Erick's Driftride. - Drifting forum

Erick · 11-04-2008, 10:41

After looking around here for some time it's time to put my car in the Driftworks Forum.

I'm Erick from the Netherlands and i'm drifting a BMW E36 325i 4dr. It's a daily driver and drift car in one.

Here are the specs of my car.

- E36 3.0 M3 diff.
- E36 M3 header.
- E36 M3 B-pipe.
- E36 M3 exhaust.
- STD susp kit. (height, bound, rebound and camber)
- Powerflex bushings. (M3 front, swaybars F+R, rear and diff)
- 25mm MTECH sway bar. (front)
- Brembo Max Brake disk. (front)
- 19mm MTECH sway bar. (rear)
- Brembo brake disk. (rear)
- BF Goodrich stainless steel brake lines.
- DOT 5 brake fluid.
- Ferrodo DS 2500 brake pads.
- Wilwood hydraulic handbrake.
- Wilwood PROPORTIONING VALVE.
- Sparco 3" 6 point seatbelt.(driver)
- Sparco 3" 4 point seatbelt. (Codriver)
- Sparco struth's ( Front and rear)
- Sparco PRO2000 driver seat.(FIA approved)
- Sparco SPRINT codriver seat. (FIA approved)
- Sparco mountingframe. (FIA approved)
- Sparco seatslider. (FIA approved)
- Suede stearingwheel with D1-Spec Snap Off.
- Stripped interieur.
- BMW style 42 rims size 7.5x17".
- Falken FK452 size 215-45-17.
- 15" Steelies with cheap ass tires for drifting.
- 195-50-15 Wanli S1080 Drift-tires.
- M3 taillights.

Here are some pics of my car from when i bought it up untill now.

My first mods.

My first drifting at the circuit of Zolder Belgium. At the end of this day i became a Clubmann Drifter with a drift licentice.

A couple of month later i wend to a Testtrack in Lelystad in Holland and my girlfriend shot some onboard movies .

After this i bought a lot of goodies.

Complete M3 header catback and tailsection.

More goodies.

Before i had my Wilwood had to build in my car i stripped out my interieur so we can work freely in my car.

Erick · 11-04-2008, 10:42

After that i worked on my suspension and turned my camberplates.

Also my airco system wend out of the car. The car lost almost 15kg of weight.

Pics from from the Circuit of Zandvoort.

Soon more.

ealoken · 11-04-2008, 11:04

ah, i love the BMWs in drifting

The Nordic and Norwegian Champion for 2007 used a BMWE30 with a E36M3 engine.

get your self a bether cam ang do some inboard

Cheers

Erick · 11-04-2008, 11:18

Those inboads vids where made with a photocam with the videomode. Now i'vo got a digital camcorder to shot the vids.

cookiemonster · 11-04-2008, 11:22

Wow man that looks really good some nice work there

ealoken · 11-04-2008, 11:28

Nice, looking forward to some moore drifting movies

here is a picture of the Norwegian BMW

Quail · 11-04-2008, 12:04

Nicely specced BMW!

Erick · 11-04-2008, 22:18

Placed a order today for 10x 195-50-15 Wanli 1080 Tyres. So i can play for a couple off days.

Two_Sheds · 11-04-2008, 22:44

i absolutely love to drift on wanlis. with your spec of car you'd do well to run a 225 for the faster circuits you seem to be luckily drifting on!

Jimthejunior · 12-04-2008, 08:41

Very noice dude, im sure iv seen this build thread on the nl forum.

Papercutout · 12-04-2008, 14:07

Nice car, nice mods, nice drifting!

whats so good about wanli's then guys? very grippy, or last ages, or what?

Andy.w · 12-04-2008, 14:31

nice mate, im liking that alot

Erick · 12-04-2008, 15:50

Some say that the are a hard compound so they last for ever. 2nd of al they were very cheap and wil make good smoke.

Erick · 13-04-2008, 20:55

It was a bizzy day today. I had to wash the car because it was standing under a tree for 1.5 weeks and it was the perfect target for the birds.

Also i've removed all my stickers for the outside off the car because the police was very attractive to my car because they have stoped me twice in 2 weeks and were also wondering if i had any seatbelts.

Hell yeah i ain't stupped. So here are the pics.

At the end of that i've painted my kidney's of the Beamuh.

Erick · 15-04-2008, 21:27

Just ordered a set of spacers for me stearingrack for more lock at Trampdrift.

Erick · 26-04-2008, 15:08

I've got them.

retrodan · 26-04-2008, 16:47

my next skid/dailey drve will be an e36 4dr, ur car just making me want one more!!!

good work dude

Erick · 23-05-2008, 19:36

At last all my Powerflex bushings were delived.

The next order is going to be:
-Brembo MAX on front and Brembo at the back.
-25mm Mtech Front sway bar.
-25mm Wheelspacers.

MikeeB · 23-05-2008, 21:32

Didn't know the Stig enjoyed drifting

Nice car and some nice angles on those corners

Erick · 05-06-2008, 20:42

25mm MTECH Front sway bar in tha house.

It's going to be mounted next week with all the new goodies.

11-04-2008, 10:41	#1 (permalink)
Erick spl dori master Join Date: Dec 2006 Location: Where Dex lives !! Posts: 273	Erick's Driftride. After looking around here for some time it's time to put my car in the Driftworks Forum. I'm Erick from the Netherlands and i'm drifting a BMW E36 325i 4dr. It's a daily driver and drift car in one. Here are the specs of my car. - E36 3.0 M3 diff. - E36 M3 header. - E36 M3 B-pipe. - E36 M3 exhaust. - STD susp kit. (height, bound, rebound and camber) - Powerflex bushings. (M3 front, swaybars F+R, rear and diff) - 25mm MTECH sway bar. (front) - Brembo Max Brake disk. (front) - 19mm MTECH sway bar. (rear) - Brembo brake disk. (rear) - BF Goodrich stainless steel brake lines. - DOT 5 brake fluid. - Ferrodo DS 2500 brake pads. - Wilwood hydraulic handbrake. - Wilwood PROPORTIONING VALVE. - Sparco 3" 6 point seatbelt.(driver) - Sparco 3" 4 point seatbelt. (Codriver) - Sparco struth's ( Front and rear) - Sparco PRO2000 driver seat.(FIA approved) - Sparco SPRINT codriver seat. (FIA approved) - Sparco mountingframe. (FIA approved) - Sparco seatslider. (FIA approved) - Suede stearingwheel with D1-Spec Snap Off. - Stripped interieur. - BMW style 42 rims size 7.5x17". - Falken FK452 size 215-45-17. - 15" Steelies with cheap ass tires for drifting. - 195-50-15 Wanli S1080 Drift-tires. - M3 taillights. Here are some pics of my car from when i bought it up untill now. My first mods. My first drifting at the circuit of Zolder Belgium. At the end of this day i became a Clubmann Drifter with a drift licentice. A couple of month later i wend to a Testtrack in Lelystad in Holland and my girlfriend shot some onboard movies . After this i bought a lot of goodies. Complete M3 header catback and tailsection. More goodies. Before i had my Wilwood had to build in my car i stripped out my interieur so we can work freely in my car. Last edited by Erick : 21-06-2008 at 17:20.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-04-2008, 10:42	#2 (permalink)
Erick spl dori master Join Date: Dec 2006 Location: Where Dex lives !! Posts: 273	After that i worked on my suspension and turned my camberplates. Also my airco system wend out of the car. The car lost almost 15kg of weight. Pics from from the Circuit of Zandvoort. Soon more.

11-04-2008, 11:04	#3 (permalink)
ealoken tail slider Join Date: Mar 2007 Location: Norway Posts: 138	ah, i love the BMWs in drifting The Nordic and Norwegian Champion for 2007 used a BMWE30 with a E36M3 engine. get your self a bether cam ang do some inboard Cheers

11-04-2008, 11:18	#4 (permalink)
Erick spl dori master Join Date: Dec 2006 Location: Where Dex lives !! Posts: 273	Those inboads vids where made with a photocam with the videomode. Now i'vo got a digital camcorder to shot the vids.

11-04-2008, 11:22	#5 (permalink)
cookiemonster dorifto kingu! Join Date: Jun 2007 Location: barton on sea Posts: 576	Wow man that looks really good some nice work there

11-04-2008, 11:28	#6 (permalink)
ealoken tail slider Join Date: Mar 2007 Location: Norway Posts: 138	Nice, looking forward to some moore drifting movies here is a picture of the Norwegian BMW

11-04-2008, 12:04	#7 (permalink)
Quail Kouki Monster Join Date: Feb 2006 Location: Milton Keynes & Portsmouth Posts: 1,146	Nicely specced BMW!

11-04-2008, 22:18	#8 (permalink)
Erick spl dori master Join Date: Dec 2006 Location: Where Dex lives !! Posts: 273	Placed a order today for 10x 195-50-15 Wanli 1080 Tyres. So i can play for a couple off days.

11-04-2008, 22:44	#9 (permalink)
Two_Sheds chaplad Join Date: Nov 2006 Location: Fife, Scotland Posts: 582	i absolutely love to drift on wanlis. with your spec of car you'd do well to run a 225 for the faster circuits you seem to be luckily drifting on!

12-04-2008, 08:41	#10 (permalink)
Jimthejunior Represent Join Date: Apr 2007 Posts: 1,935	Very noice dude, im sure iv seen this build thread on the nl forum.

12-04-2008, 14:07	#11 (permalink)
Papercutout dorifto kingu! Join Date: Oct 2007 Location: Nr. Oxford Posts: 1,074	Nice car, nice mods, nice drifting! whats so good about wanli's then guys? very grippy, or last ages, or what?

12-04-2008, 14:31	#12 (permalink)
Andy.w dorifto kingu! Join Date: Dec 2007 Posts: 650	nice mate, im liking that alot

12-04-2008, 15:50	#13 (permalink)
Erick spl dori master Join Date: Dec 2006 Location: Where Dex lives !! Posts: 273	Some say that the are a hard compound so they last for ever. 2nd of al they were very cheap and wil make good smoke.

13-04-2008, 20:55	#14 (permalink)
Erick spl dori master Join Date: Dec 2006 Location: Where Dex lives !! Posts: 273	It was a bizzy day today. I had to wash the car because it was standing under a tree for 1.5 weeks and it was the perfect target for the birds. Also i've removed all my stickers for the outside off the car because the police was very attractive to my car because they have stoped me twice in 2 weeks and were also wondering if i had any seatbelts. Hell yeah i ain't stupped. So here are the pics. At the end of that i've painted my kidney's of the Beamuh.

15-04-2008, 21:27	#15 (permalink)
Erick spl dori master Join Date: Dec 2006 Location: Where Dex lives !! Posts: 273	Just ordered a set of spacers for me stearingrack for more lock at Trampdrift.

26-04-2008, 15:08	#16 (permalink)
Erick spl dori master Join Date: Dec 2006 Location: Where Dex lives !! Posts: 273	I've got them.

26-04-2008, 16:47	#17 (permalink)
retrodan celebs in car Join Date: Nov 2006 Location: sittingbourne,kent Posts: 3,070	my next skid/dailey drve will be an e36 4dr, ur car just making me want one more!!! good work dude

23-05-2008, 19:36	#18 (permalink)
Erick spl dori master Join Date: Dec 2006 Location: Where Dex lives !! Posts: 273	At last all my Powerflex bushings were delived. The next order is going to be: -Brembo MAX on front and Brembo at the back. -25mm Mtech Front sway bar. -25mm Wheelspacers.

23-05-2008, 21:32	#19 (permalink)
MikeeB tail slider Join Date: Jul 2007 Location: Leicester/Swansea Posts: 75	Didn't know the Stig enjoyed drifting Nice car and some nice angles on those corners

05-06-2008, 20:42	#20 (permalink)
Erick spl dori master Join Date: Dec 2006 Location: Where Dex lives !! Posts: 273	25mm MTECH Front sway bar in tha house. It's going to be mounted next week with all the new goodies.