Passat Prodrft in Moscow - Drifting forum

short · 05-09-2008, 12:03

All greetings. I from Russia. b3club.ru
Has decided to show the project too.
A trade wind at me 3 years, much that has been made.

Projekt '06

Projekt '07

Tuning Show Motor Park in Moscow 2008

But this year has decided to make of it drift car..
Swap rb25det Skyline R33

Front: Nissan 300zx 4 piston brakes
Rear: Nissan 300zx 2 piston brakes

Transmission rb20det

Work goes at full speed. If it will be interesting to you, I can and spread all process further.
Why passat? Because such still nobody did and I love VW.

I think the interesting and unusual project will turn out

Quail · 05-09-2008, 12:43

Good luck! Thats going to be a major overhaul

Stavros · 05-09-2008, 12:44

Crazy! Be cool to see it done

Big-gareth · 05-09-2008, 13:01

Klass street sleeper

xborninthefightx · 05-09-2008, 13:05

cool, nice to see a VW made into a drift car. Good luck with it bud.

Nilus · 05-09-2008, 15:16

cool

another crazy russian project %)
good luck!

what you desided to do with front subframe? do a fully new one or changing old?

could you make a pic of front arms?

iwantans15!! · 05-09-2008, 15:46

Class project! Only thing though, is it just for the street or do you hope to enter it in drifting comps?

short · 08-09-2008, 06:16

Quote:

Originally Posted by Nilus

cool

another crazy russian project %)
good luck!

what you desided to do with front subframe? do a fully new one or changing old?

could you make a pic of front arms?

thanks
Front subframe is from Skyline too. With changes.

short · 08-09-2008, 06:17

Quote:

Originally Posted by iwantans15!!

Class project! Only thing though, is it just for the street or do you hope to enter it in drifting comps?

Thanks. I make car both for drift and for everyday riding. Everything will be reasonably.

Nick · 08-09-2008, 06:41

Quote:

Originally Posted by short

You have swedish hair!

Mr Bizzle · 08-09-2008, 12:42

Best advice i can give you is to put in an RB25 large casing gearbox right from the offset. If you don't you will be kicking yourself as soon as you break the 300hp/300ftlb mark.

RB20 gearboxes are the same as S13 CA18/S14 SR20 gearboxes etc. Effectivly, they are similar gearsets that the nissan bluebird had and they be built of cheese.

short · 09-09-2008, 06:46

gearbox rb20det maintains to 400hp
Coupling, flywheel and basket will be from rb25

Mr Bizzle · 09-09-2008, 10:21

Quote:

Originally Posted by short

gearbox rb20det maintains to 400hp

Yeah, on a track car if you drive it like a granny

In the real world, a small casing nissan box fails on a drift car at anything much over 300ftlbs if your driving it properly.

Trust us. We know. We have broken enough of them.

short · 10-09-2008, 07:00

Ok. It's rather difficult to find the transmission from RB25DET in Russia. That's why many people install exactly from rb20. I'll install this one initially. If break, I'll change it. Thanks.

Mr Bizzle · 10-09-2008, 12:49

Quote:

Originally Posted by short

Ok. It's rather difficult to find the transmission from RB25DET in Russia. That's why many people install exactly from rb20. I'll install this one initially. If break, I'll change it. Thanks.

Okay...

Just order one from Jap Performance Parts : Home. It'll be with you within 2 working days...

short · 15-10-2008, 11:49

passat has gone in service 2NR Works

15/10/08
Rear suspension has been established

zainey · 15-10-2008, 12:05

crazy dude......

great build though....defo follow this one!

ringer · 15-10-2008, 12:12

Worlds most over complex build ever.
Awesome!

sLoW DC2 · 15-10-2008, 18:33

gd to see somthin diffrent, good luck with the build

goose · 15-10-2008, 18:47

awesome!

was the engine mounted like RWD anyway like in the newer passats

05-09-2008, 12:03	#1 (permalink)
short gripper Join Date: Sep 2008 Location: Russia Posts: 7	Passat Prodrft in Moscow All greetings. I from Russia. b3club.ru Has decided to show the project too. A trade wind at me 3 years, much that has been made. Projekt '06 Projekt '07 Tuning Show Motor Park in Moscow 2008 But this year has decided to make of it drift car.. Swap rb25det Skyline R33 Front: Nissan 300zx 4 piston brakes Rear: Nissan 300zx 2 piston brakes Transmission rb20det Work goes at full speed. If it will be interesting to you, I can and spread all process further. Why passat? Because such still nobody did and I love VW. I think the interesting and unusual project will turn out Last edited by short : 05-09-2008 at 13:22.

10-09-2008, 07:00	#14 (permalink)
short gripper Join Date: Sep 2008 Location: Russia Posts: 7	Ok. It's rather difficult to find the transmission from RB25DET in Russia. That's why many people install exactly from rb20. I'll install this one initially. If break, I'll change it. Thanks. Last edited by short : 10-09-2008 at 07:52.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-09-2008, 12:43	#2 (permalink)
Quail Kouki Monster Join Date: Feb 2006 Location: Milton Keynes & Portsmouth Posts: 1,172	Good luck! Thats going to be a major overhaul

05-09-2008, 12:44	#3 (permalink)
Stavros DEYTUKURJURBS Join Date: May 2005 Location: Cheltenham, Gloucestershire Posts: 10,355	Crazy! Be cool to see it done

05-09-2008, 13:01	#4 (permalink)
Big-gareth dori wanabe :) Join Date: Oct 2007 Location: Carrickfergus N.I. Posts: 369	Klass street sleeper

05-09-2008, 13:05	#5 (permalink)
xborninthefightx dorifto kingu! Join Date: May 2007 Location: Ashford, Middlesex Posts: 807	cool, nice to see a VW made into a drift car. Good luck with it bud.

05-09-2008, 15:16	#6 (permalink)
Nilus doughnutter Join Date: Apr 2008 Location: Russia - Vladivostok Posts: 47	cool another crazy russian project %) good luck! what you desided to do with front subframe? do a fully new one or changing old? could you make a pic of front arms?

05-09-2008, 15:46	#7 (permalink)
iwantans15!! touge runner Join Date: Dec 2007 Posts: 240	Class project! Only thing though, is it just for the street or do you hope to enter it in drifting comps?

08-09-2008, 12:42	#11 (permalink)
Mr Bizzle Team DWYB Join Date: Jun 2005 Location: Beaconsfield, Bucks Posts: 4,228	Best advice i can give you is to put in an RB25 large casing gearbox right from the offset. If you don't you will be kicking yourself as soon as you break the 300hp/300ftlb mark. RB20 gearboxes are the same as S13 CA18/S14 SR20 gearboxes etc. Effectivly, they are similar gearsets that the nissan bluebird had and they be built of cheese.

09-09-2008, 06:46	#12 (permalink)
short gripper Join Date: Sep 2008 Location: Russia Posts: 7	gearbox rb20det maintains to 400hp Coupling, flywheel and basket will be from rb25

15-10-2008, 11:49	#16 (permalink)
short gripper Join Date: Sep 2008 Location: Russia Posts: 7	passat has gone in service 2NR Works 15/10/08 Rear suspension has been established

15-10-2008, 12:05	#17 (permalink)
zainey gripper Join Date: Mar 2007 Posts: 24	crazy dude...... great build though....defo follow this one!

15-10-2008, 12:12	#18 (permalink)
ringer Trackday Films Join Date: Oct 2005 Location: London - Nurburg Posts: 1,050	Worlds most over complex build ever. Awesome!

15-10-2008, 18:33	#19 (permalink)
sLoW DC2 gripper Join Date: Oct 2008 Posts: 14	gd to see somthin diffrent, good luck with the build

15-10-2008, 18:47	#20 (permalink)
goose touge runner Join Date: Oct 2007 Location: cardiff, southwales Posts: 231	awesome! was the engine mounted like RWD anyway like in the newer passats