thegosson 180sx drift project - Page 2 - Drifting forum

thegosson · 21-08-2008, 12:19

this arrived yesterday so had to fit it there and then.

the before:

during:

and the after:

not much i know but still waiting for lots of stuff to arrive, i'll keep yez posted

thegosson · 29-08-2008, 21:00

Quote:

Originally Posted by thegosson

started stripping the car out and found this under the driver side rear speaker mounting bracket.

anyone know what it is and do i need it?

still trying to find out what this thing is???? anyone???

thegosson · 31-08-2008, 16:24

got hammers and chisels out, once the brother got wind of a bit of distruction about to take place he was well on for giving me a hand. check out the big happy head on him.

and then hours later not so happy but sticking at it.

eventualy we got it down to this.

so all that was left to do wa paint it, so thats what i did.

YashioFactory · 31-08-2008, 20:21

nice,

what is it that you have to remove?

tar kinda stuff isit?

MR-steveo · 31-08-2008, 20:38

sound deadening

thegosson · 01-09-2008, 00:24

yep sound deadening.it's a bit of a bitch to remove but you wouldn't believe the weight of the stuff when all gathered up and put in a bag, so should be worth the effort

affy · 01-09-2008, 12:10

love a red top sr20det, good luck with the project matey

thegosson · 03-09-2008, 20:12

not sure if this is an uprated/upgraded ecu or what. it has a kakimoto racing sticker on it. dont see why someone would pop a stiker on it and then cover it up with the kick pannel. has anyone come accross one of these before that could maybe tell me more about it?

the other label on it is a nissan remanufactured blaah blaah! sorry about poor quality pictures there off my phone.

scottymills · 04-09-2008, 00:30

looking niceee.....

how did u do the interior, use a rattle can or brush ?

thegosson · 04-09-2008, 00:56

cheers.... both. i used hammerite with a brush for the front end where it needs to be more dureable ie people getting in and out etc.... and then rattle canned the back end.

thegosson · 05-10-2008, 16:27

filled up the holes that were left when i removed the spoiler and ariel etc.

just quick sprayed it up to keep it protected from the atmosphere for now

driftireland · 05-10-2008, 16:38

Still have to tackle the front half on my sound deadening.. Not looking forward to it! You know Petey yeah? I must call over some weekend to have a goo at your machine in the metal

thegosson · 03-11-2008, 22:19

right so got the dash out

then assembled the cage to make sure it all went together before it goes into the car

dash ready for marking and cutting to accomodate the cage

couldnt help meself ,had to take a snap of the old girl

thegosson · 30-11-2008, 20:01

up she goes on the lift

thegosson · 30-11-2008, 20:16

clean as a whistle!

thegosson · 30-11-2008, 20:19

thegosson · 30-11-2008, 20:25

diff out!!!!

then the arms shafts etc....

thegosson · 30-11-2008, 20:31

then the subframe was droped out

on the floor and ready to have the bushes removed

driftireland · 30-11-2008, 20:35

When and where are you hoping to have her first outing lad?

thegosson · 30-11-2008, 20:35

fuel tank removed

21-08-2008, 12:19	#21 (permalink)
thegosson spl dori master Join Date: Dec 2007 Location: Ireland Posts: 251	update this arrived yesterday so had to fit it there and then. the before: during: and the after: not much i know but still waiting for lots of stuff to arrive, i'll keep yez posted

31-08-2008, 16:24	#23 (permalink)
thegosson spl dori master Join Date: Dec 2007 Location: Ireland Posts: 251	update got hammers and chisels out, once the brother got wind of a bit of distruction about to take place he was well on for giving me a hand. check out the big happy head on him. and then hours later not so happy but sticking at it. eventualy we got it down to this. so all that was left to do wa paint it, so thats what i did. Last edited by thegosson : 31-10-2008 at 18:43.

03-09-2008, 20:12	#28 (permalink)
thegosson spl dori master Join Date: Dec 2007 Location: Ireland Posts: 251	a lil something i found when stripping it not sure if this is an uprated/upgraded ecu or what. it has a kakimoto racing sticker on it. dont see why someone would pop a stiker on it and then cover it up with the kick pannel. has anyone come accross one of these before that could maybe tell me more about it? the other label on it is a nissan remanufactured blaah blaah! sorry about poor quality pictures there off my phone.

05-10-2008, 16:27	#31 (permalink)
thegosson spl dori master Join Date: Dec 2007 Location: Ireland Posts: 251	update filled up the holes that were left when i removed the spoiler and ariel etc. just quick sprayed it up to keep it protected from the atmosphere for now Last edited by thegosson : 05-10-2008 at 18:10.

03-11-2008, 22:19	#33 (permalink)
thegosson spl dori master Join Date: Dec 2007 Location: Ireland Posts: 251	update right so got the dash out then assembled the cage to make sure it all went together before it goes into the car dash ready for marking and cutting to accomodate the cage couldnt help meself ,had to take a snap of the old girl Last edited by thegosson : 03-11-2008 at 22:37.

31-08-2008, 20:21	#24 (permalink)
YashioFactory dorifto kingu! Join Date: Nov 2005 Posts: 859	nice, what is it that you have to remove? tar kinda stuff isit?

31-08-2008, 20:38	#25 (permalink)
MR-steveo TNS MAN CHILD Join Date: Nov 2004 Location: mk Posts: 2,268	sound deadening

01-09-2008, 00:24	#26 (permalink)
thegosson spl dori master Join Date: Dec 2007 Location: Ireland Posts: 251	yep sound deadening.it's a bit of a bitch to remove but you wouldn't believe the weight of the stuff when all gathered up and put in a bag, so should be worth the effort

01-09-2008, 12:10	#27 (permalink)
affy Frontyard Join Date: Apr 2007 Location: ub1 3aj Posts: 674	love a red top sr20det, good luck with the project matey

04-09-2008, 00:30	#29 (permalink)
scottymills doughnutter Join Date: Aug 2008 Location: Sheffield + Ipswich Posts: 45	looking niceee..... how did u do the interior, use a rattle can or brush ?

04-09-2008, 00:56	#30 (permalink)
thegosson spl dori master Join Date: Dec 2007 Location: Ireland Posts: 251	cheers.... both. i used hammerite with a brush for the front end where it needs to be more dureable ie people getting in and out etc.... and then rattle canned the back end.

05-10-2008, 16:38	#32 (permalink)
driftireland Learner Join Date: Jun 2008 Location: Meath, Ireland Posts: 272	Still have to tackle the front half on my sound deadening.. Not looking forward to it! You know Petey yeah? I must call over some weekend to have a goo at your machine in the metal

30-11-2008, 20:01	#34 (permalink)
thegosson spl dori master Join Date: Dec 2007 Location: Ireland Posts: 251	update up she goes on the lift

30-11-2008, 20:16	#35 (permalink)
thegosson spl dori master Join Date: Dec 2007 Location: Ireland Posts: 251	update clean as a whistle!

30-11-2008, 20:19	#36 (permalink)
thegosson spl dori master Join Date: Dec 2007 Location: Ireland Posts: 251	update

30-11-2008, 20:25	#37 (permalink)
thegosson spl dori master Join Date: Dec 2007 Location: Ireland Posts: 251	update diff out!!!! then the arms shafts etc....

30-11-2008, 20:31	#38 (permalink)
thegosson spl dori master Join Date: Dec 2007 Location: Ireland Posts: 251	update then the subframe was droped out on the floor and ready to have the bushes removed

30-11-2008, 20:35	#39 (permalink)
driftireland Learner Join Date: Jun 2008 Location: Meath, Ireland Posts: 272	When and where are you hoping to have her first outing lad?

30-11-2008, 20:35	#40 (permalink)
thegosson spl dori master Join Date: Dec 2007 Location: Ireland Posts: 251	update fuel tank removed

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode