Mustang Powered S13 - Drifting forum

Flipfoot · 11-10-2007, 21:36

Following on from this: http://www.driftworks.com/forum/othe...ites-dust.html

I was at a loss as to what engine to put in. Then along came Alex(Suprmek1) from Welcome Page and the project was born.

We first talked about dropping a 2-JZ into her, but with only a budget of £3k , finding a nice lump with all the nessacery bits was proving to be futile.

Then we thought about an S2000 lump in. Again price was a stumbling block.

Then one day this little beauty presented its self on E-bay for a ridiculas price!

V8 POWAAAAAAZZZZZ!!
2001 Ford Mustang 4.6L V8 with all the bits needed for the conversion!

So its out with

And in with

This was what she looked like before work was started. Since then Ive stripped out all the mods from the engine, disconnected all the loom and other bits holding the lump in, ready for Alex to remove when he gets it back to the shop. Stripped all the interior out, dash, heater matrix ( Bloody heavy stuff you know), all ready for the V8 Power!

Current state of play: Alex has picked the car up from me in South London and took her back to Torquey (Top bloke for that

). Shes currently stripped bare and awaiting the engine to be deliverd from Scotland.

Will post more pics and write up as and when i get more info from Alex, although i dare say he will write up on here to to let you know how its all progressing!

STAY TUNED!!

PS: 'scuse the spelling and what not, but if you really must flame me for it, please phone this number

drax · 11-10-2007, 21:40

Muhaha! This will be a beast! Watching this project with anticipation

Username · 11-10-2007, 21:59

get vids up asap

Eddy · 11-10-2007, 22:18

V8 powaaaaazzzzzzzz !!!!

Flipfoot · 12-10-2007, 00:21

Added pics

Moffatt · 12-10-2007, 00:37

Yes just like mine, finiallt got mine all sorted and hit the 500bhp+ Mark

Good luck mate, need any help get in touch
John

Flipfoot · 12-10-2007, 00:48

Quote:

Originally Posted by Moffatt

Yes just like mine, finiallt got mine all sorted and hit the 500bhp+ Mark

Good luck mate, need any help get in touch
John

Sweet mate that would be cool to swap notes and what not!

Dex · 12-10-2007, 09:01

dumb-ass, you were keeping it a secret untill you were finished

Ed · 12-10-2007, 13:51

I'll be watching this closely

More pics etc please

ragge · 12-10-2007, 15:05

nice,
in Norway we have a 200sx s13 converted to a pontiac GTO LS1 engine with t56 trans. and it works great, incredible sound, good reliability.
V8 powah

turbo haus touge · 12-10-2007, 20:37

this is frickin awsome end of

harrietxxx · 12-10-2007, 20:44

OMG i love this already , cant wait to see it!!!!!! hats off to you for choosing yanky v8 powers

Stavros · 12-10-2007, 20:51

good plan lads.

speaking of mustangs, sunday maybe ill take a few pics of my DIY mustang 5litre twin turbo engine im building to show you.

PhatBob · 12-10-2007, 20:53

Love it! Funnily enough I was with the boys from Suffolk County Mantas today because they're putting one of these:

In a place it wasn't meant to be

That engine is really clean when you pull the EGR, and it's associated rubbish off.

Matt Jones · 12-10-2007, 20:55

Nutter! That's one hell of a project. Best of British to you

Flipfoot · 12-10-2007, 23:05

Quote:

Originally Posted by Dex

dumb-ass, you were keeping it a secret untill you were finished

I know I know, but i was too excited about it

, sue me

Quote:

Originally Posted by Stavros

good plan lads.

speaking of mustangs, sunday maybe ill take a few pics of my DIY mustang 5litre twin turbo engine im building to show you.

That would be cool ty Stav. Be nice to see a twin tubby, not decided on what im gonna do with mine yet, be it staying N/A with Trumpets, Tubby, or charged.

Will add more pics tomorrow, im too pisssed at mo :P

Stavros · 12-10-2007, 23:27

Ill quickly sling it together tomorrow to show how it looks, or maybe ill show it all in bits as ive decided to bite the bullet, get the dremmel out, and enlarge the combustion chambers and port the heads.

Either way its a proper low budget job, but im confident on 500bhp and 500lbft+ on stock bottomend, enough to make the block crack anyhow.

Got the turbos, manifolds, fuelling, everything really, so no more money really needed to spend, done that bit at least.

frick knows what car its going in though, ill worry about that after!

Flipfoot · 13-10-2007, 20:34

Well Thats the hole left in the engine block, and another part i managed to fish out from it.

Flipfoot · 13-10-2007, 20:37

Alex from K-Drift,

11-10-2007, 21:36	#1 (permalink)
Flipfoot Team S.E.C Join Date: Dec 2006 Location: South East England Posts: 1,424	Mustang Powered S13 Following on from this: http://www.driftworks.com/forum/othe...ites-dust.html I was at a loss as to what engine to put in. Then along came Alex(Suprmek1) from Welcome Page and the project was born. We first talked about dropping a 2-JZ into her, but with only a budget of £3k , finding a nice lump with all the nessacery bits was proving to be futile. Then we thought about an S2000 lump in. Again price was a stumbling block. Then one day this little beauty presented its self on E-bay for a ridiculas price! V8 POWAAAAAAZZZZZ!! 2001 Ford Mustang 4.6L V8 with all the bits needed for the conversion! So its out with And in with This was what she looked like before work was started. Since then Ive stripped out all the mods from the engine, disconnected all the loom and other bits holding the lump in, ready for Alex to remove when he gets it back to the shop. Stripped all the interior out, dash, heater matrix ( Bloody heavy stuff you know), all ready for the V8 Power! Current state of play: Alex has picked the car up from me in South London and took her back to Torquey (Top bloke for that). Shes currently stripped bare and awaiting the engine to be deliverd from Scotland. Will post more pics and write up as and when i get more info from Alex, although i dare say he will write up on here to to let you know how its all progressing! STAY TUNED!! PS: 'scuse the spelling and what not, but if you really must flame me for it, please phone this number Last edited by Flipfoot : 12-10-2007 at 00:30.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-10-2007, 21:40	#2 (permalink)
drax GFX / Web Dude Join Date: Jan 2005 Location: Sittingbourne, Kent Posts: 2,176	Muhaha! This will be a beast! Watching this project with anticipation

11-10-2007, 21:59	#3 (permalink)
Username Hates YOU Join Date: Jan 2007 Location: Bath Posts: 837	get vids up asap

11-10-2007, 22:18	#4 (permalink)
Eddy tail slider Join Date: Nov 2004 Location: Ljubljana,capital of Slovenia Posts: 142	V8 powaaaaazzzzzzzz !!!!

12-10-2007, 00:21	#5 (permalink)
Flipfoot Team S.E.C Join Date: Dec 2006 Location: South East England Posts: 1,424	Added pics

12-10-2007, 00:37	#6 (permalink)
Moffatt 4.6 V8 Mustang, BMW! Join Date: Sep 2004 Location: Warwick Posts: 413	Yes just like mine, finiallt got mine all sorted and hit the 500bhp+ Mark Good luck mate, need any help get in touch John

12-10-2007, 09:01	#8 (permalink)
Dex kut! Join Date: Nov 2004 Location: Clogsville Posts: 9,425	dumb-ass, you were keeping it a secret untill you were finished

12-10-2007, 13:51	#9 (permalink)
Ed dorifto kingu! Join Date: Mar 2006 Location: right next door to hell Posts: 4,177	I'll be watching this closely More pics etc please

12-10-2007, 15:05	#10 (permalink)
ragge doughnutter Join Date: Aug 2007 Location: N0rway Posts: 45	nice, in Norway we have a 200sx s13 converted to a pontiac GTO LS1 engine with t56 trans. and it works great, incredible sound, good reliability. V8 powah

12-10-2007, 20:37	#11 (permalink)
turbo haus touge me bdc 2009! Join Date: Jun 2005 Posts: 1,469	this is frickin awsome end of

12-10-2007, 20:44	#12 (permalink)
harrietxxx dorifto kingu! Join Date: May 2006 Location: Derbyshire Posts: 1,695	OMG i love this already , cant wait to see it!!!!!! hats off to you for choosing yanky v8 powers

12-10-2007, 20:51	#13 (permalink)
Stavros DEYTUKURJURBS Join Date: May 2005 Location: Cheltenham, Gloucestershire Posts: 10,232	good plan lads. speaking of mustangs, sunday maybe ill take a few pics of my DIY mustang 5litre twin turbo engine im building to show you.

12-10-2007, 20:53	#14 (permalink)
PhatBob PhinBob Join Date: Aug 2004 Location: Newmarket Posts: 1,738	Love it! Funnily enough I was with the boys from Suffolk County Mantas today because they're putting one of these: In a place it wasn't meant to be That engine is really clean when you pull the EGR, and it's associated rubbish off.

12-10-2007, 20:55	#15 (permalink)
Matt Jones gripper Join Date: Oct 2007 Posts: 21	Nutter! That's one hell of a project. Best of British to you

12-10-2007, 23:27	#17 (permalink)
Stavros DEYTUKURJURBS Join Date: May 2005 Location: Cheltenham, Gloucestershire Posts: 10,232	Ill quickly sling it together tomorrow to show how it looks, or maybe ill show it all in bits as ive decided to bite the bullet, get the dremmel out, and enlarge the combustion chambers and port the heads. Either way its a proper low budget job, but im confident on 500bhp and 500lbft+ on stock bottomend, enough to make the block crack anyhow. Got the turbos, manifolds, fuelling, everything really, so no more money really needed to spend, done that bit at least. frick knows what car its going in though, ill worry about that after!

13-10-2007, 20:34	#18 (permalink)
Flipfoot Team S.E.C Join Date: Dec 2006 Location: South East England Posts: 1,424	Well Thats the hole left in the engine block, and another part i managed to fish out from it.

13-10-2007, 20:37	#19 (permalink)
Flipfoot Team S.E.C Join Date: Dec 2006 Location: South East England Posts: 1,424	Alex from K-Drift,