Hi my name is Michael I am from Slovakia ( Sorry for my english ) I am touring something I bought three years ago. This is an E46 320d series 110 kilowatts but I got it modified while the 170hp and 400nm . gradually they started to make some changes to the chassis to the self-locking with a ratio of 3.09. plans are still tinker with the Turbo, with cooling and also plan to put larger puffs The car is beautiful ... Later I bought e46 328ci pictures will come later. {} upload image online It looked like this when I bought it {} image hosting sites 170ps 400nm {} image hosting no account {} free image host ratio 3.09 {} windows screenshot {} pic hosting remove exhaust {} upload img ta technix {} image url upload {} picture hosting {} screen shot windows 7 {} image hosting over 2mb {} free image upload {} adult image {} image hosting no account {} upload imagem {} image hosting no registration {} pc screenshot {} pc screenshot {} screenshot {} photo uploading {} free photo hosting {} screengrab
Later I bought a 328ci imgupload free picture upload screen shot temp image upload upload image upload foto
then an accident in which she crashed into me ... x5 ... Damaged my entire rear axle so that we start from scratch image uploading screen shot windows 7 image sharing sites free photo hosting I am most sorry about what happened with electrons because in our country the problem procure these wheels (bbs rs 701)...snapped to 3x uploading pictures image hosting over 10mb
Recently, the car gradually repaired...and to my surprise it was corrected by the wheel ...as a donor came Compact free picture upload image hosting gif temporary image hosting free image hosting image upload no compression photo sharing pic host repaired wheel image hosting over 10mb photo hosting after repair 20mb image hosting image hosting no register images hosting
I recently purchased a pair of electrons on the coupe and a few odds and ends upload pictures upload pictures free screen capture free picture upload
today again something done on your car ... Set the turbo pressure and the car had a smoother running up to speed...turbo already blowing something about 1.55bar adult photo hosting
Yesterday, he casts new exhaust that was the E39 540i, is a little quieter and more useful than daily. also we were yesterday finally wash the car: D ... meanwhile withdrew map from the control unit and could be adjusted so I wonder what will be the value but it should be something around 200 hp and 430nm post images
We still have to adjust map very nicely this works, the car has a smoother functioning. at 2750 rpm turbo pressure has 1.67bar. We will see the when we go on the dyno.
BBS is up, today something done also for coupe. They set some unnecessary things out of the car and installed the seat and then tested seat
We were a little take a ride, the problem is that the car do not pull at lower speeds, it's probably a bad intake...give intake in 3.0i ? or give direct intake K & N?
yet I am waiting for money so it looks something like this, resolves the intake and chassis yet we'll see how it goes further.