option guages and a new hks mushroom filter, filter fitted


    nct
    Last edited by michealkirwan; 25-07-2016 at 19:43.

  2. #2
    tail slider
    Join Date
    Jun 2015
    Posts
    142
    Ok a bit of an update.
    my passenger headlight full beam had no voltage so gonna run a wire across from driver side
    knock in coilover driver side. Done
    removed the drift bits sticker! Done
    driver door packed up so hardship to get door open the clip that holds the handle in was loose, fixed. Done
    wipers acting up stopping at middle of the window? changed motor and still same issue linkage was off but still have problem with it.
    need a few interior bits and getting a new washer bottle and fuse cover and that from petko if he has them also new clear side lights.Done
    got all these parts and fitted.
    also will be fitting a turbo timer boost and oil pressure guage plus rsm it already has a fcd i already had these laying around. the speedos not working so rsms for that.
    decided on the wheels i want too work vs will swap the advans for them if i can.
    pass the nct and fit my omps.

  3. #3
    tail slider
    Join Date
    Jun 2015
    Posts
    142
    Update time!
    went for nct failed on emissions tires wiring a brake hose etc loose bumper



    so done a few bits fixed bumper and hose got two new yokahama advan sports on the front


    then for the back my friend who does the tyres has an rx7 but took these off the back ventus s1 evo stupid wide!!
    285/35/ r18!



    also new pads front and back! may book another test!
    got a lambda sensor of aidan reilly
    Last edited by michealkirwan; 20-06-2015 at 09:57.

  4. #4
    tail slider
    Join Date
    Jun 2015
    Posts
    142
    silver rsm fitted with stand also hks ssv bov fitted.
    also sent off the tax book again as it had the original white on the book
    got it back today as red, had to go to nissan to get the car checked, chassis plate to the book
    taxed for three months
    few issues to sort such as the fan cowling going for electric fans id say as cowling wont fit
    noise in steering starting to think its the brake calipers as its constant noise until i brake.
    battery isint great shes needed a few jumpstarts, still have to retest it.
    need to spray wheels too and get guages in aswell as fix speedo


  5. #5
    tail slider
    Join Date
    Jun 2015
    Posts
    142
    gone for tracking this morning asked them to throw in lambda sensor while they were at it

  6. #6
    tail slider
    Join Date
    Jun 2015
    Posts
    142
    Ok update time my zenki has been through the nct 3 times and failing on emissions, sky high each time, the last time she had a lambda sensor a new cat and diptaine. will try ecu and check all gaskets for leaks etc.
    then car started getting sluggish as i drove it ended up not starting and still wont start. no spark so checked all coilpack etc cas unit so coil igniter im presuming so waiting on that part from lady 89 i might have monday.

    random drive with the toyotas!

    she is living on these!





    today i did this which cheered me up








    real happy with it

    tomorrow ill be cutting the inside of the overfenders to bring my wheels out more
    spraying the advan lips
    spraying my calipers and compounding headlights

    need to collect my bride low max and a set of 25mill spacers for the back
    find an alloy rad with twin fans also rear diffuser
    connect the coil igniter when it arrives.

  7. #7
    tail slider
    Join Date
    Jun 2015
    Posts
    142
    my new seat

  8. #8
    tail slider
    Join Date
    Jun 2015
    Posts
    142
    update

  9. #9
    tail slider
    Join Date
    Jun 2015
    Posts
    142
    Quote Originally Posted by michealkirwan View Post
    got the car back running the ecu was at fault. had a s14 non vvt one there tried and it worked. so i bought a coil igniter and cas unit for nothing.

  10. #10
    tail slider
    Join Date
    Jun 2015
    Posts
    142
    update cars driving ok. got these for a bargain in dublin image wheels was only two so i stuck two tyres on them. will be getting them tidied up and back to mint for the rear. need to alter pitch as its too narrow and offset as there out a mile!


    [/IMG]
    Last edited by michealkirwan; 14-08-2015 at 02:37.

  11. #11
    touge runner
    Join Date
    Nov 2010
    Posts
    163
    Don't fit electric fans. Massive no no with these.
    The viscous does a grand job.
    www.TunerLifestyle.co.uk - Automotive Apparel & Accessories

  12. #12
    tail slider
    Join Date
    Jun 2015
    Posts
    142

    finally passed the nct.
    lots of jobs to crack into now.

  13. #13
    tail slider
    Join Date
    Jun 2015
    Posts
    142

    picking these up for the rear tomorrow

  14. #14
    tail slider
    Join Date
    Jun 2015
    Posts
    142
    works vskfs on the back now. the lad i got them off has another for the front and a lead on another so will be on soon. need 50mill spacers.


  15. #15
    doughnutter
    Join Date
    Dec 2011
    Posts
    59
    christ they look lost in the back haha but should look real good once spacers are fitted

  16. #16
    tail slider
    Join Date
    Jun 2015
    Posts
    142
    Quote Originally Posted by Darenm View Post
    christ they look lost in the back haha but should look real good once spacers are fitted
    Yeah i know theyre hard to find but i always loved the works and had to put them on, i found 50 mill spacers and im collecting sunday so theyll be on then. will have pics once theyre on. Need lower skirts too!

  17. #17
    tail slider
    Join Date
    Jun 2015
    Posts
    142
    id be happy creating this

  18. #18
    gripper
    Join Date
    Oct 2009
    Location
    Kilkenny
    Posts
    27
    Quote Originally Posted by michealkirwan View Post
    id be happy creating this
    Will be the business if you get it looking like this!!
    Down...but never out!

  19. #19
    tail slider
    Join Date
    Mar 2012
    Posts
    92
    Yes make it look like that

  20. #20
    tail slider
    Join Date
    Jun 2015
    Posts
    142
    its not too far away. got a lend of enkeis rpf01s he has 4 for the front off a friend. love them already. love having rare and desirable rums. need extended wheel nuts and threw on some spacers. getting tracked in the morning. think its the back end is off.

 
Page 1 of 4 123 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •