DW Piro Antibumpsteer rod ends - Drifting forum

**Phil** · 24-03-2006, 18:18

Finally we have a due date for our batch of Tein tie rods to compliment our DW Piro anti bump steer rod ends!!!!!

Tein rods are due with us mid next week so pre-order now to get them while stocks last

Driftworks Piro Anti bump steer tie rod ends

**Phil** · 28-03-2006, 10:28

Tein tie rods now in stock again

Rads_s13 · 29-03-2006, 09:18

Phil can you put a set of rods and ends to one side for me as I want them but can't pu them on the credit card until next week.

Cheers Richard

**Phil** · 29-03-2006, 10:23

Certainly can mate, we actually have another batch of Tein tie rods arriving at the end of the week, and 200 sets of DW Piro tie rod ends, so you should be fine

**Mitch** · 29-03-2006, 11:10

200???? Farkinell

**Phil** · 29-03-2006, 11:39

Tell me about it

, thats serious serious grandage tied up there!! but it was the only way we could get them at the quality we wanted and cheap retail that you guys want

..

Rads_s13 · 29-03-2006, 13:24

Coolio cheers Phil

doz · 20-04-2008, 10:54

Big bump!

Do you still stock Piro TRE's?

**Phil** · 20-04-2008, 14:56

No dude. we stopped doing them a long time ago.

Brunosr13 · 20-04-2008, 15:02

Quote:

Originally Posted by Phil

No dude. we stopped doing them a long time ago.

Why???

doz · 20-04-2008, 17:04

Out of curiosity is there any reason why you stopped stocking them?

**Phil** · 20-04-2008, 18:21

2 reasons, there's so many different lengths of tie rod end, we ended up having to manufacture 4 differnent ends at great expense, and also because people not using lower arm's with bump stops, used the end of the tie rod end (hitting the lower arm). This broke a couple of shafts in the tie rod end, and we decided it wasn't worth selling them any more.. Our's were actually superb compaired to the toss that every other company apart from Ikeya Formula sell. the cheap ones bind the bearings even on standard lock. The failiure rate is generally so bad that we won't sell them at all, and for most peoples purposes the Tien rod ends are more than adequate.

Brunosr13 · 20-04-2008, 19:36

Ok, sorry for the question and thanks for the clean answer

Rads_s13 · 21-04-2008, 14:11

I'm still running a pair of these 2 years on

**Phil** · 21-04-2008, 14:14

As is my S14, and our R32 I think. I've only ever seen two failiures, and one of those is Bonbon, so that didn't really suprise me

.

Rads_s13 · 21-04-2008, 14:18

lol good point, the only thing that I couldn't do was use the tien rack spacers as I couldn't pull the rod ends in far enough to track it up, and over time the boots have worn through slightly where they touch the lock stops on the arms. but with the roads in bucks their a god send as if I didn't have them the sterring would jump about

24-03-2006, 18:18	#1 (permalink)
Phil 7JZGTE Join Date: Jul 2004 Location: Birmingham Posts: 6,895	DW Piro Antibumpsteer rod ends Finally we have a due date for our batch of Tein tie rods to compliment our DW Piro anti bump steer rod ends!!!!! Tein rods are due with us mid next week so pre-order now to get them while stocks last Driftworks Piro Anti bump steer tie rod ends

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

28-03-2006, 10:28	#2 (permalink)
Phil 7JZGTE Join Date: Jul 2004 Location: Birmingham Posts: 6,895	Tein tie rods now in stock again

29-03-2006, 09:18	#3 (permalink)
Rads_s13 Suspension Mangler Join Date: Aug 2004 Location: Bucks Posts: 1,106	Phil can you put a set of rods and ends to one side for me as I want them but can't pu them on the credit card until next week. Cheers Richard

29-03-2006, 10:23	#4 (permalink)
Phil 7JZGTE Join Date: Jul 2004 Location: Birmingham Posts: 6,895	Certainly can mate, we actually have another batch of Tein tie rods arriving at the end of the week, and 200 sets of DW Piro tie rod ends, so you should be fine

29-03-2006, 11:10	#5 (permalink)
Mitch DriftGarage Join Date: Jul 2004 Location: Derby/Oxford Posts: 9,323	200???? Farkinell

29-03-2006, 11:39	#6 (permalink)
Phil 7JZGTE Join Date: Jul 2004 Location: Birmingham Posts: 6,895	Tell me about it , thats serious serious grandage tied up there!! but it was the only way we could get them at the quality we wanted and cheap retail that you guys want ..

29-03-2006, 13:24	#7 (permalink)
Rads_s13 Suspension Mangler Join Date: Aug 2004 Location: Bucks Posts: 1,106	Coolio cheers Phil

20-04-2008, 10:54	#8 (permalink)
doz animal!! Join Date: Apr 2007 Location: Bridgnorth Posts: 1,364	Big bump! Do you still stock Piro TRE's?

20-04-2008, 14:56	#9 (permalink)
Phil 7JZGTE Join Date: Jul 2004 Location: Birmingham Posts: 6,895	No dude. we stopped doing them a long time ago.

20-04-2008, 17:04	#11 (permalink)
doz animal!! Join Date: Apr 2007 Location: Bridgnorth Posts: 1,364	Out of curiosity is there any reason why you stopped stocking them?

20-04-2008, 18:21	#12 (permalink)
Phil 7JZGTE Join Date: Jul 2004 Location: Birmingham Posts: 6,895	2 reasons, there's so many different lengths of tie rod end, we ended up having to manufacture 4 differnent ends at great expense, and also because people not using lower arm's with bump stops, used the end of the tie rod end (hitting the lower arm). This broke a couple of shafts in the tie rod end, and we decided it wasn't worth selling them any more.. Our's were actually superb compaired to the toss that every other company apart from Ikeya Formula sell. the cheap ones bind the bearings even on standard lock. The failiure rate is generally so bad that we won't sell them at all, and for most peoples purposes the Tien rod ends are more than adequate.

20-04-2008, 19:36	#13 (permalink)
Brunosr13 dorifto kingu! Join Date: Jan 2006 Posts: 1,909	Ok, sorry for the question and thanks for the clean answer

21-04-2008, 14:11	#14 (permalink)
Rads_s13 Suspension Mangler Join Date: Aug 2004 Location: Bucks Posts: 1,106	I'm still running a pair of these 2 years on

21-04-2008, 14:14	#15 (permalink)
Phil 7JZGTE Join Date: Jul 2004 Location: Birmingham Posts: 6,895	As is my S14, and our R32 I think. I've only ever seen two failiures, and one of those is Bonbon, so that didn't really suprise me .

21-04-2008, 14:18	#16 (permalink)
Rads_s13 Suspension Mangler Join Date: Aug 2004 Location: Bucks Posts: 1,106	lol good point, the only thing that I couldn't do was use the tien rack spacers as I couldn't pull the rod ends in far enough to track it up, and over time the boots have worn through slightly where they touch the lock stops on the arms. but with the roads in bucks their a god send as if I didn't have them the sterring would jump about