Loads Of Great Stuff - Page 2 - Drifting forum

OrionRS · 12-05-2008, 23:36

Any wheels?

manfoot · 13-05-2008, 18:40

Quote:

Originally Posted by jap scrap

i might be going to newcastle in 2 weeks buying a e30 bm are you anywhere near there these boxes fit the sr20 engine ya

im quite far from there mate probaly a couple of hours but yes these boxes fit thr sr20 IF you swap the bell housings over

manfoot · 13-05-2008, 18:43

Quote:

Originally Posted by OrionRS

Any wheels?

yes mate standard s14 rims x6
and OZ racing 17x8 5x114.3 x4
all with good drift rubber

charlay · 14-05-2008, 14:50

S13 CA gearbox for 50quid collected? no crunches?

dread · 14-05-2008, 14:54

Can you get a pic of the 14a standard skirts please?

manfoot · 14-05-2008, 19:53

Quote:

Originally Posted by dread

Can you get a pic of the 14a standard skirts please?

what the standard ones

astra_coupe · 14-05-2008, 21:48

Quote:

Originally Posted by manfoot

yes mate standard s14 rims x6
and OZ racing 17x8 5x114.3 x4
all with good drift rubber

any pics of the oz racing ones? and what sort of price you looking for them?

dread · 14-05-2008, 22:55

Quote:

Originally Posted by manfoot

what the standard ones

Yeah the green ones listed....

Quote:

Originally Posted by manfoot

standard s14a side skirts in green missing end caps 40

manfoot · 24-05-2008, 12:26

back to the top every thing is open to offers now really need the cash

dread · 24-05-2008, 13:53

Still interested in those skirts.... need pics...

manfoot · 26-05-2008, 10:35

if it stops raining ill take pics

Suprash · 26-05-2008, 15:49

Hi mate regarding the following:

(1) standard cast manifold sr20det 30
(2) s14a front bumper in primer yellow has been choped about a bit 60
(3) s14 aftermarket rear bumper not perfect but reasonable condition 60

(1) I will take the exhaust manifold definitely.....£30 done.

(2) The front bumper that has been chopped about a bit and being held together with cable ties, I'll offer £30 on that as it looks like it needs some serious work on it to get it right.

(3) Again rear bumper looks like a bit of work is needed so again I'll offer £30 for the rear. (Can I ask what the other green section below is for, is that part of the rear bumper or a seperate one or what ?)

manfoot · 26-05-2008, 23:38

Quote:

Originally Posted by Suprash

Hi mate regarding the following:

(1) standard cast manifold sr20det 30
(2) s14a front bumper in primer yellow has been choped about a bit 60
(3) s14 aftermarket rear bumper not perfect but reasonable condition 60

(1) I will take the exhaust manifold definitely.....£30 done.

(2) The front bumper that has been chopped about a bit and being held together with cable ties, I'll offer £30 on that as it looks like it needs some serious work on it to get it right.

(3) Again rear bumper looks like a bit of work is needed so again I'll offer £30 for the rear. (Can I ask what the other green section below is for, is that part of the rear bumper or a seperate one or what ?)

pm me mate

manfoot · 27-05-2008, 17:47

back to the top

manfoot · 28-05-2008, 21:07

back up again

manfoot · 01-06-2008, 19:57

offers

nothin sold yet

pablo13 · 01-06-2008, 20:21

So are all three boxes are ok? no noisy bearings or dodgy syncros?

manfoot · 02-06-2008, 19:50

gearboxes are all un tested were sold to me as good but i havent driven on them

findlays13/s14 · 02-06-2008, 20:12

hi i sold him one with the rag in top of my s13 only done 81000 worked fine.
+ still got the spings

manfoot · 02-06-2008, 20:26

yes mate still got the springs pm me if your interested fella

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-05-2008, 23:36	#21 (permalink)
OrionRS dorifto kingu! Join Date: Sep 2006 Location: S E London/Kent Posts: 1,289	Any wheels?

14-05-2008, 14:50	#24 (permalink)
charlay spl dori master Join Date: Dec 2006 Posts: 265	S13 CA gearbox for 50quid collected? no crunches?

14-05-2008, 14:54	#25 (permalink)
dread doughnutter Join Date: Feb 2008 Posts: 30	Can you get a pic of the 14a standard skirts please?

24-05-2008, 12:26	#29 (permalink)
manfoot TEAM GREEN Join Date: Aug 2007 Location: hemel hempstead Posts: 391	back to the top every thing is open to offers now really need the cash

24-05-2008, 13:53	#30 (permalink)
dread doughnutter Join Date: Feb 2008 Posts: 30	Still interested in those skirts.... need pics...

26-05-2008, 10:35	#31 (permalink)
manfoot TEAM GREEN Join Date: Aug 2007 Location: hemel hempstead Posts: 391	if it stops raining ill take pics

26-05-2008, 15:49	#32 (permalink)
Suprash touge runner Join Date: Jun 2007 Location: Basingstoke, Hampshire Posts: 223	Hi mate regarding the following: (1) standard cast manifold sr20det 30 (2) s14a front bumper in primer yellow has been choped about a bit 60 (3) s14 aftermarket rear bumper not perfect but reasonable condition 60 (1) I will take the exhaust manifold definitely.....£30 done. (2) The front bumper that has been chopped about a bit and being held together with cable ties, I'll offer £30 on that as it looks like it needs some serious work on it to get it right. (3) Again rear bumper looks like a bit of work is needed so again I'll offer £30 for the rear. (Can I ask what the other green section below is for, is that part of the rear bumper or a seperate one or what ?)

27-05-2008, 17:47	#34 (permalink)
manfoot TEAM GREEN Join Date: Aug 2007 Location: hemel hempstead Posts: 391	back to the top

28-05-2008, 21:07	#35 (permalink)
manfoot TEAM GREEN Join Date: Aug 2007 Location: hemel hempstead Posts: 391	back up again

01-06-2008, 19:57	#36 (permalink)
manfoot TEAM GREEN Join Date: Aug 2007 Location: hemel hempstead Posts: 391	offers nothin sold yet

01-06-2008, 20:21	#37 (permalink)
pablo13 Piston Melter Join Date: Aug 2006 Location: London/Essex Border Posts: 331	So are all three boxes are ok? no noisy bearings or dodgy syncros?

02-06-2008, 19:50	#38 (permalink)
manfoot TEAM GREEN Join Date: Aug 2007 Location: hemel hempstead Posts: 391	gearboxes are all un tested were sold to me as good but i havent driven on them

02-06-2008, 20:12	#39 (permalink)
findlays13/s14 doughnutter Join Date: Sep 2007 Posts: 47	hi i sold him one with the rag in top of my s13 only done 81000 worked fine. + still got the spings

02-06-2008, 20:26	#40 (permalink)
manfoot TEAM GREEN Join Date: Aug 2007 Location: hemel hempstead Posts: 391	yes mate still got the springs pm me if your interested fella