Want to 5-stud a R32, which hubs can i use? - Drifting forum

TwinturboCH · 17-07-2008, 16:20

Simple question really, can I use S14 ones or do they have to be Skyline etc etc. I need to swap 4-stud ones on a 4-door R32 for 5-stud ones.

Same goes for the brakes, what cars can i get them from?

Thank-you-please

Brunosr13 · 17-07-2008, 16:49

Quote:

Originally Posted by TwinturboCH

Simple question really, can I use S14 ones or do they have to be Skyline etc etc. I need to swap 4-stud ones on a 4-door R32 for 5-stud ones.

Same goes for the brakes, what cars can i get them from?

Thank-you-please

With out any problems mate, I have on my car, will be good if also you can have a front lower arms

, rear just replace the hub and drill the stock discs, you can use the front brakes just need swap the flexi pipe.

TwinturboCH · 17-07-2008, 20:13

Quote:

Originally Posted by Brunosr13

With out any problems mate, I have on my car, will be good if also you can have a front lower arms

, rear just replace the hub and drill the stock discs, you can use the front brakes just need swap the flexi pipe.

In english?

LOL joking, I think i get what you mean. Thanks, but could anyone be totally clear about what bits I can use as I have an my old stripped S14 shell sat here that i could rape for the parts.

**Mitch** · 17-07-2008, 20:22

You can use the S14 rears but need R32 fronts.

Dex · 17-07-2008, 21:36

no you need to keep it 4 stud, and sell it to me

gaz_moose · 18-07-2008, 11:06

get some r32gtst front hubs they should be 10 a penny
then get these bits off your breaker
rear hubs
front lower arms
front calipers
brake master cylinder

then just drill your rear discs to 5 stud

TwinturboCH · 20-07-2008, 16:27

If I found R32 hubs for front and rear, what other stuff would i need?

Just brakes?

gaz_moose · 20-07-2008, 18:57

just brakes unless you drill your discs to 5 stud

TwinturboCH · 20-07-2008, 18:59

Sweet

Thanks guys, may well have more questions later LOL

17-07-2008, 16:20	#1 (permalink)
TwinturboCH dorifto kingu! Join Date: Jul 2004 Location: Bromley Posts: 4,784	Want to 5-stud a R32, which hubs can i use? Simple question really, can I use S14 ones or do they have to be Skyline etc etc. I need to swap 4-stud ones on a 4-door R32 for 5-stud ones. Same goes for the brakes, what cars can i get them from? Thank-you-please

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

17-07-2008, 20:22	#4 (permalink)
Mitch Driftgarage Join Date: Jul 2004 Location: Derby fulltime Posts: 10,429	You can use the S14 rears but need R32 fronts.

17-07-2008, 21:36	#5 (permalink)
Dex kut! Join Date: Nov 2004 Location: Clogsville Posts: 9,220	no you need to keep it 4 stud, and sell it to me

18-07-2008, 11:06	#6 (permalink)
gaz_moose .MTM. Join Date: Jun 2005 Location: under your bed Posts: 3,110	get some r32gtst front hubs they should be 10 a penny then get these bits off your breaker rear hubs front lower arms front calipers brake master cylinder then just drill your rear discs to 5 stud

20-07-2008, 16:27	#7 (permalink)
TwinturboCH dorifto kingu! Join Date: Jul 2004 Location: Bromley Posts: 4,784	If I found R32 hubs for front and rear, what other stuff would i need? Just brakes?

20-07-2008, 18:57	#8 (permalink)
gaz_moose .MTM. Join Date: Jun 2005 Location: under your bed Posts: 3,110	just brakes unless you drill your discs to 5 stud

20-07-2008, 18:59	#9 (permalink)
TwinturboCH dorifto kingu! Join Date: Jul 2004 Location: Bromley Posts: 4,784	Sweet Thanks guys, may well have more questions later LOL