wanted 180sx modded - Drifting forum

phil180sx · 06-05-2008, 16:57

Hi all,
I'm looking for a 180sx turbo(ps13 rps13 krps13 etc) drift road car running around 300bhp 70k miles or less an is under £7500 otr
mods being very un pacific:

uprate injectors
uprate fuel pump
uprate turbo
FMIC
3 (2) layer rad
oil cooler
stainless manifold
3in de-cat pipe
3in full system

2 matching bucket seats

mappable ECU
boost controller

wide body
dished alloys
5 stud conversion
adjustable coilovers
LSD (Not welded diff!)

Can't find anything so I've resorted in post in the want sec

If your 180 has say 80% of those mods an is in Good

nick let me know

tr1cky · 06-05-2008, 19:38

Take a look at mine in the for sale section, has most of the bits your after and the things it doesn't you could easily add with your budget!

uprate injectors- Yes
uprate fuel pump- Yes
uprate turbo- Yes
FMIC- Yes
3 (2) layer rad- Not fitted, but inc with car (new)
oil cooler- no
stainless manifold- no
3in de-cat pipe- Yes
3in full system- Yes

2 matching bucket seats- no, but do have a matching drivers, so could swap them over!

mappable ECU- no
boost controller- no, as only half was present when it was imported, but will inc what I have (profec BII)

wide body- Yes
dished alloys- No, but two sets of wheels, sell them and get some dishy ones
5 stud conversion- Yes
adjustable coilovers- yes
LSD (Not welded diff!)- Yes, Nismo

Needs a couple of things to make it road ready, but straight forward stuff.

PM me if of any interest for any more info you need.

thanks

**Mitch** · 06-05-2008, 19:56

Normally you'd have a PM from me, as mine checks most of your boxes, but I'm sticking with it

Good luck in your search....maybe Bruno could be tempted, as his PS13 has all those bits

**Mitch** · 07-05-2008, 07:10

Or send me the monies and I'll make you one

Seriously though, I'm not sure if Jamie@Garagemac has sold his PS13 yet. It's VERY nice

phil180sx · 07-05-2008, 10:24

Thanks guys

tr1cky your 180sx is sweet an i would if i could, the time it would take me to rase even 1k more is much longer than i want to wait i could build a car in that time

(an im rubbish on mechanics)

!

Mitch, I was thinking of building one with a helper (said prev rubbish on mechanics) but i found the cost of the car and the parts is £££££££ to much

Come on let yours go to a good home

Seriously if you change your mind pm me

I'll pm Jamie@Garagemac
Cheers Mitch
If anyone know where theres one of interest, for under £7500 let me know

chunk · 07-05-2008, 10:27

Quote:

Originally Posted by Mitch

Normally you'd have a PM from me, as mine checks most of your boxes, but I'm sticking with it

I'm glad i was sitting down when i read that!!

J's PS13 is sexual, buy it!

neilthenut · 07-05-2008, 11:46

1992 180sx
dark green
5 stud, with 4 pots
fully roes jointed adjusable arms
full 3inch turbo back zorst
walboro pump
HKS induction kit
HKS adj actoator
110,00kms (68,000miles)
big Rad
2way diff
turbo timer

ok, no where near the spec u want, but no where near the price u want ethier!!!!!
looking for £3750ono ish. .

done1 driftday, done silverstone track day, doing castle combe next sat

it is fully registered, and on the road, i "choose" not to run a front plate- as it looks gay on this car!!!

damodeane · 07-05-2008, 20:03

have a 180 for sale there with everything u want and loads more for 10000 euro whatever that is in sterling its 346 bhp and has only done 2 events since the engine was rebuilt

-***JOKER***- · 07-05-2008, 22:37

wide body
dished alloys
5 stud conversion
adjustable coilovers

except this lot you can have mine for 3k after 14th pod!!!

phil180sx · 08-05-2008, 18:45

I found a car im interested in, don't want to say to much yet

Thanks to everyone who posted

06-05-2008, 16:57	#1 (permalink)
phil180sx gripper Join Date: Apr 2008 Posts: 27	wanted 180sx modded Hi all, I'm looking for a 180sx turbo(ps13 rps13 krps13 etc) drift road car running around 300bhp 70k miles or less an is under £7500 otr mods being very un pacific: uprate injectors uprate fuel pump uprate turbo FMIC 3 (2) layer rad oil cooler stainless manifold 3in de-cat pipe 3in full system 2 matching bucket seats mappable ECU boost controller wide body dished alloys 5 stud conversion adjustable coilovers LSD (Not welded diff!) Can't find anything so I've resorted in post in the want sec If your 180 has say 80% of those mods an is in Goodnick let me know

07-05-2008, 10:24	#5 (permalink)
phil180sx gripper Join Date: Apr 2008 Posts: 27	Thanks guys tr1cky your 180sx is sweet an i would if i could, the time it would take me to rase even 1k more is much longer than i want to wait i could build a car in that time (an im rubbish on mechanics)! Mitch, I was thinking of building one with a helper (said prev rubbish on mechanics) but i found the cost of the car and the parts is £££££££ to much Come on let yours go to a good home Seriously if you change your mind pm me I'll pm Jamie@Garagemac Cheers Mitch If anyone know where theres one of interest, for under £7500 let me know

07-05-2008, 11:46	#7 (permalink)
neilthenut tail slider Join Date: Mar 2007 Location: west mids/ wales Posts: 108	my 180 1992 180sx dark green 5 stud, with 4 pots fully roes jointed adjusable arms full 3inch turbo back zorst walboro pump HKS induction kit HKS adj actoator 110,00kms (68,000miles) big Rad 2way diff turbo timer ok, no where near the spec u want, but no where near the price u want ethier!!!!! looking for £3750ono ish. . done1 driftday, done silverstone track day, doing castle combe next sat it is fully registered, and on the road, i "choose" not to run a front plate- as it looks gay on this car!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-05-2008, 19:38	#2 (permalink)
tr1cky tail slider Join Date: Nov 2006 Location: southampton Posts: 87	Take a look at mine in the for sale section, has most of the bits your after and the things it doesn't you could easily add with your budget! uprate injectors- Yes uprate fuel pump- Yes uprate turbo- Yes FMIC- Yes 3 (2) layer rad- Not fitted, but inc with car (new) oil cooler- no stainless manifold- no 3in de-cat pipe- Yes 3in full system- Yes 2 matching bucket seats- no, but do have a matching drivers, so could swap them over! mappable ECU- no boost controller- no, as only half was present when it was imported, but will inc what I have (profec BII) wide body- Yes dished alloys- No, but two sets of wheels, sell them and get some dishy ones 5 stud conversion- Yes adjustable coilovers- yes LSD (Not welded diff!)- Yes, Nismo Needs a couple of things to make it road ready, but straight forward stuff. PM me if of any interest for any more info you need. thanks

06-05-2008, 19:56	#3 (permalink)
Mitch DriftGarage Join Date: Jul 2004 Location: Derby/Oxford Posts: 9,396	Normally you'd have a PM from me, as mine checks most of your boxes, but I'm sticking with it Good luck in your search....maybe Bruno could be tempted, as his PS13 has all those bits

07-05-2008, 07:10	#4 (permalink)
Mitch DriftGarage Join Date: Jul 2004 Location: Derby/Oxford Posts: 9,396	Or send me the monies and I'll make you one Seriously though, I'm not sure if Jamie@Garagemac has sold his PS13 yet. It's VERY nice

07-05-2008, 20:03	#8 (permalink)
damodeane gripper Join Date: Oct 2007 Location: mayo ireland Posts: 29	have a 180 for sale there with everything u want and loads more for 10000 euro whatever that is in sterling its 346 bhp and has only done 2 events since the engine was rebuilt

07-05-2008, 22:37	#9 (permalink)
-*JOKER*- Shopping Trolley Drifter Join Date: Oct 2005 Location: Soutampton Posts: 1,589	wide body dished alloys 5 stud conversion adjustable coilovers except this lot you can have mine for 3k after 14th pod!!!

08-05-2008, 18:45	#10 (permalink)
phil180sx gripper Join Date: Apr 2008 Posts: 27	I found a car im interested in, don't want to say to much yet Thanks to everyone who posted