JDM Motorsport!!! :) - Drifting forum

willg180 · 01-05-2008, 22:32

As some will know I picked up a new a fews weeks ago, and like any other it has been good fun getting to know it

. As with any second hand car there is always going to be a couple of little teathing issues. After a few fun miles and a fair bit of dicking around on the works car park, I noticed a bit of crackage to my manifold. All though I'm not that bad with the old spanners, when it comes to dropping turbo's off I would rather get a profesional to sort it out, with the aid of the correct tools, knowledge, and time to check everything else is sweet.

I dont know about anyone else but whenever it comes down to finding somewhere to look after your drift car its always a major worry and hassle. All the places that are motorsport driven are never that interested and cost an absolute fortune. We've nearly all got a local spanner man who's cheap and cheerful but there drifting knowledge can often be slighty lacking, not to mention half your aero being left on the ramp and your new suede steering wheel being coated in eau de gearbox.lol. All the mint drifty garages are always close to other lucky sods, and never on your door step.

Well I am now one of those lucky buggers

A drift orientated garage on my door step

JDM Motorsport, has just opened up on the Ikon trading estate, near Kidderminster (west Midlands). Absuletly chuffed with the work they did on my car, its now spot on thanks to a few other little bits and pieces getting sorted, which went above and beyond what I've experienced with everwhere else I've taken my drift cars over the last 6 or 7 years.

Richard Clark (superclarkey on here) did all the work, and to say he knows his stuff is a massive understatment

Cant believe we hadn't met before seeing as we've both been involved in drifting for so long, but it was good fun talking crap about the good (/bad

) old days.

Couldn't be happier with the time and effort they put into my car (thanks again btw

), I was wondering if anyone else on here has been there yet?

ultramotorz · 01-05-2008, 23:39

I echo your statements, my car is now with JDM motorsport having a few minor operations carried out to get it the way it should have been. I found out about JDM motorsport whilst superclarky was helping out get the car running at Mondello 2 weeks ago now the car has made the trip from Northern Ireland all the way to Kidderminster as i felt that he was the only one who could set the car up the way the driver Mark Luney and myself wanted.
Cant wait to see the finished car on track at Prodrift Teeside in 3 weeks.

superclarkey · 02-05-2008, 09:45

thank you guys, is a plesure to work on such motors

spin-king · 02-05-2008, 11:04

Is good to read that once the money is saved my project will be going to sombody who knows what they are doing looking forward to jdm motorsport sorting my engine swap out for me.

Just the question is rb25 or sr20 in my none engined uk s13????

willg180 · 02-05-2008, 14:03

OOOoooo the Supra is there, I'll be poping in for a good look at that some time.

Quote:

Originally Posted by spin-king

Is good to read that once the money is saved my project will be going to sombody who knows what they are doing looking forward to jdm motorsport sorting my engine swap out for me.

Just the question is rb25 or sr20 in my none engined uk s13????

It'll worth the drive down Ant, really nice set up with the knowledge to boot. Cant wait to get some more monies saved myself to get my car some extra pimpage down there

K10RFT · 02-05-2008, 19:36

clarky san is a good spanner monkey an cheap

K

nootty · 02-05-2008, 23:55

Thank you will, a plesure to have you car down

Nelo · 03-05-2008, 12:34

Good to hear Clarkeys doing well

superclarkey · 03-05-2008, 17:07

Thanx dude

cefiro_drifta · 03-05-2008, 17:09

clarkey your PM box

superclarkey · 03-05-2008, 17:22

email me, its easyer

superclarkey@hotmail.com

That's never full lol.

cefiro_drifta · 03-05-2008, 18:12

well just gonna ask where my safc loom is and if you got any r32 bits u want to swap for it

superclarkey · 03-05-2008, 18:14

lol, the loom is still on the engine, i keep meaning to remove it but i'm so busy

lol

you need to call me in the day and i'll do it while your on the phone

cefiro_drifta · 03-05-2008, 18:16

dude when i call u it says its off .... ure poo but u spanner good so i'll let u off

also a cage for an r32 ...

superclarkey · 03-05-2008, 18:18

Its because i'm with Orange and the phone is crap, got no signal over at work

We will have the direct land line up and running soon

clarkey.

Stavros · 03-05-2008, 18:19

Cool man, you got a place, and pretty near me too

Ill see if I can sling some work your way, yourr one of the few people I properly trust to know what they doing and do a good job

Will_DW · 03-05-2008, 18:20

Quote:

Originally Posted by Stavros

Cool man, you got a place, and pretty near me too

Ill see if I can sling some work your way, yourr one of the few people I properly trust to know what they doing and do a good job

Ill second that.

Clarkey is awesome at what he does.

Dori Mat · 03-05-2008, 18:21

Quote:

Originally Posted by cefiro_drifta

if you got any r32 bits u want to swap for it

buy my RB25

superclarkey · 03-05-2008, 18:21

Quote:

Originally Posted by Stavros

Cool man, you got a place, and pretty near me too

Ill see if I can sling some work your way, yourr one of the few people I properly trust to know what they doing and do a good job

thanx

rallyman1978 · 04-05-2008, 12:04

Which one's the Ikon ind est?

01-05-2008, 22:32	#1 (permalink)
willg180 spl dori master Join Date: Aug 2004 Location: Droitwich/Stourbridge Posts: 339	JDM Motorsport!!! :) As some will know I picked up a new a fews weeks ago, and like any other it has been good fun getting to know it. As with any second hand car there is always going to be a couple of little teathing issues. After a few fun miles and a fair bit of dicking around on the works car park, I noticed a bit of crackage to my manifold. All though I'm not that bad with the old spanners, when it comes to dropping turbo's off I would rather get a profesional to sort it out, with the aid of the correct tools, knowledge, and time to check everything else is sweet. I dont know about anyone else but whenever it comes down to finding somewhere to look after your drift car its always a major worry and hassle. All the places that are motorsport driven are never that interested and cost an absolute fortune. We've nearly all got a local spanner man who's cheap and cheerful but there drifting knowledge can often be slighty lacking, not to mention half your aero being left on the ramp and your new suede steering wheel being coated in eau de gearbox.lol. All the mint drifty garages are always close to other lucky sods, and never on your door step. Well I am now one of those lucky buggers A drift orientated garage on my door step JDM Motorsport, has just opened up on the Ikon trading estate, near Kidderminster (west Midlands). Absuletly chuffed with the work they did on my car, its now spot on thanks to a few other little bits and pieces getting sorted, which went above and beyond what I've experienced with everwhere else I've taken my drift cars over the last 6 or 7 years. Richard Clark (superclarkey on here) did all the work, and to say he knows his stuff is a massive understatment Cant believe we hadn't met before seeing as we've both been involved in drifting for so long, but it was good fun talking crap about the good (/bad) old days. Couldn't be happier with the time and effort they put into my car (thanks again btw), I was wondering if anyone else on here has been there yet?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-05-2008, 23:39	#2 (permalink)
ultramotorz touge runner Join Date: Sep 2006 Location: Northern Ireland Posts: 155	I echo your statements, my car is now with JDM motorsport having a few minor operations carried out to get it the way it should have been. I found out about JDM motorsport whilst superclarky was helping out get the car running at Mondello 2 weeks ago now the car has made the trip from Northern Ireland all the way to Kidderminster as i felt that he was the only one who could set the car up the way the driver Mark Luney and myself wanted. Cant wait to see the finished car on track at Prodrift Teeside in 3 weeks.

02-05-2008, 09:45	#3 (permalink)
superclarkey Mood=Badical! Join Date: Aug 2004 Location: Birmingham-spec Posts: 8,767	thank you guys, is a plesure to work on such motors

02-05-2008, 11:04	#4 (permalink)
spin-king Going backwards Join Date: May 2006 Location: wirral (merseyside) Posts: 1,425	Is good to read that once the money is saved my project will be going to sombody who knows what they are doing looking forward to jdm motorsport sorting my engine swap out for me. Just the question is rb25 or sr20 in my none engined uk s13????

02-05-2008, 19:36	#6 (permalink)
K10RFT spl dori master Join Date: Sep 2006 Location: fife Posts: 350	clarky san is a good spanner monkey an cheap K

02-05-2008, 23:55	#7 (permalink)
nootty touge runner Join Date: Aug 2007 Location: West Midlands Posts: 231	Thank you will, a plesure to have you car down

03-05-2008, 12:34	#8 (permalink)
Nelo Resident Alco Join Date: Dec 2004 Location: Alcoville, Ireland Posts: 1,850	Good to hear Clarkeys doing well

03-05-2008, 17:07	#9 (permalink)
superclarkey Mood=Badical! Join Date: Aug 2004 Location: Birmingham-spec Posts: 8,767	Thanx dude

03-05-2008, 17:09	#10 (permalink)
cefiro_drifta mad pointing munkey Join Date: Oct 2005 Location: surrey Posts: 11,574	clarkey your PM box

03-05-2008, 17:22	#11 (permalink)
superclarkey Mood=Badical! Join Date: Aug 2004 Location: Birmingham-spec Posts: 8,767	email me, its easyer superclarkey@hotmail.com That's never full lol.

03-05-2008, 18:12	#12 (permalink)
cefiro_drifta mad pointing munkey Join Date: Oct 2005 Location: surrey Posts: 11,574	well just gonna ask where my safc loom is and if you got any r32 bits u want to swap for it

03-05-2008, 18:14	#13 (permalink)
superclarkey Mood=Badical! Join Date: Aug 2004 Location: Birmingham-spec Posts: 8,767	lol, the loom is still on the engine, i keep meaning to remove it but i'm so busy lol you need to call me in the day and i'll do it while your on the phone

03-05-2008, 18:16	#14 (permalink)
cefiro_drifta mad pointing munkey Join Date: Oct 2005 Location: surrey Posts: 11,574	dude when i call u it says its off .... ure poo but u spanner good so i'll let u off also a cage for an r32 ...

03-05-2008, 18:18	#15 (permalink)
superclarkey Mood=Badical! Join Date: Aug 2004 Location: Birmingham-spec Posts: 8,767	Its because i'm with Orange and the phone is crap, got no signal over at work We will have the direct land line up and running soon clarkey.

03-05-2008, 18:19	#16 (permalink)
Stavros DEYTUKURJURBS Join Date: May 2005 Location: Cheltenham, Gloucestershire Posts: 9,550	Cool man, you got a place, and pretty near me too Ill see if I can sling some work your way, yourr one of the few people I properly trust to know what they doing and do a good job

04-05-2008, 12:04	#20 (permalink)
rallyman1978 hachiroku Join Date: Jan 2006 Location: Worcester Posts: 953	Which one's the Ikon ind est?