S13 drift car - Drifting forum

fatdave · 05-08-2008, 21:16

Price drop £850

I am selling my s13 because the engine has dropped compression on cylinders 3 and 4 and is a bit low on 2. I had it compression test and the resaults were

1. 12 bar
2. 9.5 bar
3. 2.8 bar
4. 2 bar

I have been looking for a engine but lack of money and no where to really work on the car i am going to sell it.

interior

Sparco deep dish steering wheel
Sparco steering wheel spacer
Sparco corsa seat
Sparco harness
Tim Turbo boost gauge
Standard passager seat
The rest of the interior has been stripped out but can be supplied.
The sound deadening has been removed

Exterior

It has had a full repaint in Dark grey and the roof is black. I have been to four drift day since then so there is one or two scratches, but it is a good shell. I have some paint left over so you are welcome to have it ( i am shore you will hit a cone or two. )

Mods

coilovers on the back (unknown)
Standard shocks with lowering springs on the front
Driftworks four arm supension kit
Walbro fuel pump
FMIC
Stage 2 chip
Apexi air filter
Blitz dump valve
Welded diff
H&R 25mm wheel spacers
16 inch alloys on the car
6 x 16 inch drift alloys
4 x standard 15 inch alloys
lots of drift rubber if wanted

This was a excellant drift car until engine problem so if you have the facilities
to fix it you will have a good car.

Price £ 1000

My number is 07747661755 if you want to ask any questions

Pic

therealstig · 06-08-2008, 18:32

No way fella, can't believe your selling her

After all the hard work you've put in to her

It's a cracking shell, just need a new CA lump chucked in

fatdave · 07-08-2008, 18:37

bump!!!!!!!!!

tommahawk · 07-08-2008, 20:59

dude no dont do it rebuild it and all

fatdave · 08-08-2008, 17:44

Quote:

Originally Posted by tommahawk

dude no dont do it rebuild it and all

I have got to sell it like this now cause i am off to New Zealand after xmas

so cant afford to fix it

fatdave · 09-08-2008, 12:35

weekend bump.....

retrodan · 10-08-2008, 16:08

pm me ur cheapist cash price please dude!!! ta

cr33ch · 10-08-2008, 22:46

by any chance would you sell the rear spacers ? are the 25mm?

Please PM me cause i loose track of threads

fatdave · 13-08-2008, 17:44

bump ...........

LiGhTnInG · 13-08-2008, 18:20

Quote:

Originally Posted by retrodan

pm me ur cheapist cash price please dude!!! ta

If you buy this i'll give you a hand chucking another CA in

green-giant · 13-08-2008, 18:29

still available???
jamie

fatdave · 13-08-2008, 18:32

yeah ..................

green-giant · 13-08-2008, 18:40

right got to do a check with my money man

if all is welll il be PM you soon!!!! really interested,
cheers
jamie

fatdave · 13-08-2008, 18:42

Ok keep in touch.

Dave

fatdave · 16-08-2008, 13:25

Weekend bump.............

VrtasCZ · 16-08-2008, 19:52

PM send

fatdave · 19-08-2008, 20:33

Price drop £850

Baba · 20-08-2008, 13:17

Does the car drive ok? Do you know why the compression is low?

fatdave · 20-08-2008, 18:38

Car drives ok apart from lack of power do not no what is wrong with it the garage said valves or rings but it is not blowing oil out any where

VrtasCZ · 15-09-2008, 19:43

Still for sale?
It is possible some detailed photos?
Is a car without rust?

05-08-2008, 21:16	#1 (permalink)
fatdave tail slider Join Date: Nov 2007 Location: christchurch Posts: 104	S13 drift car Price drop £850 I am selling my s13 because the engine has dropped compression on cylinders 3 and 4 and is a bit low on 2. I had it compression test and the resaults were 1. 12 bar 2. 9.5 bar 3. 2.8 bar 4. 2 bar I have been looking for a engine but lack of money and no where to really work on the car i am going to sell it. interior Sparco deep dish steering wheel Sparco steering wheel spacer Sparco corsa seat Sparco harness Tim Turbo boost gauge Standard passager seat The rest of the interior has been stripped out but can be supplied. The sound deadening has been removed Exterior It has had a full repaint in Dark grey and the roof is black. I have been to four drift day since then so there is one or two scratches, but it is a good shell. I have some paint left over so you are welcome to have it ( i am shore you will hit a cone or two. ) Mods coilovers on the back (unknown) Standard shocks with lowering springs on the front Driftworks four arm supension kit Walbro fuel pump FMIC Stage 2 chip Apexi air filter Blitz dump valve Welded diff H&R 25mm wheel spacers 16 inch alloys on the car 6 x 16 inch drift alloys 4 x standard 15 inch alloys lots of drift rubber if wanted This was a excellant drift car until engine problem so if you have the facilities to fix it you will have a good car. Price £ 1000 My number is 07747661755 if you want to ask any questions Pic Last edited by fatdave : 19-08-2008 at 20:31.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-08-2008, 18:32	#2 (permalink)
therealstig touge runner Join Date: Aug 2007 Location: Bornmoot Posts: 184	No way fella, can't believe your selling her After all the hard work you've put in to her It's a cracking shell, just need a new CA lump chucked in

07-08-2008, 18:37	#3 (permalink)
fatdave tail slider Join Date: Nov 2007 Location: christchurch Posts: 104	bump!!!!!!!!!

07-08-2008, 20:59	#4 (permalink)
tommahawk spl dori master Join Date: Jun 2007 Location: swindon Posts: 485	dude no dont do it rebuild it and all

09-08-2008, 12:35	#6 (permalink)
fatdave tail slider Join Date: Nov 2007 Location: christchurch Posts: 104	weekend bump.....

10-08-2008, 16:08	#7 (permalink)
retrodan celebs in car Join Date: Nov 2006 Location: sittingbourne,kent Posts: 3,070	pm me ur cheapist cash price please dude!!! ta

10-08-2008, 22:46	#8 (permalink)
cr33ch tail slider Join Date: Mar 2008 Posts: 127	by any chance would you sell the rear spacers ? are the 25mm? Please PM me cause i loose track of threads

13-08-2008, 17:44	#9 (permalink)
fatdave tail slider Join Date: Nov 2007 Location: christchurch Posts: 104	bump ...........

13-08-2008, 18:29	#11 (permalink)
green-giant touge runner Join Date: Jan 2008 Location: Lancing, Near Brighton Posts: 226	still available??? jamie

13-08-2008, 18:32	#12 (permalink)
fatdave tail slider Join Date: Nov 2007 Location: christchurch Posts: 104	yeah ..................

13-08-2008, 18:40	#13 (permalink)
green-giant touge runner Join Date: Jan 2008 Location: Lancing, Near Brighton Posts: 226	right got to do a check with my money man if all is welll il be PM you soon!!!! really interested, cheers jamie

13-08-2008, 18:42	#14 (permalink)
fatdave tail slider Join Date: Nov 2007 Location: christchurch Posts: 104	Ok keep in touch. Dave

16-08-2008, 13:25	#15 (permalink)
fatdave tail slider Join Date: Nov 2007 Location: christchurch Posts: 104	Weekend bump.............

16-08-2008, 19:52	#16 (permalink)
VrtasCZ doughnutter Join Date: Mar 2008 Location: Kladno(Czech Republic) Posts: 60	PM send

19-08-2008, 20:33	#17 (permalink)
fatdave tail slider Join Date: Nov 2007 Location: christchurch Posts: 104	Price drop £850

20-08-2008, 13:17	#18 (permalink)
Baba A Super Slider Join Date: Jan 2005 Location: Essex Drifters Union Posts: 5,400	Does the car drive ok? Do you know why the compression is low?

20-08-2008, 18:38	#19 (permalink)
fatdave tail slider Join Date: Nov 2007 Location: christchurch Posts: 104	Car drives ok apart from lack of power do not no what is wrong with it the garage said valves or rings but it is not blowing oil out any where

15-09-2008, 19:43	#20 (permalink)
VrtasCZ doughnutter Join Date: Mar 2008 Location: Kladno(Czech Republic) Posts: 60	Still for sale? It is possible some detailed photos? Is a car without rust?