Voodoo Slide S14.5 from France - Drifting forum

Voodoo Slide · 07-09-2007, 15:33

Hello everybody...
Let me introduce my drift project :
I found this beautiful 1994 Nissan silvia S14 in 2006, september...

Ok... It doesn't look very well...

Let's start to work.

A little bit of housework around the engine...

The inside is emptied !

Voodoo Slide · 07-09-2007, 15:33

2006, October

------------------------------

With a friend, we took the engine out of the car.

I began to sand.

Fitting of the front.

And I continued on the block...

Voodoo Slide · 07-09-2007, 15:34

2006, November

------------------------------

My new rollcage made by FABRICAGE in UK

My new wheels... TeamDynamics (Rimstock in UK) ProRace 12, 9x18 ET25 for front and rear.

Here is the back axle... There is some work to do...

I finished to clean the engine and mount Nismo 555cc injectors.

Voodoo Slide · 07-09-2007, 15:35

It does not more remain than to weld and paint !

The welds are finally ended !

It is the moment of the separation...
I took the car to a friend who is a painter.

Voodoo Slide · 07-09-2007, 15:36

2006, December

------------------------------

Electric harness.........

Head cover painting... with a hotgun !

Voodoo Slide · 07-09-2007, 15:36

2007, January

It moves a little...

Voodoo Slide · 07-09-2007, 15:37

Just for fun !

Here is my lazer cuting tool !

Voodoo Slide · 07-09-2007, 15:37

2007, Febuary

------------------------------

------------------------------

2007, March

------------------------------

Good news ! The car is painted. I can mount the front axle.

Voodoo Slide · 07-09-2007, 15:38

2007, April

------------------------------

Rear axle is here...

Axle is not here...

------------------------------

Let's work on the axle.

Voodoo Slide · 07-09-2007, 15:38

It finally took is right place.

------------------------------

------------------------------

I love riding on sr20 !

Voodoo Slide · 07-09-2007, 15:39

------------------------------

------------------------------

Long-awaited moment : The car is back on its 4 wheels !

Voodoo Slide · 07-09-2007, 15:39

2007, May

------------------------------

I worked hard all nights !

------------------------------

It begin to look like a car.

What you cant see is that the engine started for the first time since 3 years !

------------------------------

Bodykit fitting.

Voodoo Slide · 07-09-2007, 15:40

2007, June

------------------------------

New and very cheap door panels !

------------------------------

A friend has a MIDAS center. It's easier to tune the axles

Voodoo Slide · 07-09-2007, 15:40

My first drift training ! I spent more time in grass than on the track !

------------------------------

New steering wheel. that's better !

------------------------------

Crankcase protection

Voodoo Slide · 07-09-2007, 15:41

2007, July

------------------------------

Some pictures taken during my second drift training. It starts to smoke a little !

Here is a little video
YouTube - Voodoo_Drift_Training14_01

Voodoo Slide · 07-09-2007, 15:42

2007, August

------------------------------

My car is finished for this year. New decals and sponsoring stickers.
Pictures I took during a shooting with a GTI-mag, a french magazine

An inside view video
YouTube - Voodoo S14.5 Drift Pouilly - 01

What I can see when I enter my garage... love it !!!

Here is a list of the parts I already have on the car :

ENGINE :

- Z32 MAF sensor
- BLITZ LM SusPower air filter
- BLITZ LM front mount intercooler
- HKS SSQV Dump valve
- GARRETT GT2871R turbocharger
- Turbo stainless steel lines
- MEGAN RACING exhaust header
- TOMEI turbo elbow outlet
- XS-POWER complete exhaust system
- KOYO radiator
- SAMCO radiator hoses
- FLEX A LITE dual fans
- D.I.F. dual fans controller
- Oil cooler + stainless steel lines + oil filter relocation
- WALBRO fuel pump
- GREEDY fuel pressure regulator
- NISMO 555cc injectors
- Used JDM reprogrammed ECU
- APEXI AVCR Boost controller
- APEXI SAFC2 Piggyback ECU
- INNOVATE MOTORSPORT LM1 wideband O2 reader
- HKS/Denzo Iridium spark plugs
- Greedy style oil crankcase
- Engine torque damper
- Aluminium pulleys

TRANSMISSION :

- KAAZ 2 ways LSD
- EXEDY Stage 2 clutch kit
- FIDANZA flywheel
- Short shifter

FRAME :

- TEAM DYNAMICS ProRace 12 wheels 9x18" ET25 front & rear
- TOYO Proxes T1R front: 225/40/18 - rear: 245/40/18
- TEIN Super Drift coilover
- TEIN tie rod inner and end
- MOTORIA front and rear upper strut bar
- GOODRIDGE stainless steel brake lines
- BREMBO 330mm front brake discs
- 3G rear brake discs
- EBC GreenStuff front and rear brake pads
- NISMO - front under brace
- HARDRACE - Front and rear stabilizer links
- no name (big shit) rear traction arm, tension rod, camber arm and front tension rod (Some of those parts have been broken before my first drifting training... OEM parts return on the car ! Good lesson for me...)

INSIDE :

- FABRICAGE rollcage
- COBRA Imola S seats
- COBRA 4 points seatbelts harness
- NAMS low seat mount
- ORECA Nike steering wheel
- ORECA shift knob
- AC AutoTechnics S7 Gauges (turbo pressure, air/fuel ratio, oil temp, exhaust gaz temp)

BODY :

- CHARGESPEED S15 carbon hood
- CHARGESPEED S14 to S15 front fenders (+20mm each side)
- URAS S15 type4 front bumper
- URAS S14 type2 sideskirts
- URAS S14 type2 rear bumper
- TCS carbon mirrors
- NISSAN S15 radiator core
- NISSAN S15 headlights
- Black euro taillights

minos · 07-09-2007, 16:01

Wow simply awsome work on that car, every thing is just beutiful, even the grafix

NikDev · 07-09-2007, 16:03

Stunning! beautiful! Great job!

Nothing more to say

Motary · 07-09-2007, 16:12

Very nice looking car with a tasty spec list, wheels fit the car very well too!

Good luck with this

sideways.taff · 07-09-2007, 16:13

Very nice indeed

07-09-2007, 15:33	#1 (permalink)
Voodoo Slide gripper Join Date: Sep 2007 Location: near Dijon in France Posts: 25	Voodoo Slide S14.5 from France Hello everybody... Let me introduce my drift project : I found this beautiful 1994 Nissan silvia S14 in 2006, september... Ok... It doesn't look very well... Let's start to work. A little bit of housework around the engine... The inside is emptied !

07-09-2007, 15:41	#15 (permalink)
Voodoo Slide gripper Join Date: Sep 2007 Location: near Dijon in France Posts: 25	2007, July ------------------------------ Some pictures taken during my second drift training. It starts to smoke a little ! Here is a little video YouTube - Voodoo_Drift_Training14_01 Last edited by Voodoo Slide : 08-09-2007 at 12:51.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-09-2007, 15:33	#2 (permalink)
Voodoo Slide gripper Join Date: Sep 2007 Location: near Dijon in France Posts: 25	2006, October ------------------------------ With a friend, we took the engine out of the car. I began to sand. Fitting of the front. And I continued on the block...

07-09-2007, 15:34	#3 (permalink)
Voodoo Slide gripper Join Date: Sep 2007 Location: near Dijon in France Posts: 25	2006, November ------------------------------ My new rollcage made by FABRICAGE in UK My new wheels... TeamDynamics (Rimstock in UK) ProRace 12, 9x18 ET25 for front and rear. Here is the back axle... There is some work to do... I finished to clean the engine and mount Nismo 555cc injectors.

07-09-2007, 15:35	#4 (permalink)
Voodoo Slide gripper Join Date: Sep 2007 Location: near Dijon in France Posts: 25	It does not more remain than to weld and paint ! The welds are finally ended ! It is the moment of the separation... I took the car to a friend who is a painter.

07-09-2007, 15:36	#5 (permalink)
Voodoo Slide gripper Join Date: Sep 2007 Location: near Dijon in France Posts: 25	2006, December ------------------------------ Electric harness......... Head cover painting... with a hotgun !

07-09-2007, 15:36	#6 (permalink)
Voodoo Slide gripper Join Date: Sep 2007 Location: near Dijon in France Posts: 25	2007, January It moves a little...

07-09-2007, 15:37	#7 (permalink)
Voodoo Slide gripper Join Date: Sep 2007 Location: near Dijon in France Posts: 25	Just for fun ! Here is my lazer cuting tool !

07-09-2007, 15:37	#8 (permalink)
Voodoo Slide gripper Join Date: Sep 2007 Location: near Dijon in France Posts: 25	2007, Febuary ------------------------------ ------------------------------ 2007, March ------------------------------ Good news ! The car is painted. I can mount the front axle.

07-09-2007, 15:38	#9 (permalink)
Voodoo Slide gripper Join Date: Sep 2007 Location: near Dijon in France Posts: 25	2007, April ------------------------------ Rear axle is here... Axle is not here... ------------------------------ Let's work on the axle.

07-09-2007, 15:38	#10 (permalink)
Voodoo Slide gripper Join Date: Sep 2007 Location: near Dijon in France Posts: 25	It finally took is right place. ------------------------------ ------------------------------ I love riding on sr20 !

07-09-2007, 15:39	#11 (permalink)
Voodoo Slide gripper Join Date: Sep 2007 Location: near Dijon in France Posts: 25	------------------------------ ------------------------------ Long-awaited moment : The car is back on its 4 wheels !

07-09-2007, 15:39	#12 (permalink)
Voodoo Slide gripper Join Date: Sep 2007 Location: near Dijon in France Posts: 25	2007, May ------------------------------ I worked hard all nights ! ------------------------------ It begin to look like a car. What you cant see is that the engine started for the first time since 3 years ! ------------------------------ Bodykit fitting.

07-09-2007, 15:40	#13 (permalink)
Voodoo Slide gripper Join Date: Sep 2007 Location: near Dijon in France Posts: 25	2007, June ------------------------------ New and very cheap door panels ! ------------------------------ A friend has a MIDAS center. It's easier to tune the axles

07-09-2007, 15:40	#14 (permalink)
Voodoo Slide gripper Join Date: Sep 2007 Location: near Dijon in France Posts: 25	My first drift training ! I spent more time in grass than on the track ! ------------------------------ New steering wheel. that's better ! ------------------------------ Crankcase protection

07-09-2007, 15:42	#16 (permalink)
Voodoo Slide gripper Join Date: Sep 2007 Location: near Dijon in France Posts: 25	2007, August ------------------------------ My car is finished for this year. New decals and sponsoring stickers. Pictures I took during a shooting with a GTI-mag, a french magazine An inside view video YouTube - Voodoo S14.5 Drift Pouilly - 01 What I can see when I enter my garage... love it !!! Here is a list of the parts I already have on the car : ENGINE : - Z32 MAF sensor - BLITZ LM SusPower air filter - BLITZ LM front mount intercooler - HKS SSQV Dump valve - GARRETT GT2871R turbocharger - Turbo stainless steel lines - MEGAN RACING exhaust header - TOMEI turbo elbow outlet - XS-POWER complete exhaust system - KOYO radiator - SAMCO radiator hoses - FLEX A LITE dual fans - D.I.F. dual fans controller - Oil cooler + stainless steel lines + oil filter relocation - WALBRO fuel pump - GREEDY fuel pressure regulator - NISMO 555cc injectors - Used JDM reprogrammed ECU - APEXI AVCR Boost controller - APEXI SAFC2 Piggyback ECU - INNOVATE MOTORSPORT LM1 wideband O2 reader - HKS/Denzo Iridium spark plugs - Greedy style oil crankcase - Engine torque damper - Aluminium pulleys TRANSMISSION : - KAAZ 2 ways LSD - EXEDY Stage 2 clutch kit - FIDANZA flywheel - Short shifter FRAME : - TEAM DYNAMICS ProRace 12 wheels 9x18" ET25 front & rear - TOYO Proxes T1R front: 225/40/18 - rear: 245/40/18 - TEIN Super Drift coilover - TEIN tie rod inner and end - MOTORIA front and rear upper strut bar - GOODRIDGE stainless steel brake lines - BREMBO 330mm front brake discs - 3G rear brake discs - EBC GreenStuff front and rear brake pads - NISMO - front under brace - HARDRACE - Front and rear stabilizer links - no name (big shit) rear traction arm, tension rod, camber arm and front tension rod (Some of those parts have been broken before my first drifting training... OEM parts return on the car ! Good lesson for me...) INSIDE : - FABRICAGE rollcage - COBRA Imola S seats - COBRA 4 points seatbelts harness - NAMS low seat mount - ORECA Nike steering wheel - ORECA shift knob - AC AutoTechnics S7 Gauges (turbo pressure, air/fuel ratio, oil temp, exhaust gaz temp) BODY : - CHARGESPEED S15 carbon hood - CHARGESPEED S14 to S15 front fenders (+20mm each side) - URAS S15 type4 front bumper - URAS S14 type2 sideskirts - URAS S14 type2 rear bumper - TCS carbon mirrors - NISSAN S15 radiator core - NISSAN S15 headlights - Black euro taillights

07-09-2007, 16:01	#17 (permalink)
minos gripper Join Date: Jan 2007 Posts: 6	Wow simply awsome work on that car, every thing is just beutiful, even the grafix

07-09-2007, 16:03	#18 (permalink)
NikDev Drifts a Swede Join Date: Oct 2006 Location: Norway Posts: 373	Stunning! beautiful! Great job! Nothing more to say

07-09-2007, 16:12	#19 (permalink)
Motary tail slider Join Date: Nov 2006 Location: Estonia Posts: 131	Very nice looking car with a tasty spec list, wheels fit the car very well too! Good luck with this

07-09-2007, 16:13	#20 (permalink)
sideways.taff -NightWalkers- Join Date: Apr 2005 Location: West Wales Posts: 5,043	Very nice indeed