The BradS14 Silvia! - Page 3 - Drifting forum

BRADs14 · 21-07-2008, 20:17

its defo the hicas i think. the car dont have nats either. do you think i could sale this item??

beezy: lol, it might be... or its the boost controller lol

Beezy · 21-07-2008, 20:32

hmmm could be!

Mattias · 21-07-2008, 21:47

Could always just take it off and see what happens

any more pics of the wheels?

Hammond · 12-09-2008, 10:42

oi, is this on the road yet gay boy?

LiGhTnInG · 14-09-2008, 11:15

BRADs14 · 18-10-2008, 19:14

Quote:

Originally Posted by LiGhTnInG

nooooooooooooooooooooooooooooo! thats gay

BRADs14 · 18-10-2008, 19:22

hey all, long awaited update.

i've been working very hard these last few months trying to juggle work and bouilding the car and the weather lol.

been pulling my hair out trying to get parts together.

first off, i have a hydro wand fitted now.

been making my fmic design work, pretty much all the front cut out, i'll have pic and info 2mo

here some pic's of my new wheels

also any got on here got the skills to make my arches from

this

to THIS

gaz_moose · 18-10-2008, 20:44

is it snowing in that last pic?
i aint goin down south winter kicked in!
plenty of folk on here can bash tin id offer to do it but cant be arsed
your new wheels are a joke right?

LiGhTnInG · 19-10-2008, 03:39

Quote:

Originally Posted by BRADs14

also any got on here got the skills to make my arches from

this

to THIS

Thats a pull with filler.

BRADs14 · 03-11-2008, 01:33

lil update.. after moving the car in to my new sponsers place (pure performance), i covered alot in the last week, which beats working on a drive way.

i have fitted rear camber arms, spacers, flared the arches and fitted the bodykit as much as possible...

here some pic's

more updates soon

Little Jon · 06-11-2008, 01:56

Looking good so far Brad, keep it up!

BRADs14 · 07-11-2008, 00:58

cheers mate, having a battle at the mo with the custom IC pipe work... nothing i cant tackel..

narcotic · 07-11-2008, 09:56

you still want those rear hicas eliminators?

Johnson · 07-11-2008, 23:10

Quote:

Originally Posted by Beezy

Power

422.4 Bhp, 326.6 ft/lb (@ 1 bar)... Dyno sheet to confirm

Engine
Late Model SR20 Engine (poss 94+ 180sx 'blacktop') with 'cooling fins' on block
HKS GT3040 Turbo
HKS Wastegate
HKS Manifold
HKS Downpipe
HKS 272 In/Ex Cams (Just Fitted)
HKS Step 2 Valve Springs (Just fitted)
Custom Made 100mm IC Piping
Greddy Intake Plenum
740cc Injectors
Infinity Large Throttle
Blitz Intercooler (For Supra)
SARD Fuel Pump
Nismo Adjustable Fuel Pressure Regulator
Earls Uprated Fuel Lines and Connectors
Large Triple Layer Radiator
HKS Induction Kit
Metal Suction Pipe
Braided Breather Pipes with Anodised Ends
Colour Coded Engine Cover
Aftermarket Exhaust System
Oil Catch Can
Apexi Rad Cap
Nismo Oil Cap
Metal Head Gasket
ARC Extended Sump
Weld Plug Cover

Thats from the fresh import PS13 in the for sale bit,
I think thats not far off what Ffrench is running too!

Get buildin boi!

have you maped ECU, or you using chip or what?

..can you tell me more about thouse mods..as i see them pretty good for my project as well..

CRsamS14a · 09-11-2008, 12:56

Cars looking good man! After going to Pure Performance yesterday i have to say im very impressed!! Nice setup. An cheers for helping to fit my new GT28R and manifold yesterday. i clearly did most of the work... (hold the torch):P. Its running great at the moment minus a few boost pipes blowing off. My fault

. I can see this garage is going to go places if you keep at it, just like your 14. Keep the piks coming. Just thought i would add your arch rolling technique was the funniest! actually turned out really good!

Ill come down a bit later on for the colder plugs.

retrodan · 09-11-2008, 16:42

about time dude, not seen you skid in along time buddy!!

looks good aswell!! so you end up doing similar to me with the fmic setup?

BRADs14 · 09-11-2008, 21:05

tell me about it, finally got the sponsorship i've been after for ages!! lol

yeah kinda the same i think after looking and researching hardcore i think your set-up aswell as polo and he other ppl that have done the same...it the best way.... a kit from apex, etc maybe be easy to fit, but the way i've done it and you have is the most clever engineering way, just take more work

BRADs14 · 10-11-2008, 01:45

just quick update again, Fmic is pretty much finished and we repaired the arch thanks to my mate evv with his filler skills

hydro is functional

FMIC

long live the arch

just a shot of the brakes and stuff

should be running this week.

anybody got any recommendtions on gearbox and diff oil (welded)?????

LiGhTnInG · 10-11-2008, 01:48

Quote:

Originally Posted by CRsamS14a

Cars looking good man! After going to Pure Performance yesterday i have to say im very impressed!! Nice setup. An cheers for helping to fit my new GT28R and manifold yesterday. i clearly did most of the work... (hold the torch):P. Its running great at the moment minus a few boost pipes blowing off. My fault

. I can see this garage is going to go places if you keep at it, just like your 14. Keep the piks coming. Just thought i would add your arch rolling technique was the funniest! actually turned out really good!

Ill come down a bit later on for the colder plugs.

Pure performance

Awesome setup there. Well recommended.

LiGhTnInG · 10-11-2008, 01:50

Quote:

Originally Posted by BRADs14

anybody got any recommendtions on gearbox and diff oil (welded)?????

You need a proper diff. It's time for you to upgrade.

09-11-2008, 12:56	#55 (permalink)
CRsamS14a gripper Join Date: Apr 2008 Posts: 11	Beast from the east Cars looking good man! After going to Pure Performance yesterday i have to say im very impressed!! Nice setup. An cheers for helping to fit my new GT28R and manifold yesterday. i clearly did most of the work... (hold the torch):P. Its running great at the moment minus a few boost pipes blowing off. My fault . I can see this garage is going to go places if you keep at it, just like your 14. Keep the piks coming. Just thought i would add your arch rolling technique was the funniest! actually turned out really good! Ill come down a bit later on for the colder plugs.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

21-07-2008, 20:17	#41 (permalink)
BRADs14 BDC 2009 Join Date: Jan 2007 Location: Hoddesdon Posts: 943	its defo the hicas i think. the car dont have nats either. do you think i could sale this item?? beezy: lol, it might be... or its the boost controller lol

21-07-2008, 20:32	#42 (permalink)
Beezy Pimp slider! Join Date: Oct 2006 Location: Ashford Posts: 1,629	hmmm could be!

21-07-2008, 21:47	#43 (permalink)
Mattias dangleberry Join Date: Feb 2007 Location: Sittingbourne, kent Posts: 430	Could always just take it off and see what happens any more pics of the wheels?

12-09-2008, 10:42	#44 (permalink)
Hammond oh, snap! Join Date: Jan 2005 Location: Canterbury Posts: 4,961	oi, is this on the road yet gay boy?

14-09-2008, 11:15	#45 (permalink)
LiGhTnInG Doricomotion Join Date: Aug 2005 Location: DriftRacing.co.uk Posts: 8,634

18-10-2008, 19:22	#47 (permalink)
BRADs14 BDC 2009 Join Date: Jan 2007 Location: Hoddesdon Posts: 943	hey all, long awaited update. i've been working very hard these last few months trying to juggle work and bouilding the car and the weather lol. been pulling my hair out trying to get parts together. first off, i have a hydro wand fitted now. been making my fmic design work, pretty much all the front cut out, i'll have pic and info 2mo here some pic's of my new wheels also any got on here got the skills to make my arches from this to THIS

18-10-2008, 20:44	#48 (permalink)
gaz_moose .MTM. Join Date: Jun 2005 Location: under your bed Posts: 3,277	is it snowing in that last pic? i aint goin down south winter kicked in! plenty of folk on here can bash tin id offer to do it but cant be arsed your new wheels are a joke right?

03-11-2008, 01:33	#50 (permalink)
BRADs14 BDC 2009 Join Date: Jan 2007 Location: Hoddesdon Posts: 943	lil update.. after moving the car in to my new sponsers place (pure performance), i covered alot in the last week, which beats working on a drive way. i have fitted rear camber arms, spacers, flared the arches and fitted the bodykit as much as possible... here some pic's more updates soon

06-11-2008, 01:56	#51 (permalink)
Little Jon SkidSkidWinWin Join Date: Jun 2006 Location: Essex Posts: 445	Looking good so far Brad, keep it up!

07-11-2008, 00:58	#52 (permalink)
BRADs14 BDC 2009 Join Date: Jan 2007 Location: Hoddesdon Posts: 943	cheers mate, having a battle at the mo with the custom IC pipe work... nothing i cant tackel..

07-11-2008, 09:56	#53 (permalink)
narcotic dorifto kingu! Join Date: Jul 2004 Location: North London Posts: 2,277	you still want those rear hicas eliminators?

09-11-2008, 16:42	#56 (permalink)
retrodan celebs in car Join Date: Nov 2006 Location: sittingbourne,kent Posts: 3,070	about time dude, not seen you skid in along time buddy!! looks good aswell!! so you end up doing similar to me with the fmic setup?

09-11-2008, 21:05	#57 (permalink)
BRADs14 BDC 2009 Join Date: Jan 2007 Location: Hoddesdon Posts: 943	tell me about it, finally got the sponsorship i've been after for ages!! lol yeah kinda the same i think after looking and researching hardcore i think your set-up aswell as polo and he other ppl that have done the same...it the best way.... a kit from apex, etc maybe be easy to fit, but the way i've done it and you have is the most clever engineering way, just take more work

10-11-2008, 01:45	#58 (permalink)
BRADs14 BDC 2009 Join Date: Jan 2007 Location: Hoddesdon Posts: 943	just quick update again, Fmic is pretty much finished and we repaired the arch thanks to my mate evv with his filler skills hydro is functional FMIC long live the arch just a shot of the brakes and stuff should be running this week. anybody got any recommendtions on gearbox and diff oil (welded)?????