cheapy S13 with drifty bits or swap - Drifting forum

Hexham-Scotty · 15-08-2008, 15:12

UK 200sx CA18, good engine/turbo, box and diff, bought from Pete Barber ages ago.
No tax or mot, shell is rusty so would need welding for an mot, sills are ok just a few holes in front inner wings and rear wheel arch inner.
I would break it but dont have the time or space.

110,000 miles
Super spark coilpacks, new plugs
GTR fmic
High flow air filter
New alloy rad

5 stud conversion, Skyline rear, S14 front
Adjustable rear camber arms
Uprated front track control arms (better lock)
Coilovers
Comes with standard Skyline alloys NOT the white wheels on the front.
Sunroof
Rear spoiler

Aftermarket steering wheel.
Bride bucket seat
omp harness
Battery re-located in the boot

Has had a bash in the nsf wing
The clutch and flywheel are goosed but there is an uprated lightened flywheel and new paddle clutch to go with the car.
Hydraulic hand brake was nicked for another car so will need another put in or the brake line re-connected.

Obviously this is a trailer away job.

I want £600 cash or will swap for a solid rust free rolling shell either S13 or GTS32 2 door, dont need engine, box or diff.

pm or direct email is info@japanimportcar.com
Cheers Scotty

Hammond · 15-08-2008, 15:24

I want the FMIC and seat dude!!!

**Mitch** · 15-08-2008, 15:29

How bad is the shell? I have a really solid M Reg RS13 (dunno if you meant PS) rolling shell, so may be tempted.

Hexham-Scotty · 15-08-2008, 15:29

I have a brand new intercooler the same £150 ?

If I dont get any interest in the next couple of weeks I will knack it for parts (if I can summon up the energy)

Hexham-Scotty · 15-08-2008, 15:30

Hi Mitch
It does need a fair bit of welding but nothing to a man of your calliber.
RS13 ? Pics pls

**Mitch** · 15-08-2008, 15:30

RS13 as in UK 200SX

Hexham-Scotty · 15-08-2008, 15:32

Quote:

Originally Posted by Mitch

RS13 as in UK 200SX

ok, not realy up on my ps rs s bodys but yes could be what I am looking for, let me know matey.

Hexham-Scotty · 15-08-2008, 15:45

Just had a good look at the shell, not as bad as I thought, might even use this shell ?
Inner front wing holes and a hole at the rear of the passenger side sill/inner wheel arch (usual stuff I guess) I think it is a 90/91 shell.

Rhys_sx · 15-08-2008, 15:51

Swap u my daily drive corsa for it lol

Hexham-Scotty · 15-08-2008, 15:54

A what ? lol no taa

SaqsAE86 · 15-08-2008, 16:04

location?

Hexham-Scotty · 15-08-2008, 16:09

Hexham (funly enough) 20 miles west of Newcastle upon Tyne, NE46 1SZ

Andy_f · 15-08-2008, 21:10

Hmm, could you be tempted into selling the super-sparks Scotty?

Hexham-Scotty · 16-08-2008, 01:19

Quote:

Originally Posted by Andy_f

Hmm, could you be tempted into selling the super-sparks Scotty?

Can get a new set for £249 ?
(sponsored by super spark)

Tomm R · 17-08-2008, 15:54

damn why do you have to be so far away!

I would have had this if you was closer, ah well have a bump!

marcus23 · 18-08-2008, 11:05

if you do break it mate i'd be interested in a few parts from you !

Hexham-Scotty · 19-08-2008, 16:46

had loads of interest but no one has come up with the wonga.
People interested in swaps please send details and pictures as requested.
I will give it a week and if nothing has happend (work load permiting) will break it.
Pics to info@japanimportcar.com pls

astra_coupe · 19-08-2008, 17:10

would you consider selling the front wheels??

Hexham-Scotty · 19-08-2008, 17:25

Quote:

Originally Posted by astra_coupe

would you consider selling the front wheels??

Got a set of four, been drifted on for 2 years so had some knocks, one has had a crack on the inside welded.
Make me an offer

astra_coupe · 19-08-2008, 17:35

size, width and offsets please...

15-08-2008, 15:12	#1 (permalink)
Hexham-Scotty Skylinepart.cm Join Date: Nov 2006 Location: Up Norf Posts: 1,036	cheapy S13 with drifty bits or swap UK 200sx CA18, good engine/turbo, box and diff, bought from Pete Barber ages ago. No tax or mot, shell is rusty so would need welding for an mot, sills are ok just a few holes in front inner wings and rear wheel arch inner. I would break it but dont have the time or space. 110,000 miles Super spark coilpacks, new plugs GTR fmic High flow air filter New alloy rad 5 stud conversion, Skyline rear, S14 front Adjustable rear camber arms Uprated front track control arms (better lock) Coilovers Comes with standard Skyline alloys NOT the white wheels on the front. Sunroof Rear spoiler Aftermarket steering wheel. Bride bucket seat omp harness Battery re-located in the boot Has had a bash in the nsf wing The clutch and flywheel are goosed but there is an uprated lightened flywheel and new paddle clutch to go with the car. Hydraulic hand brake was nicked for another car so will need another put in or the brake line re-connected. Obviously this is a trailer away job. I want £600 cash or will swap for a solid rust free rolling shell either S13 or GTS32 2 door, dont need engine, box or diff. pm or direct email is info@japanimportcar.com Cheers Scotty Last edited by Hexham-Scotty : 15-08-2008 at 15:14.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

15-08-2008, 15:24	#2 (permalink)
Hammond oh, snap! Join Date: Jan 2005 Location: Canterbury Posts: 4,961	I want the FMIC and seat dude!!!

15-08-2008, 15:29	#3 (permalink)
Mitch GRDriftGarage Join Date: Jul 2004 Location: Derby fulltime Posts: 10,647	How bad is the shell? I have a really solid M Reg RS13 (dunno if you meant PS) rolling shell, so may be tempted.

15-08-2008, 15:29	#4 (permalink)
Hexham-Scotty Skylinepart.cm Join Date: Nov 2006 Location: Up Norf Posts: 1,036	I have a brand new intercooler the same £150 ? If I dont get any interest in the next couple of weeks I will knack it for parts (if I can summon up the energy)

15-08-2008, 15:30	#5 (permalink)
Hexham-Scotty Skylinepart.cm Join Date: Nov 2006 Location: Up Norf Posts: 1,036	Hi Mitch It does need a fair bit of welding but nothing to a man of your calliber. RS13 ? Pics pls

15-08-2008, 15:30	#6 (permalink)
Mitch GRDriftGarage Join Date: Jul 2004 Location: Derby fulltime Posts: 10,647	RS13 as in UK 200SX

15-08-2008, 15:45	#8 (permalink)
Hexham-Scotty Skylinepart.cm Join Date: Nov 2006 Location: Up Norf Posts: 1,036	Just had a good look at the shell, not as bad as I thought, might even use this shell ? Inner front wing holes and a hole at the rear of the passenger side sill/inner wheel arch (usual stuff I guess) I think it is a 90/91 shell.

15-08-2008, 15:51	#9 (permalink)
Rhys_sx spl dori master Join Date: Nov 2007 Posts: 290	Swap u my daily drive corsa for it lol

15-08-2008, 15:54	#10 (permalink)
Hexham-Scotty Skylinepart.cm Join Date: Nov 2006 Location: Up Norf Posts: 1,036	A what ? lol no taa

15-08-2008, 16:04	#11 (permalink)
SaqsAE86 touge runner Join Date: Jun 2008 Location: Slough Posts: 178	location?

15-08-2008, 16:09	#12 (permalink)
Hexham-Scotty Skylinepart.cm Join Date: Nov 2006 Location: Up Norf Posts: 1,036	Hexham (funly enough) 20 miles west of Newcastle upon Tyne, NE46 1SZ

15-08-2008, 21:10	#13 (permalink)
Andy_f I <3 BDC! Join Date: Sep 2005 Location: Redditch/Birmingham Posts: 2,022	Hmm, could you be tempted into selling the super-sparks Scotty?

17-08-2008, 15:54	#15 (permalink)
Tomm R The Poggster Join Date: Sep 2007 Location: Rainham kent Posts: 643	damn why do you have to be so far away! I would have had this if you was closer, ah well have a bump!

18-08-2008, 11:05	#16 (permalink)
marcus23 tail slider Join Date: Dec 2007 Location: glasgow Posts: 143	if you do break it mate i'd be interested in a few parts from you !

19-08-2008, 16:46	#17 (permalink)
Hexham-Scotty Skylinepart.cm Join Date: Nov 2006 Location: Up Norf Posts: 1,036	had loads of interest but no one has come up with the wonga. People interested in swaps please send details and pictures as requested. I will give it a week and if nothing has happend (work load permiting) will break it. Pics to info@japanimportcar.com pls

19-08-2008, 17:10	#18 (permalink)
astra_coupe dorifto kingu! Join Date: Sep 2006 Location: birmingham Posts: 1,170	would you consider selling the front wheels??

19-08-2008, 17:35	#20 (permalink)
astra_coupe dorifto kingu! Join Date: Sep 2006 Location: birmingham Posts: 1,170	size, width and offsets please...