My liner - Drifting forum

Japster · 10-07-2008, 02:06

Hey guys,

here's some pics of my r33 as it is atm.

Partial Spec list is as follows

Blitz Intercooler
M's K&N Filter (weird that when from Japan??)
Bullet Exhaust, Turbo back no silencers

HID Headlamp Conversion

Cusco LSD
(Still having a proper look to see if anything else is done,so will update list as I go....)

Apexi SAFCII Black
Blitz Oil Temp
Blitz Water Temp
Blitz Boost Gauge
Driftworks Harness
Bride Seat
Cusco Drift Handbrake
Extended Gear Knob
6 Point Cusco Rollcage with Full Cross Braces
Stripped Boot and Rear

Cusco Adj Coil Overs
Cusco Front Strut Brace
Tein Front and rear Adjustable Arms
Uprated Steering Rack Ball Joints and Arms

Full G-Sports Bodykit
SpeedStar Professor Alloys 9 x 18" Front and 10 x 19" Rears
Whole car resprayed in H.o.K Metal Flake Black

All thanks to Yashio Factory

The car pulled 285bhp @ 0.7bar at Santa Pod last weekend, Apexi AVCR is on its way

Will keep this updated as I go along

Quail · 10-07-2008, 03:30

Menacing. Love the wheel fitment.

Thats not MK is it?

Japster · 13-07-2008, 18:06

cheers dude.

MK?

Love the S14.

topi · 13-07-2008, 18:08

That looks fking sweeeet. I think I'd de-spoiler it and then it'd be perfect in my eyes.

By MK I think he means Milton-Keynes

Japster · 13-07-2008, 18:19

cheers Topi, I was thinking de-spoiler. Might take some pics of it with and without and do a poll

the photos were taken in Uckfield, East Sussex.

I need to get hold of a hub stud, one of them decided to strip the thread this morning.

DOH!

Jas

Japster · 13-07-2008, 18:23

Got some photos from a Jap meet I went to last week. Think the bottom one looks amazing!

robbs · 13-07-2008, 18:25

nicest r33 i've seen in a while

yes definately lose the spoiler

but they look a bit shit with no spoiler at all so get this one (boot spoiler, not roof spoiler).

JDL NISSAN SKYLINE R33 GTS - ROOF + BOOT SPOILER on eBay, also Body Modifications, Exterior Styling, Car Tuning Styling, Cars, Parts Vehicles (end time 25-Sep-08 15:28:18 BST)

turbo-tastic · 13-07-2008, 18:29

Not usually a fan of R33's, but that has an amazing stance

topi · 13-07-2008, 18:36

Whats the deal with the front bumper though, funny texture to it :S

Japster · 13-07-2008, 19:07

when it came over from japan, the front bumper was damaged. So I repaired it and sprayed it in black. No point getting it sprayed in HOS black ice because it will just keep getting knocked about.

Needs another coat though .

Jas

Quail · 13-07-2008, 20:04

Just realised its an 18/19 stagger. Thats why the stance is so hard. VERY nice!

adomz · 13-07-2008, 21:05

this r33 is one of the best looking i have ever seen! love it!

adam

Japster · 13-07-2008, 21:40

cheers for the comments guys.

the stance is amazing, the rear arches have been profesionly rolled to fit the 19 x10's in

Plus im running 225/45/18 front and 245/35/19 rear, stretched a bit

Jas

Quail · 13-07-2008, 22:13

Im going to run 245s on my 10s. Dont suppose you know the offset of your rears?

Japster · 13-07-2008, 22:16

will have a look for you tomorow mate. I've got a hubscentric spacer on the rear, will find the size of that as well.

Jas

Japster · 06-08-2008, 18:29

Sorry it's taken me ages to get back to you mate, been busy with work.

The rears have a 5 offset, with a 25mm spacer.

hope this helps mate.

Jas

Japster · 06-08-2008, 18:37

update

had some new tyres fitted to the front, damn camber!

The most impractical car i've ever had, but i enjoy it too much.

Jas

superclarkey · 06-08-2008, 18:37

Do you want to sell the wheels ?

Japster · 06-08-2008, 18:41

I'm not selling up, nooo way.

I was looking at a new set of wheels but nothing else will suit it

sara · 06-08-2008, 18:42

realy nice love the wheels

10-07-2008, 02:06	#1 (permalink)
Japster gripper Join Date: Mar 2008 Posts: 25	My liner Hey guys, here's some pics of my r33 as it is atm. Partial Spec list is as follows Blitz Intercooler M's K&N Filter (weird that when from Japan??) Bullet Exhaust, Turbo back no silencers HID Headlamp Conversion Cusco LSD (Still having a proper look to see if anything else is done,so will update list as I go....) Apexi SAFCII Black Blitz Oil Temp Blitz Water Temp Blitz Boost Gauge Driftworks Harness Bride Seat Cusco Drift Handbrake Extended Gear Knob 6 Point Cusco Rollcage with Full Cross Braces Stripped Boot and Rear Cusco Adj Coil Overs Cusco Front Strut Brace Tein Front and rear Adjustable Arms Uprated Steering Rack Ball Joints and Arms Full G-Sports Bodykit SpeedStar Professor Alloys 9 x 18" Front and 10 x 19" Rears Whole car resprayed in H.o.K Metal Flake Black All thanks to Yashio Factory The car pulled 285bhp @ 0.7bar at Santa Pod last weekend, Apexi AVCR is on its way Will keep this updated as I go along

13-07-2008, 18:25	#7 (permalink)
robbs MANJI MAN Join Date: Apr 2005 Location: FAREHAM (Almost-Portsmouth-ish) Posts: 3,592	nicest r33 i've seen in a while yes definately lose the spoiler but they look a bit shit with no spoiler at all so get this one (boot spoiler, not roof spoiler). JDL NISSAN SKYLINE R33 GTS - ROOF + BOOT SPOILER on eBay, also Body Modifications, Exterior Styling, Car Tuning Styling, Cars, Parts Vehicles (end time 25-Sep-08 15:28:18 BST) Last edited by robbs : 13-07-2008 at 18:28.

06-08-2008, 18:37	#17 (permalink)
Japster gripper Join Date: Mar 2008 Posts: 25	update had some new tyres fitted to the front, damn camber! The most impractical car i've ever had, but i enjoy it too much. Jas Last edited by Japster : 06-08-2008 at 18:45.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-07-2008, 03:30	#2 (permalink)
Quail Kouki Monster Join Date: Feb 2006 Location: Milton Keynes & Portsmouth Posts: 1,012	Menacing. Love the wheel fitment. Thats not MK is it?

13-07-2008, 18:06	#3 (permalink)
Japster gripper Join Date: Mar 2008 Posts: 25	cheers dude. MK? Love the S14.

13-07-2008, 18:08	#4 (permalink)
topi Shh Cha Muhf Join Date: May 2005 Location: Leicestershire/Derby Posts: 4,114	That looks fking sweeeet. I think I'd de-spoiler it and then it'd be perfect in my eyes. By MK I think he means Milton-Keynes

13-07-2008, 18:19	#5 (permalink)
Japster gripper Join Date: Mar 2008 Posts: 25	cheers Topi, I was thinking de-spoiler. Might take some pics of it with and without and do a poll the photos were taken in Uckfield, East Sussex. I need to get hold of a hub stud, one of them decided to strip the thread this morning. DOH! Jas

13-07-2008, 18:23	#6 (permalink)
Japster gripper Join Date: Mar 2008 Posts: 25	Got some photos from a Jap meet I went to last week. Think the bottom one looks amazing!

13-07-2008, 18:29	#8 (permalink)
turbo-tastic 4 finger fail Join Date: Mar 2006 Location: looking for my C-Spanners Posts: 3,843	Not usually a fan of R33's, but that has an amazing stance

13-07-2008, 18:36	#9 (permalink)
topi Shh Cha Muhf Join Date: May 2005 Location: Leicestershire/Derby Posts: 4,114	Whats the deal with the front bumper though, funny texture to it :S

13-07-2008, 19:07	#10 (permalink)
Japster gripper Join Date: Mar 2008 Posts: 25	when it came over from japan, the front bumper was damaged. So I repaired it and sprayed it in black. No point getting it sprayed in HOS black ice because it will just keep getting knocked about. Needs another coat though . Jas

13-07-2008, 20:04	#11 (permalink)
Quail Kouki Monster Join Date: Feb 2006 Location: Milton Keynes & Portsmouth Posts: 1,012	Just realised its an 18/19 stagger. Thats why the stance is so hard. VERY nice!

13-07-2008, 21:05	#12 (permalink)
adomz Fixin`Repairin Join Date: Apr 2005 Location: London, Ilford, UK Posts: 1,350	this r33 is one of the best looking i have ever seen! love it! adam

13-07-2008, 21:40	#13 (permalink)
Japster gripper Join Date: Mar 2008 Posts: 25	cheers for the comments guys. the stance is amazing, the rear arches have been profesionly rolled to fit the 19 x10's in Plus im running 225/45/18 front and 245/35/19 rear, stretched a bit Jas

13-07-2008, 22:13	#14 (permalink)
Quail Kouki Monster Join Date: Feb 2006 Location: Milton Keynes & Portsmouth Posts: 1,012	Im going to run 245s on my 10s. Dont suppose you know the offset of your rears?

13-07-2008, 22:16	#15 (permalink)
Japster gripper Join Date: Mar 2008 Posts: 25	will have a look for you tomorow mate. I've got a hubscentric spacer on the rear, will find the size of that as well. Jas

06-08-2008, 18:29	#16 (permalink)
Japster gripper Join Date: Mar 2008 Posts: 25	Sorry it's taken me ages to get back to you mate, been busy with work. The rears have a 5 offset, with a 25mm spacer. hope this helps mate. Jas

06-08-2008, 18:37	#18 (permalink)
superclarkey Mood=Badical! Join Date: Aug 2004 Location: Birmingham-spec Posts: 8,769	Do you want to sell the wheels ?

06-08-2008, 18:41	#19 (permalink)
Japster gripper Join Date: Mar 2008 Posts: 25	I'm not selling up, nooo way. I was looking at a new set of wheels but nothing else will suit it

06-08-2008, 18:42	#20 (permalink)
sara doughnutter Join Date: Jun 2008 Location: North East, Co Durham Posts: 62	realy nice love the wheels