s13, stage 3 chip,z32, 444 injectors with ((t25))?? - Drifting forum

haza88 · 09-05-2008, 18:41

bassicly i have a uk s13 with all the usual starters like filter, exhust, intercooler,rad, running 1 bar etc and iv recently brought a stage 3 chip,z32, 444 injectors can i fit these in conjunction with a standard t25 turbo??

how will it efect it and will i gain anything from fitting these without going to a t28 or bigger.

any help much appreciated

Andy_f · 09-05-2008, 18:45

No. You need a GT28rs for stage 3. You can just about get away with a T28 with stage 3, but even then it will overfuel. A T25 just isn't capable of flowing enough air for that level of tune.

haza88 · 09-05-2008, 18:59

i did think that would be the case, so with a t25 would a z32 and a stage 2 chip work? on standard injectors

Andy_f · 09-05-2008, 19:01

If you have it custom mapped to allow for that specific mod then yes - although there's not really much point. Basically no, a stage 2 chip needs a standard AFM and standard injectors.

Edit: depends where you got the chip from. I'm referring to H-Dev chips.

haza88 · 09-05-2008, 19:03

ok thanks for your help mate, sorry for the simple questions lol

Andy_f · 09-05-2008, 19:14

No problem.

Mr Bizzle · 10-05-2008, 00:02

Standard rule of thumb is
DON'T USE STAGED CHIPS THEY ARE UTTER TRIPE

Just get somebody to make one specifically for your car. Save yourself time, save yourself money and in gain reliablity and horsepower.

09-05-2008, 18:41	#1 (permalink)
haza88 touge runner Join Date: Oct 2007 Posts: 207	s13, stage 3 chip,z32, 444 injectors with ((t25))?? bassicly i have a uk s13 with all the usual starters like filter, exhust, intercooler,rad, running 1 bar etc and iv recently brought a stage 3 chip,z32, 444 injectors can i fit these in conjunction with a standard t25 turbo?? how will it efect it and will i gain anything from fitting these without going to a t28 or bigger. any help much appreciated

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-05-2008, 18:45	#2 (permalink)
Andy_f Quad tone. Join Date: Sep 2005 Location: Redditch/Birmingham Posts: 1,686	No. You need a GT28rs for stage 3. You can just about get away with a T28 with stage 3, but even then it will overfuel. A T25 just isn't capable of flowing enough air for that level of tune.

09-05-2008, 18:59	#3 (permalink)
haza88 touge runner Join Date: Oct 2007 Posts: 207	i did think that would be the case, so with a t25 would a z32 and a stage 2 chip work? on standard injectors

09-05-2008, 19:01	#4 (permalink)
Andy_f Quad tone. Join Date: Sep 2005 Location: Redditch/Birmingham Posts: 1,686	If you have it custom mapped to allow for that specific mod then yes - although there's not really much point. Basically no, a stage 2 chip needs a standard AFM and standard injectors. Edit: depends where you got the chip from. I'm referring to H-Dev chips.

09-05-2008, 19:03	#5 (permalink)
haza88 touge runner Join Date: Oct 2007 Posts: 207	ok thanks for your help mate, sorry for the simple questions lol

09-05-2008, 19:14	#6 (permalink)
Andy_f Quad tone. Join Date: Sep 2005 Location: Redditch/Birmingham Posts: 1,686	No problem.

10-05-2008, 00:02	#7 (permalink)
Mr Bizzle Team Green Join Date: Jun 2005 Location: Beaconsfield, Bucks Posts: 3,800	Standard rule of thumb is DON'T USE STAGED CHIPS THEY ARE UTTER TRIPE Just get somebody to make one specifically for your car. Save yourself time, save yourself money and in gain reliablity and horsepower.