200sx s14 build - Page 3 - Drifting forum

Bunny · 05-05-2008, 15:58

No your right mate. It could've been the diff. But it is a standard diff. Suppose i could always try and find an auto diff to chuck in.

Mattyboi · 05-05-2008, 17:17

I ment what DTA management do you have, they do different models.

I recon you`d be better off sticking with the ratios you have and just driving it. Will be better for the bigger tracks and allow you to snatch 3rd later. No point building a car for pussy second gear courses. Also if the car has 300ish bhp then its not underpowered at all, maybe use different tyres if your struggling. And you should defo swap your mapper, no question.

Bunny · 05-05-2008, 19:11

Quote:

Originally Posted by Mattyboi

I ment what DTA management do you have, they do different models.

I recon you`d be better off sticking with the ratios you have and just driving it. Will be better for the bigger tracks and allow you to snatch 3rd later. No point building a car for pussy second gear courses. Also if the car has 300ish bhp then its not underpowered at all, maybe use different tyres if your struggling. And you should defo swap your mapper, no question.

Yeah good suggestion. I've been recommended to use Steve Saddler. So i think i'll give him a shout. I'll check the model DTA and post it up.

Bunny · 10-05-2008, 17:17

Right complete change of plan thanks to Bizzle for putting me on a massive downer on how shit the actual work is that the garage has done. O and the look on Matt Carters face when he saw it. LMAO.

Cheers to POLO for sorting me out with a gasket on the turbo. So much better now.

From Polo's. Looks like the DTA is going to be ripped out when i get a little dolla saved up and going back to scratch to try and get this setup correctly.

Ali · 10-05-2008, 17:44

Mine does a speedo indicated 75ish in 2nd mate and was totally boggo standard when I bought it so you'll just be running standard ratio's, looked good at silverstone, had the same problem as bogging in that centre bit and having to drop to 1st though, what tyre pressures were you running?

Bunny · 11-05-2008, 02:51

40psi on the rears mate and only with diddly 205's on. But after chatting with a few peeps today they said i'm losing so much low down power due to the DTA management. So that needs to get ripped out.

Mr Bizzle · 11-05-2008, 19:49

Quote:

Originally Posted by Bunny

Right complete change of plan thanks to Bizzle for putting me on a massive downer on how shit the actual work is that the garage has done. O and the look on Matt Carters face when he saw it. LMAO.

Really sorry dude,
Didn't mean to put you on a downer but it is possibly the single worst built S14 engine bay i have ever seen by a very long way. The work that was done by a certain "unnamable garage" was less than substandard and in areas downright dangerious. The guys that built it should be taken out into a yard and shot.

Im so angry for you mate. You have been c.u.n.t.e.d. off big time

EDIT:
BUT, we will sort it

No worries!

Quail · 11-05-2008, 19:59

Im gutted for you Rob. They've taken the piss bigtime

Not the first garage and definitely won't be the last

Polo · 11-05-2008, 20:08

I dont want to say too much on the matter but it is shocking and was dangerous!!

Rob, that bit more boost and the waist gate closed when off, make alot of differance

EDIT: OH, i see you today in the pod show leiflet? you seen it? im 99% sure its you.

Bunny · 11-05-2008, 22:15

Quote:

Originally Posted by Polo

I dont want to say too much on the matter but it is shocking and was dangerous!!

Rob, that bit more boost and the waist gate closed when off, make alot of differance

EDIT: OH, i see you today in the pod show leiflet? you seen it? im 99% sure its you.

Me in a Pod Leiflet? Now i'm confused LOL. Am i missing something here?

Yeah now the wastegate closes and the boost makes a massive difference mate really happy. Thanks alot. Still really Boggy. Hopefully i'll be able to get it to you soon to get the vvti back on and stuff.

cefiro_drifta · 11-05-2008, 23:35

glad things are finally gettin sorted mate and im sure lots of people will vouch for Sandlers mapping skills .

just hope it all works out soon for ya as the " unnamable garage " were beyond rediculous .

should name and shame the dirty flanges

kyle_gtr · 11-05-2008, 23:46

shit so the bastards take 2 years to do the car and cant even do it right what a bunch of twats and glad its getting sorted man and like mike said name and shame mate

MTW · 11-05-2008, 23:47

YEA you tell'em kyle...

kyle_gtr · 11-05-2008, 23:48

oh and what had they done wrong then??

sammysideways · 11-05-2008, 23:52

unlucky dude. must be gutted. glad the team green boys are sorting it for you though.

should name and shame dude stop anyone else using there service in the future

Mr Bizzle · 12-05-2008, 08:57

Quote:

Originally Posted by cefiro_drifta

glad things are finally gettin sorted mate and im sure lots of people will vouch for Sandlers mapping skills .

just hope it all works out soon for ya as the " unnamable garage " were beyond rediculous .

should name and shame the dirty flanges

Im guessing you mean Sadler

Mikey Mikey, tut tut.

EDnovaStarlet · 15-05-2008, 15:44

I would sue!

Shame the garage hasn't gone bust now you've got car back so others done get taken for a ride!

We all feel for you dude! There (I mean he's a proper tosser) a joke! Name and Shame

EDnovaStarlet · 15-05-2008, 15:49

Quote:

Originally Posted by Bunny

HAHA yeah it's obviously got a few. But most are disconnected. If you look on the first page at the 2nd pic i think you can see a few that aren't there. Doesn't have things like AFM e.t.c as it's all built into the DTA.

Sorry i'm not that Technical.

O and after alot of thought. The WING is going. Not sure if it's going to be replaced with a Bigger and Wider one or just leave it off.

NO,

keep the WING we need some where flat-ish on the car to rest the beer when working on it, Dan will agree!

JulesS14200 · 16-05-2008, 01:02

Quote:

Originally Posted by kyle_gtr

oh and what had they done wrong then??

You tell us Mr motorsport guru

Bunny · 17-05-2008, 22:01

Right they are ignoring me completely about giving me a receipt.

Time to name and shame as they must be doing some sort of Tax Fraud. So i will be calling the Tax\VAT people on Monday.

FRANKENSTEIN MOTORSPORT IN HEATH AND REACH

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-05-2008, 15:58	#41 (permalink)
Bunny Poor Join Date: Feb 2006 Location: In the sky Posts: 2,064	No your right mate. It could've been the diff. But it is a standard diff. Suppose i could always try and find an auto diff to chuck in.

05-05-2008, 17:17	#42 (permalink)
Mattyboi InitialD erby Join Date: Jul 2004 Location: Derby Posts: 4,645	I ment what DTA management do you have, they do different models. I recon you`d be better off sticking with the ratios you have and just driving it. Will be better for the bigger tracks and allow you to snatch 3rd later. No point building a car for pussy second gear courses. Also if the car has 300ish bhp then its not underpowered at all, maybe use different tyres if your struggling. And you should defo swap your mapper, no question.

10-05-2008, 17:17	#44 (permalink)
Bunny Poor Join Date: Feb 2006 Location: In the sky Posts: 2,064	Right complete change of plan thanks to Bizzle for putting me on a massive downer on how shit the actual work is that the garage has done. O and the look on Matt Carters face when he saw it. LMAO. Cheers to POLO for sorting me out with a gasket on the turbo. So much better now. From Polo's. Looks like the DTA is going to be ripped out when i get a little dolla saved up and going back to scratch to try and get this setup correctly.

10-05-2008, 17:44	#45 (permalink)
Ali dorifto kingu! Join Date: Sep 2005 Location: South of Brum Posts: 832	Mine does a speedo indicated 75ish in 2nd mate and was totally boggo standard when I bought it so you'll just be running standard ratio's, looked good at silverstone, had the same problem as bogging in that centre bit and having to drop to 1st though, what tyre pressures were you running?

11-05-2008, 02:51	#46 (permalink)
Bunny Poor Join Date: Feb 2006 Location: In the sky Posts: 2,064	40psi on the rears mate and only with diddly 205's on. But after chatting with a few peeps today they said i'm losing so much low down power due to the DTA management. So that needs to get ripped out.

11-05-2008, 19:59	#48 (permalink)
Quail Kouki Monster Join Date: Feb 2006 Location: Milton Keynes & Portsmouth Posts: 1,077	Im gutted for you Rob. They've taken the piss bigtime Not the first garage and definitely won't be the last

11-05-2008, 20:08	#49 (permalink)
Polo Team Green! Join Date: Aug 2006 Location: In the workshop! Posts: 2,447	I dont want to say too much on the matter but it is shocking and was dangerous!! Rob, that bit more boost and the waist gate closed when off, make alot of differance EDIT: OH, i see you today in the pod show leiflet? you seen it? im 99% sure its you.

11-05-2008, 23:35	#51 (permalink)
cefiro_drifta mad pointing munkey Join Date: Oct 2005 Location: surrey Posts: 11,742	glad things are finally gettin sorted mate and im sure lots of people will vouch for Sandlers mapping skills . just hope it all works out soon for ya as the " unnamable garage " were beyond rediculous . should name and shame the dirty flanges

11-05-2008, 23:46	#52 (permalink)
kyle_gtr dorifto kingu! Join Date: Sep 2007 Location: bapchild near sittingbourne Posts: 1,033	shit so the bastards take 2 years to do the car and cant even do it right what a bunch of twats and glad its getting sorted man and like mike said name and shame mate

11-05-2008, 23:47	#53 (permalink)
MTW STREET DICK Join Date: Jan 2008 Location: Lympstone cdo Posts: 1,005	YEA you tell'em kyle...

11-05-2008, 23:48	#54 (permalink)
kyle_gtr dorifto kingu! Join Date: Sep 2007 Location: bapchild near sittingbourne Posts: 1,033	oh and what had they done wrong then??

11-05-2008, 23:52	#55 (permalink)
sammysideways dorifto kingu! Join Date: Sep 2004 Posts: 7,475	unlucky dude. must be gutted. glad the team green boys are sorting it for you though. should name and shame dude stop anyone else using there service in the future

15-05-2008, 15:44	#57 (permalink)
EDnovaStarlet RWD Carless Join Date: Nov 2005 Location: Milton Keynes Posts: 513	I would sue! Shame the garage hasn't gone bust now you've got car back so others done get taken for a ride! We all feel for you dude! There (I mean he's a proper tosser) a joke! Name and Shame

17-05-2008, 22:01	#60 (permalink)
Bunny Poor Join Date: Feb 2006 Location: In the sky Posts: 2,064	Right they are ignoring me completely about giving me a receipt. Time to name and shame as they must be doing some sort of Tax Fraud. So i will be calling the Tax\VAT people on Monday. FRANKENSTEIN MOTORSPORT IN HEATH AND REACH