My 320ise - Drifting forum

Mad-Morley · 17-07-2008, 21:47

Right here she be

All i've done so far is welded up the exhaust as it didnt have one half stripped the car out and fitted a second hand rad.

The to do list:

Fit the welded diff
fit the lowerin springs
spray the car
finish off strippin it out
get hold of some powerflex eccentric front wishbone bushes as fitted to 328 Sports and 3.0 M3's

Thats it for now

Mad-Morley · 20-07-2008, 17:38

Just a small advance for me got my crash hat today 35 quid brand new

No more advances on the car unfortunately as the weather has been cack

but fingers crossed this week will be better

. Oh and thought of a colour scheme but i know i will get the piss taken but sod it in for a penny in for a pound and it will definately stand out in a crowd lol.

Mad-Morley · 23-07-2008, 23:22

good advance for me got the welded diff in last night wiv a bit of drama but got there in the end. next up is the shocks next week

Mike@TDSW · 24-07-2008, 00:20

Get powerflex eccentric bushes for 328 sport / M3 as they give more castor again over oem ones and iirc I bought them because they were cheaper.

Mad-Morley · 24-07-2008, 21:07

yeah thats what i'm gonna go for, all in time, just wanna get the car to its first day so i can feel wat i think needs doing.

What lump are you runnin?

Mike@TDSW · 25-07-2008, 01:42

Mines a 328 sport so had them anyway but needed new ones. Thats how I know they give more castor again even over the oem eccentric ones.

Mad-Morley · 26-07-2008, 22:04

couple more pics to add to the thread taken today. Front bumper is off at the min as its up and down ramps like a yo yo at min while i prep lol.

need to get them springs fitted

mitsi_matt · 27-07-2008, 22:19

lovin the steelys on the back proper ghetto tyte yo!

Mad-Morley · 12-08-2008, 20:58

couple more pics got the front lowered last nite jus the rear to do and she is done for now, till i find somethin else to play wiv on her lol

B4

After

camera phone is cack as it was gettin dark but ya get the jist lol

Mad-Morley · 30-08-2008, 22:26

Update. Car is almost finished only a few more bits to do now, so far i've fitted a 318 diff, lowerein springs all round, welded up exhaust and reffitted, stripped out nearly everythin that unscrews and that the car doesnt need anymore lol, adjusted handbrake for sharper response and removed the ratchet.

To do list is to fit a 325 throttle body, lighten the flywheel and try to get as much bhp out of it as possible.

few more pics.

When i first got the car

and now

Will get some more pics of the car soon once i'ved cleared the inside out of all the interior bits i no longer require lol

17-07-2008, 21:47	#1 (permalink)
Mad-Morley gripper Join Date: Jul 2008 Posts: 14	My 320ise Right here she be All i've done so far is welded up the exhaust as it didnt have one half stripped the car out and fitted a second hand rad. The to do list: Fit the welded diff fit the lowerin springs spray the car finish off strippin it out get hold of some powerflex eccentric front wishbone bushes as fitted to 328 Sports and 3.0 M3's Thats it for now

12-08-2008, 20:58	#9 (permalink)
Mad-Morley gripper Join Date: Jul 2008 Posts: 14	couple more pics got the front lowered last nite jus the rear to do and she is done for now, till i find somethin else to play wiv on her lol B4 After camera phone is cack as it was gettin dark but ya get the jist lol Last edited by Mad-Morley : 12-08-2008 at 21:26.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

20-07-2008, 17:38	#2 (permalink)
Mad-Morley gripper Join Date: Jul 2008 Posts: 14	Just a small advance for me got my crash hat today 35 quid brand new No more advances on the car unfortunately as the weather has been cack but fingers crossed this week will be better . Oh and thought of a colour scheme but i know i will get the piss taken but sod it in for a penny in for a pound and it will definately stand out in a crowd lol.

23-07-2008, 23:22	#3 (permalink)
Mad-Morley gripper Join Date: Jul 2008 Posts: 14	good advance for me got the welded diff in last night wiv a bit of drama but got there in the end. next up is the shocks next week

24-07-2008, 00:20	#4 (permalink)
Mike@TDSW dorifto kingu! Join Date: Feb 2006 Location: Somerset Posts: 3,409	Get powerflex eccentric bushes for 328 sport / M3 as they give more castor again over oem ones and iirc I bought them because they were cheaper.

24-07-2008, 21:07	#5 (permalink)
Mad-Morley gripper Join Date: Jul 2008 Posts: 14	yeah thats what i'm gonna go for, all in time, just wanna get the car to its first day so i can feel wat i think needs doing. What lump are you runnin?

25-07-2008, 01:42	#6 (permalink)
Mike@TDSW dorifto kingu! Join Date: Feb 2006 Location: Somerset Posts: 3,409	Mines a 328 sport so had them anyway but needed new ones. Thats how I know they give more castor again even over the oem eccentric ones.

26-07-2008, 22:04	#7 (permalink)
Mad-Morley gripper Join Date: Jul 2008 Posts: 14	couple more pics to add to the thread taken today. Front bumper is off at the min as its up and down ramps like a yo yo at min while i prep lol. need to get them springs fitted

27-07-2008, 22:19	#8 (permalink)
mitsi_matt touge runner Join Date: Dec 2005 Posts: 183	lovin the steelys on the back proper ghetto tyte yo!

30-08-2008, 22:26	#10 (permalink)
Mad-Morley gripper Join Date: Jul 2008 Posts: 14	Update. Car is almost finished only a few more bits to do now, so far i've fitted a 318 diff, lowerein springs all round, welded up exhaust and reffitted, stripped out nearly everythin that unscrews and that the car doesnt need anymore lol, adjusted handbrake for sharper response and removed the ratchet. To do list is to fit a 325 throttle body, lighten the flywheel and try to get as much bhp out of it as possible. few more pics. When i first got the car and now Will get some more pics of the car soon once i'ved cleared the inside out of all the interior bits i no longer require lol