Cheap RB25DET engine bits and spares - Drifting forum

**James** · 20-02-2008, 15:05

Right, this is now in the way, we need it gone

This is basically the remains of a year's worth of blowing up engines, but there's enough bits and pieces for someone to either put something back together very cheap or to have a load of useful spares.

This needs to go as a job lot, no sorting, no choosing, but at this price, it's well worth it even if you only want a few bits and pieces.

in short we've got:

RB25DET wide deck engine block, no crank or pistons. Same engine block as the GTR RB26DETT engine, but this is the rare RB25DET version from the 4X4 Stagea and fits standard RB25DET heads. It's currently overbored 0.5mm to 86.5mm but needs a further 0.5mm rebore due to slight damage on cylinder 1.
Comes with a Nissan larger capacity finned and baffled alloy sump that's been converted from 4WD to RWD fitment (this is the same sump you'd need to run an RB26DETT as RWD)

A good RB oil pump

1 x RB25DET shortnose crank professionally polished by David knight engines with 500 mile old standard sized ACL Calico coated main and big end bearings (the bearings alone cost around £225)

1 Standard RB25DET head in good condition. Head had been pressure tested and all valves lapped professionally by David Knight engines just prior to the plug dropping incident at Trax One valve has been replaced and relapped since.
Come with standard cams and sprockets

1 slightly det damaged RB25DET head with a few valves missing. May be handy to someone for valves or cam caps or could possibly be fixed or just slapped on if you're not bothered. Comes with an ok set of cams.

RB25DET standard bare engine block, suffered det damage and therefore possibly requires a rebore, but should be fine apart from that. Comes with shortnose crank that could do with a polish.

First person to turn up here with £180 in their hands gets the lot

Nelo · 20-02-2008, 15:18

Wow, cheap.

GmasterT · 20-02-2008, 15:29

aaaahhhh!!!!!! cock and bother

chunk · 20-02-2008, 15:33

Now THAT is cheap!!

**James** · 20-02-2008, 15:34

cheap yes, just need it all OUT THE BLOODY WAY

Matt_S · 20-02-2008, 17:54

Quote:

Originally Posted by James

cheap yes, just need it all OUT THE BLOODY WAY

LOL

Free bump

skyline · 22-02-2008, 08:58

sold !!!

ill come and get it next friday PAY DAY!!!! i can see all my wages heading toward driftworks soon!!

dont suppose you have any pistons do you

**James** · 22-02-2008, 09:34

If you're 100% serious about this and the intake manifold, then yeah, that's cool

There's about 10 good standard pistons in with this lot

skyline · 22-02-2008, 10:11

cool ill pop over next week then are you close to the office

**James** · 22-02-2008, 10:34

It's all at Driftworks HQ

The orange ones are spoken for I believe, but did you want the other set of cam covers holding?

skyline · 22-02-2008, 10:38

pm me the post code mate i only know where the office is

Stavros · 22-02-2008, 10:47

Argh tits, idve had that purely for the block and sump

skyline · 22-02-2008, 11:00

thanks james see ya soo sorry stav

**Bon Bon** · 22-02-2008, 11:46

Office is HQ is where everything is

**James** · 10-03-2008, 14:09

Still all here getting in the way

20-02-2008, 15:05	#1 (permalink)
James Lights out! Join Date: Jul 2004 Location: Birmingham UK Posts: 7,505	Cheap RB25DET engine bits and spares Right, this is now in the way, we need it gone This is basically the remains of a year's worth of blowing up engines, but there's enough bits and pieces for someone to either put something back together very cheap or to have a load of useful spares. This needs to go as a job lot, no sorting, no choosing, but at this price, it's well worth it even if you only want a few bits and pieces. in short we've got: RB25DET wide deck engine block, no crank or pistons. Same engine block as the GTR RB26DETT engine, but this is the rare RB25DET version from the 4X4 Stagea and fits standard RB25DET heads. It's currently overbored 0.5mm to 86.5mm but needs a further 0.5mm rebore due to slight damage on cylinder 1. Comes with a Nissan larger capacity finned and baffled alloy sump that's been converted from 4WD to RWD fitment (this is the same sump you'd need to run an RB26DETT as RWD) A good RB oil pump 1 x RB25DET shortnose crank professionally polished by David knight engines with 500 mile old standard sized ACL Calico coated main and big end bearings (the bearings alone cost around £225) 1 Standard RB25DET head in good condition. Head had been pressure tested and all valves lapped professionally by David Knight engines just prior to the plug dropping incident at Trax One valve has been replaced and relapped since. Come with standard cams and sprockets 1 slightly det damaged RB25DET head with a few valves missing. May be handy to someone for valves or cam caps or could possibly be fixed or just slapped on if you're not bothered. Comes with an ok set of cams. RB25DET standard bare engine block, suffered det damage and therefore possibly requires a rebore, but should be fine apart from that. Comes with shortnose crank that could do with a polish. First person to turn up here with £180 in their hands gets the lot

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

20-02-2008, 15:18	#2 (permalink)
Nelo Resident Alco Join Date: Dec 2004 Location: Alcoville, Ireland Posts: 1,849	Wow, cheap.

20-02-2008, 15:29	#3 (permalink)
GmasterT talks alot Join Date: Nov 2004 Location: Under an S-body Posts: 1,217	aaaahhhh!!!!!! cock and bother

20-02-2008, 15:33	#4 (permalink)
chunk Lt Dan Join Date: Jun 2005 Location: Leicester Posts: 3,635	Now THAT is cheap!!

20-02-2008, 15:34	#5 (permalink)
James Lights out! Join Date: Jul 2004 Location: Birmingham UK Posts: 7,505	cheap yes, just need it all OUT THE BLOODY WAY

22-02-2008, 08:58	#7 (permalink)
skyline dorifto kingu! Join Date: Oct 2006 Posts: 801	sold !!! ill come and get it next friday PAY DAY!!!! i can see all my wages heading toward driftworks soon!! dont suppose you have any pistons do you

22-02-2008, 09:34	#8 (permalink)
James Lights out! Join Date: Jul 2004 Location: Birmingham UK Posts: 7,505	If you're 100% serious about this and the intake manifold, then yeah, that's cool There's about 10 good standard pistons in with this lot

22-02-2008, 10:11	#9 (permalink)
skyline dorifto kingu! Join Date: Oct 2006 Posts: 801	cool ill pop over next week then are you close to the office

22-02-2008, 10:34	#10 (permalink)
James Lights out! Join Date: Jul 2004 Location: Birmingham UK Posts: 7,505	It's all at Driftworks HQ The orange ones are spoken for I believe, but did you want the other set of cam covers holding?

22-02-2008, 10:38	#11 (permalink)
skyline dorifto kingu! Join Date: Oct 2006 Posts: 801	pm me the post code mate i only know where the office is

22-02-2008, 10:47	#12 (permalink)
Stavros DEYTUKURJURBS Join Date: May 2005 Location: Cheltenham, Gloucestershire Posts: 9,550	Argh tits, idve had that purely for the block and sump

22-02-2008, 11:00	#13 (permalink)
skyline dorifto kingu! Join Date: Oct 2006 Posts: 801	thanks james see ya soo sorry stav

22-02-2008, 11:46	#14 (permalink)
Bon Bon Flame On!!!! Join Date: Jul 2004 Location: Moseley, Birmingham Posts: 5,035	Office is HQ is where everything is

10-03-2008, 14:09	#15 (permalink)
James Lights out! Join Date: Jul 2004 Location: Birmingham UK Posts: 7,505	Still all here getting in the way