Ps13 1jz Swap - Page 3 - Drifting forum

**James** · 07-05-2008, 10:33

Rev It Up!!!!!

Beezy · 07-05-2008, 18:47

Brap brap!!!

Greg you Cheating hore! Car looks good dude, good build expect nothing less

DavidRuston · 07-05-2008, 21:01

progress dude

sweet

RandomGuy · 08-05-2008, 00:09

greg you aint doing stuff in halfs are ya!!

awesome mate!!!!!!!!!

Diskovod · 08-05-2008, 17:15

D00d!!! You kick the stuff for real! Great build! Waiting for the results

tech · 08-05-2008, 17:19

If you don't mind me asking what sort of money do the 1jz engines go for?

jakobsen · 08-05-2008, 18:49

Very nice project (-: Awsome engine cant wait until you get it fired up (-:

cptsideways · 08-05-2008, 21:01

£600 can buy you a bare engine, £800 ish for a complete one plus loom etc

You can buy a rough JZ30 Soarer for a grand though, that's where I'd get one from

-***JOKER***- · 08-05-2008, 21:03

Quote:

Originally Posted by cptsideways

£600 can buy you a bare engine, £800 ish for a complete one plus loom etc

You can buy a rough JZ30 Soarer for a grand though, that's where I'd get one from

from where do you get the engine?

cptsideways · 08-05-2008, 21:06

Quote:

Originally Posted by -***JOKER***-

from where do you get the engine?

As in what cars they came in??

JZZ30 Soarer's the blobby ones most commonly, JZA70 Supra Mark III rare & Chaser/MarkII's even rarer.

Man up in Sheffield breaks Soarer's he's usually on Ebay

bigsilly · 10-05-2008, 00:07

I have done a few more bits an pieces yesterday.
i had a look at the antiroll bar fitting, the standard bar dosnt fit as the sump of the 1jz gets in the way.
so i turned it backwards and fitted it to the chassis legs behind the front subframe

I made some mounts and welded them to the chassis legs

this is how it came out hope it works

Will_DW · 10-05-2008, 00:11

Awesome project, fair play!

**Phil** · 10-05-2008, 00:14

Looks like it'll work a treat

.. I didn't realise the ARB was a prob with the swap. I guess there may actually some advantages to my engine being pushed back so far after all

(grasping at straws I know

)

bigsilly · 10-05-2008, 00:53

Quote:

Originally Posted by Phil

Looks like it'll work a treat

.. I didn't realise the ARB was a prob with the swap. I guess there may actually some advantages to my engine being pushed back so far after all

(grasping at straws I know

)

yeah the only advantage apart from it being amazing to drive

felt pretty good just driving it round our car park the other day i rekon its gona be badass

**Mitch** · 10-05-2008, 06:22

Novel way of dealing with that problem

It's coming along well mate

Jimthejunior · 10-05-2008, 17:04

Im sure bon got a bare engine for just under 400 notes, not too long along. Although the prices are going to be going up up and away from now on i bet.

Anyway top work greg.

doz · 10-05-2008, 17:22

If you hunt around you can get the engines cheap. What costs is the bellhousing. I paid more for the bellhousing than the gearbox

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-05-2008, 10:33	#41 (permalink)
James Lights out! Join Date: Jul 2004 Location: Birmingham UK Posts: 7,425	Rev It Up!!!!!

07-05-2008, 18:47	#42 (permalink)
Beezy I AM MCLOVIN Join Date: Oct 2006 Location: Ashford Posts: 1,383	Brap brap!!! Greg you Cheating hore! Car looks good dude, good build expect nothing less

07-05-2008, 21:01	#43 (permalink)
DavidRuston is away Join Date: Jul 2005 Posts: 1,615	progress dude sweet

08-05-2008, 00:09	#44 (permalink)
RandomGuy Team Green Join Date: Aug 2005 Location: Manchester Posts: 6,373	greg you aint doing stuff in halfs are ya!! awesome mate!!!!!!!!!

08-05-2008, 17:15	#45 (permalink)
Diskovod touge runner Join Date: May 2006 Location: St. Petersburg Posts: 157	D00d!!! You kick the stuff for real! Great build! Waiting for the results

08-05-2008, 17:19	#46 (permalink)
tech Garage-Tech Join Date: Apr 2007 Location: Cardiff Posts: 361	If you don't mind me asking what sort of money do the 1jz engines go for?

08-05-2008, 18:49	#47 (permalink)
jakobsen gripper Join Date: Aug 2007 Location: Denmark Posts: 3	Very nice project (-: Awsome engine cant wait until you get it fired up (-:

08-05-2008, 21:01	#48 (permalink)
cptsideways Pimms O'clock Join Date: Aug 2004 Location: N Dorset Posts: 1,709	£600 can buy you a bare engine, £800 ish for a complete one plus loom etc You can buy a rough JZ30 Soarer for a grand though, that's where I'd get one from

10-05-2008, 00:07	#51 (permalink)
bigsilly tail slider Join Date: May 2006 Location: brum Posts: 95	I have done a few more bits an pieces yesterday. i had a look at the antiroll bar fitting, the standard bar dosnt fit as the sump of the 1jz gets in the way. so i turned it backwards and fitted it to the chassis legs behind the front subframe I made some mounts and welded them to the chassis legs this is how it came out hope it works

10-05-2008, 00:11	#52 (permalink)
Will_DW dorifto kingu! Join Date: May 2007 Location: Northampton Posts: 834	Awesome project, fair play!

10-05-2008, 00:14	#53 (permalink)
Phil 7JZGTE Join Date: Jul 2004 Location: Birmingham Posts: 7,213	Looks like it'll work a treat .. I didn't realise the ARB was a prob with the swap. I guess there may actually some advantages to my engine being pushed back so far after all (grasping at straws I know )

10-05-2008, 06:22	#55 (permalink)
Mitch Driftgarage Join Date: Jul 2004 Location: Derby fulltime Posts: 9,875	Novel way of dealing with that problem It's coming along well mate

10-05-2008, 17:04	#56 (permalink)
Jimthejunior Represent Join Date: Apr 2007 Posts: 1,656	Im sure bon got a bare engine for just under 400 notes, not too long along. Although the prices are going to be going up up and away from now on i bet. Anyway top work greg.

10-05-2008, 17:22	#57 (permalink)
doz animal!! Join Date: Apr 2007 Location: Shropshire/Worcestershire Posts: 1,526	If you hunt around you can get the engines cheap. What costs is the bellhousing. I paid more for the bellhousing than the gearbox