Work Equip 18" - Drifting forum

boostedliner · 16-07-2008, 17:44

Got a set of these, good condition, highly polished

Rears are 10x18
Fronts are 9x18

offset is +47 all round

5 x 114.3 pcd

Would like to keep them but cash flow is a bit short at the moment so needs must and all that.

now £475 ovno

Came off Toyota Supra MK4 which was a direct bolt on

Jord · 16-07-2008, 18:08

Any chance you misread the label and the offset is +7 not +47, or maybe even +17? If not then

shaneeng2003 · 16-07-2008, 18:17

PM sent

T.J. · 16-07-2008, 18:27

Quote:

Originally Posted by Jord

Any chance you misread the label and the offset is +7 not +47, or maybe even +17? If not then

what he said. +47 offset is just wrong. Need to double check

boostedliner · 16-07-2008, 19:08

Just been out and double checked and here it is

Jord · 16-07-2008, 20:47

Damn.

Perriss21 · 16-07-2008, 21:00

shame

boostedliner · 16-07-2008, 21:25

Dont see the problem with the offset myself??

I mounted them upto my GTST and with a 10mm spacer they would fit nicely.

Jimthejunior · 16-07-2008, 21:46

Them wheels are sexual. Such a shame about the ofset. You shouldn't need ANY spacers to get 10j's looking sweet on a gtst.

shaft · 16-07-2008, 22:01

Quote:

Originally Posted by Jimthejunior

Them wheels are sexual.

2nd that. have them on my supra

good luck with the sale

SJS design · 16-07-2008, 22:57

Hmm niice, would these fit the R34 GTT no probs?

Where are you based mate?

Boosted can you put up a pic of them on your GTST??

Si

boostedliner · 16-07-2008, 23:46

thats the clearance between the wheel and suspension leg would need a spacer to clear the spring and platform I reckon.

And this is the work equips I ve got on the car at the moment 8.5x18 front and 9x18 rear just for an idea what they look like.

Im located in west sussex 10 miles from Gatwick

As for fitting straight onto a GTT I dont know, think these were previously fitted to a supra.

When I bolted one of the 10's onto the rear of the GTST there looked to be enough room for a 10mm spacer and have enough arch clearance, would have to probably be a stretched tyre to make it work without rubbing issues tho but hard to tell without havening a tyre on it.

gtst-gav · 17-07-2008, 20:44

hi boostedliner,
im in Redhill so can collect these wheels pretty much straight away,
possibly tonight if your around?

do you have any more detailed pictures of the wheels?
is there any damage to the wheels and has there been any repairs carried out, buckles removed, welding etc?

thanks Gav

Quail · 17-07-2008, 21:14

Ahh shame bout the offsets, although these should be a simple fit for the toyota boys

boostedliner · 17-07-2008, 22:55

Gav you have pm

boostedliner · 18-07-2008, 19:58

-bump-

boostedliner · 20-07-2008, 13:21

-bump-

boostedliner · 23-07-2008, 11:52

Had the chance to fit one of the wheels to my skyline to see what fitment was like

With a 255 tyre on there they will fit fine!!

BTTT

LiGhTnInG · 23-07-2008, 12:08

Shame about the offsets

boostedliner · 23-07-2008, 13:35

Ok enough with going on about the offsets now, can people only post if they are intersted

thanks

16-07-2008, 17:44	#1 (permalink)
boostedliner doughnutter Join Date: Oct 2007 Posts: 42	Work Equip 18" Got a set of these, good condition, highly polished Rears are 10x18 Fronts are 9x18 offset is +47 all round 5 x 114.3 pcd Would like to keep them but cash flow is a bit short at the moment so needs must and all that. now £475 ovno Came off Toyota Supra MK4 which was a direct bolt on Last edited by boostedliner : Yesterday at 10:01.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

16-07-2008, 18:08	#2 (permalink)
Jord GRD Drift Club Join Date: Sep 2004 Location: Peterborough Posts: 7,798	Any chance you misread the label and the offset is +7 not +47, or maybe even +17? If not then

16-07-2008, 18:17	#3 (permalink)
shaneeng2003 doughnutter Join Date: Sep 2006 Location: LUTON Posts: 35	PM sent

16-07-2008, 19:08	#5 (permalink)
boostedliner doughnutter Join Date: Oct 2007 Posts: 42	Just been out and double checked and here it is

16-07-2008, 20:47	#6 (permalink)
Jord GRD Drift Club Join Date: Sep 2004 Location: Peterborough Posts: 7,798	Damn.

16-07-2008, 21:00	#7 (permalink)
Perriss21 doughnutter Join Date: May 2006 Posts: 67	shame

16-07-2008, 21:25	#8 (permalink)
boostedliner doughnutter Join Date: Oct 2007 Posts: 42	Dont see the problem with the offset myself?? I mounted them upto my GTST and with a 10mm spacer they would fit nicely.

16-07-2008, 21:46	#9 (permalink)
Jimthejunior Represent Join Date: Apr 2007 Posts: 1,834	Them wheels are sexual. Such a shame about the ofset. You shouldn't need ANY spacers to get 10j's looking sweet on a gtst.

16-07-2008, 22:57	#11 (permalink)
SJS design spl dori master Join Date: Mar 2007 Location: Essex Posts: 321	Hmm niice, would these fit the R34 GTT no probs? Where are you based mate? Boosted can you put up a pic of them on your GTST?? Si

16-07-2008, 23:46	#12 (permalink)
boostedliner doughnutter Join Date: Oct 2007 Posts: 42	thats the clearance between the wheel and suspension leg would need a spacer to clear the spring and platform I reckon. And this is the work equips I ve got on the car at the moment 8.5x18 front and 9x18 rear just for an idea what they look like. Im located in west sussex 10 miles from Gatwick As for fitting straight onto a GTT I dont know, think these were previously fitted to a supra. When I bolted one of the 10's onto the rear of the GTST there looked to be enough room for a 10mm spacer and have enough arch clearance, would have to probably be a stretched tyre to make it work without rubbing issues tho but hard to tell without havening a tyre on it.

17-07-2008, 20:44	#13 (permalink)
gtst-gav gripper Join Date: Jul 2008 Posts: 1	hi boostedliner, im in Redhill so can collect these wheels pretty much straight away, possibly tonight if your around? do you have any more detailed pictures of the wheels? is there any damage to the wheels and has there been any repairs carried out, buckles removed, welding etc? thanks Gav

17-07-2008, 21:14	#14 (permalink)
Quail Kouki Monster Join Date: Feb 2006 Location: Milton Keynes & Portsmouth Posts: 1,013	Ahh shame bout the offsets, although these should be a simple fit for the toyota boys

17-07-2008, 22:55	#15 (permalink)
boostedliner doughnutter Join Date: Oct 2007 Posts: 42	Gav you have pm

18-07-2008, 19:58	#16 (permalink)
boostedliner doughnutter Join Date: Oct 2007 Posts: 42	-bump-

20-07-2008, 13:21	#17 (permalink)
boostedliner doughnutter Join Date: Oct 2007 Posts: 42	-bump-

23-07-2008, 11:52	#18 (permalink)
boostedliner doughnutter Join Date: Oct 2007 Posts: 42	Had the chance to fit one of the wheels to my skyline to see what fitment was like With a 255 tyre on there they will fit fine!! BTTT

23-07-2008, 12:08	#19 (permalink)
LiGhTnInG Doricomotion Join Date: Aug 2005 Location: BANNED :p :p Posts: 7,735	Shame about the offsets

23-07-2008, 13:35	#20 (permalink)
boostedliner doughnutter Join Date: Oct 2007 Posts: 42	Ok enough with going on about the offsets now, can people only post if they are intersted thanks