Brand new, never fitted Holset HX35 Turbo - Drifting forum

doz · 22-07-2008, 13:44

These turbos are supposed to be an equivalent to the Garrett GT35r.. I'll find out the exact specs of it and put them up. The exhaust housing is T3 fitment and 3" v-band exhaust fitment. The compressor housing is an anti-surge housing, but has a bung blocking this off, which is easily removed by taking off the C-clip retaining it.
Its internally gated, but can be easily modified to block it off to fit an external gate.
These turbos are meant to be extremely good spoolers and are capable of over 500bhp on a petrol engine. They are also capable of holding 3bar of pressure lol.

Bought from Holset themselves this would set you back around £400-£450 +VAT.

I'm asking for £350 for a quick sale...

14 cm² or A/R 1.05 for the turbine housing.

4" compressor inlet.

doz · 22-07-2008, 23:31

bump

s13silvia · 23-07-2008, 10:06

good price for some big hp increase there... oooh if only I had the spare dough

doz · 24-07-2008, 00:11

This is a mad turbo for the money

matt22robbins · 24-07-2008, 07:17

You have PM mate

Matt

Mattolodis · 24-07-2008, 10:26

Interested in the turbo but wheres the actuator and what's the v best u could do posted?

Matt

doz · 24-07-2008, 10:32

prov sold

matt22robbins · 04-09-2008, 15:26

Hello guys,

I bought this turbo of Doz, but im not going to get the chance to fit it as im now having to sell my project

( so if anybody's interested in it its back up for sale for £340 which is what i bought it for of Doz. all the details are as above, need to sell it in the next fornight if possible.

I live off junction 12 M40, Gaydon, West Midlands

Please PM me if your interested.

Cheers

Matt

matt22robbins · 25-09-2008, 07:29

Bump ttt! anyone interested???

Have decided to run a GT2871R instead so will not be fitting this to my project before selling it

Cheers

Matt

22-07-2008, 13:44	#1 (permalink)
doz animal!! Join Date: Apr 2007 Location: Shropshire/Worcestershire Posts: 1,543	Brand new, never fitted Holset HX35 Turbo These turbos are supposed to be an equivalent to the Garrett GT35r.. I'll find out the exact specs of it and put them up. The exhaust housing is T3 fitment and 3" v-band exhaust fitment. The compressor housing is an anti-surge housing, but has a bung blocking this off, which is easily removed by taking off the C-clip retaining it. Its internally gated, but can be easily modified to block it off to fit an external gate. These turbos are meant to be extremely good spoolers and are capable of over 500bhp on a petrol engine. They are also capable of holding 3bar of pressure lol. Bought from Holset themselves this would set you back around £400-£450 +VAT. I'm asking for £350 for a quick sale... 14 cm² or A/R 1.05 for the turbine housing. 4" compressor inlet. Last edited by doz : 22-07-2008 at 14:41.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

22-07-2008, 23:31	#2 (permalink)
doz animal!! Join Date: Apr 2007 Location: Shropshire/Worcestershire Posts: 1,543	bump

23-07-2008, 10:06	#3 (permalink)
s13silvia doughnut muncher Join Date: Nov 2004 Posts: 1,245	good price for some big hp increase there... oooh if only I had the spare dough

24-07-2008, 00:11	#4 (permalink)
doz animal!! Join Date: Apr 2007 Location: Shropshire/Worcestershire Posts: 1,543	This is a mad turbo for the money

24-07-2008, 07:17	#5 (permalink)
matt22robbins tail slider Join Date: Mar 2008 Posts: 148	You have PM mate Matt

24-07-2008, 10:26	#6 (permalink)
Mattolodis tail slider Join Date: Jul 2007 Location: Kent Posts: 149	Interested in the turbo but wheres the actuator and what's the v best u could do posted? Matt

24-07-2008, 10:32	#7 (permalink)
doz animal!! Join Date: Apr 2007 Location: Shropshire/Worcestershire Posts: 1,543	prov sold

04-09-2008, 15:26	#8 (permalink)
matt22robbins tail slider Join Date: Mar 2008 Posts: 148	Hello guys, I bought this turbo of Doz, but im not going to get the chance to fit it as im now having to sell my project ( so if anybody's interested in it its back up for sale for £340 which is what i bought it for of Doz. all the details are as above, need to sell it in the next fornight if possible. I live off junction 12 M40, Gaydon, West Midlands Please PM me if your interested. Cheers Matt

25-09-2008, 07:29	#9 (permalink)
matt22robbins tail slider Join Date: Mar 2008 Posts: 148	Bump ttt! anyone interested??? Have decided to run a GT2871R instead so will not be fitting this to my project before selling it Cheers Matt