My SX - Drifting forum

Anth4130 · 19-06-2008, 21:18

Whatever happens will go in here

(one at the front)

And people who moan at sound deadening removal, shame on you! I love it

Sticky

Mid primering

I only got one arch done - my back started giving me greif, so it'll take me a while to get the whole thing done unless my back magically hurrys up and fixes itself

I dunno what the plans involve for it, I was gonna rebuild a CA... I'm thinking of RB25... who knows

Anth4130 · 20-06-2008, 16:16

An hour and halfs work from today, back tapped out

I think I have some help tomorrow and Sunday though

I found a chisel too hardcore, seemed to dig into the metal a bit... hammer + screwdriver worked perfect

xborninthefightx · 20-06-2008, 16:46

It took me about 4-5 days to finish taking all the shit off

I had to use petrol to get rid of the little bits at the end and that was the long and hard part really.

Anth4130 · 22-06-2008, 15:10

Had some help today (just under 2 hours work)

just got the back of the arches to finish off, then it's time to go underneath the seats

Before

After (ran out of paint...)

I should really get around to cleaning out all the mess

It will actually be going black

Anth4130 · 08-07-2008, 14:19

Dun dun dunnnnn

Just need to sort out the wiring... blue reverse lights

Debating whether to keep it white or get it resprayed black.. hmm

Silvia front end sooooon!

tritalc · 08-07-2008, 14:47

Could have saved some hassle in that first pic by swapping front quarters with your mate!!!!! Hope the back aint bad btw!!!!

driftnething · 08-07-2008, 20:54

lol i thought the same ! (front swap)

nice job on sound deadening, been doing that tonight myself...
man i cant wait to finish that job it sucks !!!!!

martin_2069 · 09-07-2008, 19:35

did u say u needed a ca 2 rebuild i have 1 that needs bairings replaced if ure intrested Pm me.

Anth4130 · 13-07-2008, 20:38

Already got one thanks

z32 MAF in
Stage 3 chip in
444s will be bought later
GT3071R en route

Painted a rocker cover... I'd of had the other one done too but one of the bolts (screws, whatever you wanna call em) rounded off :/

Anth4130 · 15-07-2008, 15:34

It's a little dirty, and gonna redo it again when I rebuild the engine... overall I'm happy with it

Removed a bit more tar today too, gonna get some pipe freeze from B&Q and use that!

affy · 18-07-2008, 00:37

looking good mate your getting there

are you spraying with a gun or just rattle cans, the finish looks good

Seano · 18-07-2008, 01:43

rocker covers look the dogs mate! top work, keep it up.

Anth4130 · 18-07-2008, 12:01

The rocker cover was from a can

My new snail

GT3071r

Im hoping to start ripping the engine out soon so I can start repairing metal, while waiting for money/parts to rebuild the engine

19-06-2008, 21:18	#1 (permalink)
Anth4130 touge runner Join Date: Jan 2006 Location: Hartlepool Posts: 194	My SX Whatever happens will go in here (one at the front) And people who moan at sound deadening removal, shame on you! I love it Sticky Mid primering I only got one arch done - my back started giving me greif, so it'll take me a while to get the whole thing done unless my back magically hurrys up and fixes itself I dunno what the plans involve for it, I was gonna rebuild a CA... I'm thinking of RB25... who knows Last edited by Anth4130 : 19-06-2008 at 21:23.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

20-06-2008, 16:16	#2 (permalink)
Anth4130 touge runner Join Date: Jan 2006 Location: Hartlepool Posts: 194	An hour and halfs work from today, back tapped out I think I have some help tomorrow and Sunday though I found a chisel too hardcore, seemed to dig into the metal a bit... hammer + screwdriver worked perfect

20-06-2008, 16:46	#3 (permalink)
xborninthefightx dorifto kingu! Join Date: May 2007 Location: Ashford, Middlesex Posts: 541	It took me about 4-5 days to finish taking all the shit off I had to use petrol to get rid of the little bits at the end and that was the long and hard part really.

22-06-2008, 15:10	#4 (permalink)
Anth4130 touge runner Join Date: Jan 2006 Location: Hartlepool Posts: 194	Had some help today (just under 2 hours work) just got the back of the arches to finish off, then it's time to go underneath the seats Before After (ran out of paint...) I should really get around to cleaning out all the mess It will actually be going black

08-07-2008, 14:19	#5 (permalink)
Anth4130 touge runner Join Date: Jan 2006 Location: Hartlepool Posts: 194	Dun dun dunnnnn Just need to sort out the wiring... blue reverse lights Debating whether to keep it white or get it resprayed black.. hmm Silvia front end sooooon!

08-07-2008, 14:47	#6 (permalink)
tritalc freakin bats Join Date: Oct 2007 Location: Glasvegas Posts: 399	Could have saved some hassle in that first pic by swapping front quarters with your mate!!!!! Hope the back aint bad btw!!!!

08-07-2008, 20:54	#7 (permalink)
driftnething tail slider Join Date: Sep 2007 Location: Cornwall Posts: 128	lol i thought the same ! (front swap) nice job on sound deadening, been doing that tonight myself... man i cant wait to finish that job it sucks !!!!!

09-07-2008, 19:35	#8 (permalink)
martin_2069 touge runner Join Date: May 2008 Location: Ware Posts: 207	did u say u needed a ca 2 rebuild i have 1 that needs bairings replaced if ure intrested Pm me.

13-07-2008, 20:38	#9 (permalink)
Anth4130 touge runner Join Date: Jan 2006 Location: Hartlepool Posts: 194	Already got one thanks z32 MAF in Stage 3 chip in 444s will be bought later GT3071R en route Painted a rocker cover... I'd of had the other one done too but one of the bolts (screws, whatever you wanna call em) rounded off :/

15-07-2008, 15:34	#10 (permalink)
Anth4130 touge runner Join Date: Jan 2006 Location: Hartlepool Posts: 194	It's a little dirty, and gonna redo it again when I rebuild the engine... overall I'm happy with it Removed a bit more tar today too, gonna get some pipe freeze from B&Q and use that!

18-07-2008, 00:37	#11 (permalink)
affy F.Y.E Join Date: Apr 2007 Location: southall Posts: 587	looking good mate your getting there are you spraying with a gun or just rattle cans, the finish looks good

18-07-2008, 01:43	#12 (permalink)
Seano doughnutter Join Date: Aug 2007 Location: Wirral, Merseyside Posts: 51	rocker covers look the dogs mate! top work, keep it up.

18-07-2008, 12:01	#13 (permalink)
Anth4130 touge runner Join Date: Jan 2006 Location: Hartlepool Posts: 194	The rocker cover was from a can My new snail GT3071r Im hoping to start ripping the engine out soon so I can start repairing metal, while waiting for money/parts to rebuild the engine