s13.5 run around - Drifting forum

skyprince · 10-07-2008, 20:36

I bought this from e

about a year ago and havent realy done any thing with it,the turbo/manifold gasket was blowing so i changed that,and fitted a Kaaz 2 way.any way thats about it so far But i have put a kit on it and rattle caned it in so that it looks ok to drive around in.Here are some pics.
As i bought it !

bumper removed for trial fit of new one

trial fit

and then for paint

and refit

Then trial fit rear...this bumper is a joke!replikit your kits are sh*t!DO NOT BYE ANY KITS FROM THEM!!!!!!!!!!!!!

above the number plate i can get three fingers in there.i nearly got a club hammer out to teach this fu*king bumper a lesson!any way as i did not want to tack this piece of sh*t back of the car as it was a twat to fit the first time, i sprayed it on there.

and the finished car,not perfect by any means but batter than driving around with an unpainted kit

next job is 5 stud conversion and some coilovers,i got some front ones but not the rears if any one has some please

skyprince · 10-07-2008, 20:40

Forgot this one!

baggsy340 · 10-07-2008, 20:54

v v v sexy

Beezy · 10-07-2008, 20:59

Yerr man, looks well good about time i remember you buying the front bumper USC last year!! haha

Good work.

Andy.w · 10-07-2008, 21:23

nice one dude looking good.
(i brought your s12)

skyprince · 10-07-2008, 21:25

Quote:

Originally Posted by Andy.w

nice one dude looking good.
(i brought your s12)

i know and you fucked it right up!!!!!!lol.......Hows it going mate,you at round 5 BDC?

skyprince · 10-07-2008, 21:28

Quote:

Originally Posted by Beezy

Yerr man, looks well good about time i remember you buying the front bumper USC last year!! haha

Good work.

yeah but i bought the bumper for my s14.looks good on here though......better than the rear bumper!
Cheers for the coments dude see ya soon!

Motary · 10-07-2008, 21:53

Try fitting the standard rear bumper's metal parts underneath the new one, should sit better then, or just make a support bracket for it.

skyprince · 10-07-2008, 21:58

Quote:

Originally Posted by Motary

Try fitting the standard rear bumper's metal parts underneath the new one, should sit better then, or just make a support bracket for it.

cheers.....i will sort something out,but for now i can live with it

royal · 10-07-2008, 22:06

Looking good dude

slam it and come to Lydden!

Chris_200SX · 10-07-2008, 22:14

looking good, but if your not happy with the bumper fit then get them to give you refund.

2DRIFT · 10-07-2008, 22:17

Most s13 GRP rear bumpers do that, just refit it with the foam and support bracket from a uk s13, will take a bit of cutting the foam to make it fit, but will support the lip and stop it sagging!

Ade · 11-07-2008, 08:55

Quote:

Originally Posted by 2DRIFT

Most s13 GRP rear bumpers do that, just refit it with the foam and support bracket from a uk s13, will take a bit of cutting the foam to make it fit, but will support the lip and stop it sagging!

What he said

Even my genuine URAS one was like that when fitted

TwinturboCH · 11-07-2008, 09:13

Quote:

Originally Posted by Ade

What he said

Even my genuine URAS one was like that when fitted

Exactly, EVERY bumper does that.

Put the right brackets on your car before you slag people's kits off, fool

baggsy340 · 11-07-2008, 09:29

hudson i wouldnt call him a fool if i was u son.... hes alot bigger then us dude lol..
iv seen the bumper and i no some dont fit all that well but that re bumper from replikit is bad!! and if it was me i would of sent it back a long time a go..

royal · 11-07-2008, 09:46

Looking at your sig, I don't reckon yours if fitting that well either haha

MJG · 11-07-2008, 09:57

If your bumper is sagging there then cable tie it or fit the bumper bracket as others have said - not a mensa puzzle

How you think any fibreglass kit is going to fit unless it's reinforced or mega gay and thick?

baggsy340 · 11-07-2008, 10:03

Quote:

Originally Posted by royal

Looking at your sig, I don't reckon yours if fitting that well either haha

driver that is ..... lol my kit fitted the tits....

200shaun · 11-07-2008, 11:45

Nice car mate. I was at the auction in liverpool docks when this was sold i had a look around it an it was in good nick when i saw it.

xborninthefightx · 11-07-2008, 12:25

That looks total bad ass,

when you bring it to a skid day. With the rear bumper, you think thats bad wait till you see what mine looks like

Will see you tomorow at EDC matey

10-07-2008, 20:36	#1 (permalink)
skyprince spl dori master Join Date: Nov 2006 Location: southwick nr brighton west sussex Posts: 297	s13.5 run around I bought this from e about a year ago and havent realy done any thing with it,the turbo/manifold gasket was blowing so i changed that,and fitted a Kaaz 2 way.any way thats about it so far But i have put a kit on it and rattle caned it in so that it looks ok to drive around in.Here are some pics. As i bought it ! bumper removed for trial fit of new one trial fit and then for paint and refit Then trial fit rear...this bumper is a joke!replikit your kits are sht!DO NOT BYE ANY KITS FROM THEM!!!!!!!!!!!!! above the number plate i can get three fingers in there.i nearly got a club hammer out to teach this fuking bumper a lesson!any way as i did not want to tack this piece of sh*t back of the car as it was a twat to fit the first time, i sprayed it on there. and the finished car,not perfect by any means but batter than driving around with an unpainted kit next job is 5 stud conversion and some coilovers,i got some front ones but not the rears if any one has some please

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-07-2008, 20:40	#2 (permalink)
skyprince spl dori master Join Date: Nov 2006 Location: southwick nr brighton west sussex Posts: 297	Forgot this one!

10-07-2008, 20:54	#3 (permalink)
baggsy340 dorifto kingu! Join Date: Mar 2007 Location: s1 world essex Posts: 815	v v v sexy

10-07-2008, 20:59	#4 (permalink)
Beezy Pimp slider! Join Date: Oct 2006 Location: Ashford Posts: 1,673	Yerr man, looks well good about time i remember you buying the front bumper USC last year!! haha Good work.

10-07-2008, 21:23	#5 (permalink)
Andy.w dorifto kingu! Join Date: Dec 2007 Posts: 650	nice one dude looking good. (i brought your s12)

10-07-2008, 21:53	#8 (permalink)
Motary tail slider Join Date: Nov 2006 Location: Estonia Posts: 134	Try fitting the standard rear bumper's metal parts underneath the new one, should sit better then, or just make a support bracket for it.

10-07-2008, 22:06	#10 (permalink)
royal S1- F.T break! Join Date: Nov 2005 Posts: 4,853	Looking good dude slam it and come to Lydden!

10-07-2008, 22:14	#11 (permalink)
Chris_200SX -NightWalkers- Join Date: Aug 2005 Location: S.Wales Posts: 1,412	looking good, but if your not happy with the bumper fit then get them to give you refund.

10-07-2008, 22:17	#12 (permalink)
2DRIFT spl dori master Join Date: Aug 2005 Location: Bournemouth Posts: 392	Most s13 GRP rear bumpers do that, just refit it with the foam and support bracket from a uk s13, will take a bit of cutting the foam to make it fit, but will support the lip and stop it sagging!

11-07-2008, 09:29	#15 (permalink)
baggsy340 dorifto kingu! Join Date: Mar 2007 Location: s1 world essex Posts: 815	hudson i wouldnt call him a fool if i was u son.... hes alot bigger then us dude lol.. iv seen the bumper and i no some dont fit all that well but that re bumper from replikit is bad!! and if it was me i would of sent it back a long time a go..

11-07-2008, 09:46	#16 (permalink)
royal S1- F.T break! Join Date: Nov 2005 Posts: 4,853	Looking at your sig, I don't reckon yours if fitting that well either haha

11-07-2008, 09:57	#17 (permalink)
MJG e30 of Death Join Date: Oct 2004 Location: Derby, England Posts: 11,963	If your bumper is sagging there then cable tie it or fit the bumper bracket as others have said - not a mensa puzzle How you think any fibreglass kit is going to fit unless it's reinforced or mega gay and thick?

11-07-2008, 11:45	#19 (permalink)
200shaun tail slider Join Date: Dec 2006 Location: wirral Posts: 128	Nice car mate. I was at the auction in liverpool docks when this was sold i had a look around it an it was in good nick when i saw it.

11-07-2008, 12:25	#20 (permalink)
xborninthefightx dorifto kingu! Join Date: May 2007 Location: Ashford, Middlesex Posts: 807	That looks total bad ass, when you bring it to a skid day. With the rear bumper, you think thats bad wait till you see what mine looks like Will see you tomorow at EDC matey