Results 1 to 3 of 3
  1. #1
    dorifto kingu!
    Join Date
    Feb 2011
    Italy Reggio Emilia

    Luke Lonberger’s Chevrolet C6 Corvette Drift car [BUY THIS]

    Here’s another chance to own a professional drift car. With plans for a new ride for the 2013 drift season Luke Lonberger has put his 2005 Chevrolet C6 Corvette up for sale. Not at all one of the cheaper Formula Drift builds available on the market but by far one of the most unique and cool builds available.

    2005 Chevrolet C6 Corvette
    Tires –Hankook R-S3
    Mast Motorsports 416ci, 622 WHP 580 wtq
    4 stage ARE dry sump pump,
    ARE Dry sump tank,
    ARE low profile Dry sump pump,
    ARE filter block,
    Push lock lines,
    ATI harmonic dampener,
    Callies Dragon slayer crank,
    Clevite 77 bearings, ATL Billet main caps,
    Arp main studs, Arp head studs,
    Arp rocker bolts, Mast black label Cylinder heads,
    Titanium valves,
    Titanium retainers,
    Mast Valve springs,
    Mast rocker arms,
    Mast rocker arm girdle,
    Prototype Titanium push rods,
    “Prototype” hydraulic lifters,
    LG Motorsports G6XRR Camshaft
    Billet Mast Cam sprocket
    Mast Timing Chain
    Blu808 billet engine mounts (solid)
    FAST LXR Intake manifold
    Aeromotive Fuel rails (billet)
    Ls9 59Lb injectors
    GM Map Sensor
    GM AIT Sensor
    GM LS9 throttle body
    GM LS9 Coils
    Mast Motorsports Spark plug wires with heat shields
    NGK Iridium spark plugs
    LG Carbon fiber intake system with K&N filter
    LG Motorsports Stainless Super Pro Long Tube headers
    LG Motorsports stainless X pipe
    Blu808 rear blast pipes
    Exedy GT04XD Twin Disc clutch
    GMR Torque tube bearings
    DSS Aluminum driveshaft
    RPM Transmissions Level 5 TR6060 6 speed with DSS Hardened main shaft, polished gears, added gear sprayer, internal pump, and cry treated gear set
    RPM Transmissions Level 5 ZR1 Corvette Differential with added clutch plate and cone spring on each side.
    RPM Transmissions 3.91 Cryo treated ring and pinion
    DSS Hardened output shafts
    DSS Level 5 1200hp axles with porsche flange adapters
    SKF wheel bearings
    LG Motorsports ALMS active piston coilovers,
    Hyperco Springs,
    Blu808 steering angle system,
    Blu808 roll cage.
    LG Motorsports Billet CNC uprights
    New GMR Control arms and bushings
    Chassis -
    Blu808 tig welded 4130 Cromoly welded by AWS certified welder and approved for Formula D for 2013
    Chassis was completely stripped during the build process and was painted with the body removed
    Blu808 Steering column
    C6 Z06 6 piston front 4 piston rear
    Hawk HPS brake pads
    Drilled rotors
    Stainless lines
    K sport hand brake
    Wilwood proportioning valves
    Power brake booster (GM)
    Forgeline Ga3r with titanium hardware 18″ 9 included. 3 fronts, 6 rears. 2 need outer barrel replaced (easy)
    LG Motorsports ALMS Carbon fiber wing with Billet Airfoil mounts,
    Extreme Dimensions ZR1 front fenders
    Extreme Dimensions ZR1 rear fenders
    LG Motorsports World Challenge hood
    Extreme Dimensions ZR1 front bumper
    LG Motorsports Carbon ZR1 front splitter
    LG Motorsports Carbon side skirts
    Tow hooks
    Sparco EVO seats
    Sparco Harnesses
    Sparco Steering wheel
    Woodward quick release
    Aim digital data logging dash display
    Jordan innovations mil spec chassis harness
    Jordan innovations switch panel
    Mast Motorsports Bosch adaptive learning ECU system with mil spec harness
    Aim digital data logging dash display
    Fuel system-
    Aeromotive Stealth fuel pump system with A-1000 pump
    Stainless lines throughout
    Aeromotive billet fuel filter
    Aluminum hardlines
    XRP aluminum A/N fittings
    Aeromotive billet fuel regulator
    Aeromotive Y fittings
    Aeromotive Billet fuel rails
    Cost of just the parts alone is about $90,000
    Labor was about 3000 hours not including development
    Cost of car before building was $18,000
    Asking $120k OBO
    Car has a clean California Title
    Luke Lonberger’s Chevrolet C6 Corvette Drift car [BUY THIS] : Breaking Drift News

    What do you think of this one?
    Sig removed: please read rules regarding signature sizes.

  2. #2
    Join Date
    May 2005
    B.C Canada

    Build and Destroy

  3. #3
    Paz is offline

    Join Date
    Aug 2001
    Dudes a mouth breather..
    Hey! Fack off.. Bitch!

    Drift Tutor
    Jims Factory Online Shop


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts