Mr-Steveo's S14.5-2jz - Page 10 - Drifting forum

aaronblue · 19-12-2007, 11:14

Looking really good mate. its going to be an awsome car mate

Do-A-Skid · 19-12-2007, 21:31

shit me!
is looking mint.
gud on ya steveo

Polo · 27-12-2007, 21:02

Update update update

mint · 27-12-2007, 21:13

Quote:

Originally Posted by retrodan

MINT

what?

lol this thing looks awsum so far! Great job y0!

MR-steveo · 28-12-2007, 00:16

well got alot done i think today, did a good 12hrs.....

got the motor fitted in the correct position
constructed engine mounts (thanks polo for the loan of the engine mounts)
fully welded mounts and X member
fitted motor back in the hole
made all the templates for the gearbox mount
fitted the rad and made templates
fittted the intercooler, didint think it was gonna fit but it did in the end
fitted rear overfenders, but not sure on fixings yet might bolt them on or screw
cut all the offside arch out
ready to start welding all the parts together

sholud be able to put gearbox mount on tomorrow and finish arch

IM tired

retrodan · 28-12-2007, 00:19

sweet me boi, how bloody big is that intercooler!!!!! massive spec!!!

sideways.taff · 28-12-2007, 00:22

Cleco's rock!

Polo · 28-12-2007, 00:23

Fricking hell! you did crack on after i left!

I got very drunk and past out by 7pm

MR-steveo · 28-12-2007, 00:25

Quote:

Originally Posted by sideways.taff

Cleco's rock!

i love them, made puttin the overfenders on a joy!!!!!!! i keep buying them you can never have to meny........

MR-steveo · 28-12-2007, 00:26

Quote:

Originally Posted by Polo

Fricking hell! you did crack on after i left!

I got very drunk and past out by 7pm

felt like i was out in there in the feilds

sideways.taff · 28-12-2007, 00:28

Quote:

Originally Posted by MR-steveo

i love them, made puttin the overfenders on a joy!!!!!!! i keep buying them you can never have to meny........

Yeh lol, buy them a few at a time and then all of a sudden you've got loads of them and you could put a whole aeroplane together with them!

chunk · 28-12-2007, 00:48

Feck me captain!!

Good work man, i'll have to pop down one day and have a looksies

MR-steveo · 28-12-2007, 00:55

Quote:

Originally Posted by chunk

Feck me captain!!

Good work man, i'll have to pop down one day and have a looksies

ok dude

DC@Driftpromotion · 28-12-2007, 00:58

I just dribbled all over my desk

Loving this project, awesome handy work gone into this too.
Respect for all the work your puttin in it

Should be a bom when working

mascot · 28-12-2007, 01:06

awsome project mate and good welding skills wish i could weld like that

good luck with the rest of the project

Will_DW · 28-12-2007, 02:52

Looks sweet Steveo..

Workingg hardddd!!

tur8oboi · 28-12-2007, 03:06

i'm looking forward to all the cussing when the wiring comes into play :P

top work steveo!

Ian.G · 28-12-2007, 08:27

cookiemonster · 28-12-2007, 22:28

WOW u work as fast as mitch

superclarkey · 28-12-2007, 22:30

Will those engine mounts take the vibrations and strain of the powers your going to be running ? they look tidy made thats for sure, just a bit of 8mm plate would have been nice

lol

Did you copy a set that was already on the market mr.steveo ? if so what thinkness is that, like 5 mm ?

28-12-2007, 00:16	#185 (permalink)
MR-steveo TNS MAN CHILD Join Date: Nov 2004 Location: mk Posts: 2,192	ive been very busy............ he he well got alot done i think today, did a good 12hrs..... got the motor fitted in the correct position constructed engine mounts (thanks polo for the loan of the engine mounts) fully welded mounts and X member fitted motor back in the hole made all the templates for the gearbox mount fitted the rad and made templates fittted the intercooler, didint think it was gonna fit but it did in the end fitted rear overfenders, but not sure on fixings yet might bolt them on or screw cut all the offside arch out ready to start welding all the parts together sholud be able to put gearbox mount on tomorrow and finish arch IM tired

28-12-2007, 00:58	#194 (permalink)
DC@Driftpromotion spl dori master Join Date: Nov 2006 Location: Netherlands Posts: 264	I just dribbled all over my desk Loving this project, awesome handy work gone into this too. Respect for all the work your puttin in it Should be a bom when working Last edited by DC@Driftpromotion : 28-12-2007 at 01:00.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

19-12-2007, 11:14	#181 (permalink)
aaronblue spl dori master Join Date: Sep 2006 Location: In the deepest depths of the Forest of Dean Posts: 303	Looking really good mate. its going to be an awsome car mate

19-12-2007, 21:31	#182 (permalink)
Do-A-Skid ae86 Bamba Join Date: Sep 2007 Location: halesowen Posts: 465	shit me! is looking mint. gud on ya steveo

27-12-2007, 21:02	#183 (permalink)
Polo Team Green! Join Date: Aug 2006 Location: In the workshop! Posts: 2,446	Update update update

28-12-2007, 00:19	#186 (permalink)
retrodan celebs in car Join Date: Nov 2006 Location: sittingbourne,kent Posts: 3,034	sweet me boi, how bloody big is that intercooler!!!!! massive spec!!!

28-12-2007, 00:22	#187 (permalink)
sideways.taff -NightWalkers- Join Date: Apr 2005 Location: West Wales Posts: 5,279	Cleco's rock!

28-12-2007, 00:23	#188 (permalink)
Polo Team Green! Join Date: Aug 2006 Location: In the workshop! Posts: 2,446	Fricking hell! you did crack on after i left! I got very drunk and past out by 7pm

28-12-2007, 00:48	#192 (permalink)
chunk middle aged Join Date: Jun 2005 Location: Leicester Posts: 3,916	Feck me captain!! Good work man, i'll have to pop down one day and have a looksies

28-12-2007, 01:06	#195 (permalink)
mascot tail slider Join Date: Dec 2007 Posts: 126	awsome project mate and good welding skills wish i could weld like that good luck with the rest of the project

28-12-2007, 02:52	#196 (permalink)
Will_DW dorifto kingu! Join Date: May 2007 Location: Northampton Posts: 839	Looks sweet Steveo.. Workingg hardddd!!

28-12-2007, 03:06	#197 (permalink)
tur8oboi touge runner Join Date: Jun 2005 Posts: 157	i'm looking forward to all the cussing when the wiring comes into play :P top work steveo!

28-12-2007, 08:27	#198 (permalink)
Ian.G 86 ColdTurkey Join Date: Sep 2004 Location: Derby UK - Land of road legal race cars Posts: 1,971

28-12-2007, 22:28	#199 (permalink)
cookiemonster dorifto kingu! Join Date: Jun 2007 Location: barton on sea Posts: 535	WOW u work as fast as mitch

28-12-2007, 22:30	#200 (permalink)
superclarkey ______________ Join Date: Aug 2004 Posts: 9,052	Will those engine mounts take the vibrations and strain of the powers your going to be running ? they look tidy made thats for sure, just a bit of 8mm plate would have been nice lol Did you copy a set that was already on the market mr.steveo ? if so what thinkness is that, like 5 mm ?