MCNSPORT.com SuperTune SR86 Corolla - Drifting forum

Peden · 28-08-2008, 19:18

Yet another one guys....

as per usual this one is getting the full works.. stripped down, sandblasted, seam welded, SR20'ed, MCNSPORT caging, MCNSPORT BLUE painted with underbody parts painted MCNSPORT GREEN, WORK wheel'ed etc etc

We are also working on a few custom jobs for this model - As we manufactor fiberglass aswell as carbon fibre, we are thinking of giving this one a carbon roof, dash, firewall, spare wheelwell cover and a few other bits and pieces :P

Anyway back to it, this is what we have done so fare..

Chassis on spit after seamwelding, MCNSPORT AE86 cage, wheel well tubbing, tunnel modification, chassis lightening (extreme lightening) and finally sandblasted:

Chassis just after it being sprayed custom MCNSPORT BLUE:

MCNSPORT.com

Peden · 28-08-2008, 19:18

Here we have fitted a complete Nissan S14 subframe to the rear and painted it MCNSPORT GREEN, we have also fitted new PowerFlex bushes:

Here we have the new fuel cell fitted+new fuel pump, with nice and clean braded hoses, pedals-gear lever-steering col-brake and clutch mater cyl refurbished and re-fitted: (EXCUSE THE DUST!!)

We also fitted a vertical hyd e-brake and turned the piston upside down so as to completely hide the pipes, ones seat is installed - NICE!

Here you see the hyd e-brake nearly fitted:

Here we have the newrear coilovers fitted, along with most of the suspension arms (Everything is being changed/modified) - Naturally the discs will be changed along with new pads, however this is only a small/quick job and will be done when nessesary:

Here we have closer pics of the MCNSPORT engine mounts and MCNSPORT Gearbox mount:

MCNSPORT.com

Peden · 28-08-2008, 19:19

Here we have fitted one of our Meisters to measure for new WORK wheels for this car, we also prefitted the Origin wings going onto the car:

MCNSPORT.com

Tang_01 · 28-08-2008, 20:11

very very nice, cant wait to see more.

Ts@n@k@s_Ae86 · 29-08-2008, 01:31

Me too!! Great job as usually!

Nilus · 29-08-2008, 01:43

beauty

George NeTv09 · 29-08-2008, 02:00

Awesome!!!!!

Baba · 29-08-2008, 09:09

Nicely done. Look forward to more pics.

Xaerobbo · 29-08-2008, 11:18

Awesome, just awesome.

xborninthefightx · 29-08-2008, 12:50

That looks ace mate. I looooovvvveee those wheels.

Stavros · 29-08-2008, 13:10

Awesome, love the S14 rear end conversion

mazdachris · 29-08-2008, 13:29

You guys just get better and better at this!

sr20d1 · 29-08-2008, 17:33

cool build..!!what kinda power are you hoping to get out of it

looks nice and light too

dan-86 · 29-08-2008, 18:51

nice work

cant wait 2 see the car in action!

Jimthejunior · 29-08-2008, 19:20

AWESOME

Keep this stuff coming

sPunky · 29-08-2008, 20:26

I am shocked! :O keep it up...

by the way - sick wheels!

Peden · 13-10-2008, 15:52

Hi there folks,

With Darren and myself being on the road as much a we have this year, I have not been so good at posting the pics as work progresses - SO.. here's some of the work we have done to this project since last..

We have the rear completely done now, with every part replaced and dialed in - This AE86 look 100% new, because it is - and it's is seriously going to turn heads upon completion.. Rear suspension has been adjusted and fitted probably, brake lines done, new discs added and the new calipers and pads are to be added shortly..

We also have the custom rad done now and it's ready to be fitted, once we take delivery of the custom front mounted intercooler - Which will be v-mounted like on the MCNSPORT.com SR86 Corolla - Once this arrives, we will get it fitted and fully functional.

/Peden
MCNSPORT.com

Paddy · 13-10-2008, 16:33

Very, very cool dude

**Mitch** · 13-10-2008, 17:47

Tidy work chaps

Hoan-kan · 13-10-2008, 18:03

This is shaping up to look absolutely sick. I love the colors. THe Meisters look awesome! Nice wings, too.

So an S14 subby will mate right up to an AE86? Or does it need some convincing?

28-08-2008, 19:18	#1 (permalink)
Peden mcnsport.com Join Date: Jul 2005 Location: Cork, Ireland Posts: 350	MCNSPORT.com SuperTune SR86 Corolla Yet another one guys.... as per usual this one is getting the full works.. stripped down, sandblasted, seam welded, SR20'ed, MCNSPORT caging, MCNSPORT BLUE painted with underbody parts painted MCNSPORT GREEN, WORK wheel'ed etc etc We are also working on a few custom jobs for this model - As we manufactor fiberglass aswell as carbon fibre, we are thinking of giving this one a carbon roof, dash, firewall, spare wheelwell cover and a few other bits and pieces :P Anyway back to it, this is what we have done so fare.. Chassis on spit after seamwelding, MCNSPORT AE86 cage, wheel well tubbing, tunnel modification, chassis lightening (extreme lightening) and finally sandblasted: Chassis just after it being sprayed custom MCNSPORT BLUE: MCNSPORT.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

28-08-2008, 19:18	#2 (permalink)
Peden mcnsport.com Join Date: Jul 2005 Location: Cork, Ireland Posts: 350	Here we have fitted a complete Nissan S14 subframe to the rear and painted it MCNSPORT GREEN, we have also fitted new PowerFlex bushes: Here we have the new fuel cell fitted+new fuel pump, with nice and clean braded hoses, pedals-gear lever-steering col-brake and clutch mater cyl refurbished and re-fitted: (EXCUSE THE DUST!!) We also fitted a vertical hyd e-brake and turned the piston upside down so as to completely hide the pipes, ones seat is installed - NICE! Here you see the hyd e-brake nearly fitted: Here we have the newrear coilovers fitted, along with most of the suspension arms (Everything is being changed/modified) - Naturally the discs will be changed along with new pads, however this is only a small/quick job and will be done when nessesary: Here we have closer pics of the MCNSPORT engine mounts and MCNSPORT Gearbox mount: MCNSPORT.com

28-08-2008, 19:19	#3 (permalink)
Peden mcnsport.com Join Date: Jul 2005 Location: Cork, Ireland Posts: 350	Here we have fitted one of our Meisters to measure for new WORK wheels for this car, we also prefitted the Origin wings going onto the car: MCNSPORT.com

28-08-2008, 20:11	#4 (permalink)
Tang_01 gripper Join Date: Sep 2005 Posts: 24	very very nice, cant wait to see more.

29-08-2008, 01:31	#5 (permalink)
Ts@n@k@s_Ae86 tail slider Join Date: Feb 2008 Posts: 84	Me too!! Great job as usually!

29-08-2008, 01:43	#6 (permalink)
Nilus doughnutter Join Date: Apr 2008 Location: Russia - Vladivostok Posts: 46	beauty

29-08-2008, 02:00	#7 (permalink)
George NeTv09 tail slider Join Date: Apr 2008 Location: Kardamili, Greece Posts: 92	Awesome!!!!!

29-08-2008, 09:09	#8 (permalink)
Baba A Super Slider Join Date: Jan 2005 Location: East London Posts: 5,403	Nicely done. Look forward to more pics.

29-08-2008, 11:18	#9 (permalink)
Xaerobbo tail slider Join Date: Apr 2006 Location: Near Portsmouth Posts: 103	Awesome, just awesome.

29-08-2008, 12:50	#10 (permalink)
xborninthefightx dorifto kingu! Join Date: May 2007 Location: Ashford, Middlesex Posts: 796	That looks ace mate. I looooovvvveee those wheels.

29-08-2008, 13:10	#11 (permalink)
Stavros DEYTUKURJURBS Join Date: May 2005 Location: Cheltenham, Gloucestershire Posts: 10,304	Awesome, love the S14 rear end conversion

29-08-2008, 13:29	#12 (permalink)
mazdachris Jam Hot Join Date: Oct 2005 Location: MK Posts: 2,206	You guys just get better and better at this!

29-08-2008, 17:33	#13 (permalink)
sr20d1 gripper Join Date: Jul 2008 Posts: 18	cool build..!!what kinda power are you hoping to get out of it looks nice and light too

29-08-2008, 18:51	#14 (permalink)
dan-86 gripper Join Date: Aug 2008 Location: Earl Shilton (Leics) Posts: 28	nice work cant wait 2 see the car in action!

29-08-2008, 19:20	#15 (permalink)
Jimthejunior Represent Join Date: Apr 2007 Posts: 1,940	AWESOME Keep this stuff coming

29-08-2008, 20:26	#16 (permalink)
sPunky gripper Join Date: Sep 2007 Posts: 19	I am shocked! :O keep it up... by the way - sick wheels!

13-10-2008, 15:52	#17 (permalink)
Peden mcnsport.com Join Date: Jul 2005 Location: Cork, Ireland Posts: 350	Hi there folks, With Darren and myself being on the road as much a we have this year, I have not been so good at posting the pics as work progresses - SO.. here's some of the work we have done to this project since last.. We have the rear completely done now, with every part replaced and dialed in - This AE86 look 100% new, because it is - and it's is seriously going to turn heads upon completion.. Rear suspension has been adjusted and fitted probably, brake lines done, new discs added and the new calipers and pads are to be added shortly.. We also have the custom rad done now and it's ready to be fitted, once we take delivery of the custom front mounted intercooler - Which will be v-mounted like on the MCNSPORT.com SR86 Corolla - Once this arrives, we will get it fitted and fully functional. /Peden MCNSPORT.com

13-10-2008, 16:33	#18 (permalink)
Paddy Drift Media Join Date: Oct 2004 Location: Waterford, Ireland Posts: 1,158	Very, very cool dude

13-10-2008, 17:47	#19 (permalink)
Mitch GRDriftGarage Join Date: Jul 2004 Location: Derby fulltime Posts: 10,668	Tidy work chaps

13-10-2008, 18:03	#20 (permalink)
Hoan-kan tail slider Join Date: Sep 2008 Location: NY, USA Posts: 79	This is shaping up to look absolutely sick. I love the colors. THe Meisters look awesome! Nice wings, too. So an S14 subby will mate right up to an AE86? Or does it need some convincing?