clutch kit for SR20 wanted - Page 2 - Drifting forum

initial_j · 08-07-2008, 13:35

nope all the same, and iirc me and jord both have redtop SR's.

runaway_robot · 08-07-2008, 13:36

Quote:

Originally Posted by initial_j

nope all the same, and iirc me and jord both have redtop SR's.

So do i lol like i said, learn something everyday, and its good to know.

initial_j · 08-07-2008, 13:39

however to confuse things even more, i dont actually think PS13s ever came with redtop SR20dets, mine was stuck in at a later date. could be wrong though

Jord · 08-07-2008, 13:57

Later PS13 did come with Redtops, my chassis plate confirms this.

RunawayRobot - PS13s use S13 chassis but the SR20 is fairly similar to S14 spec. Hence why Im using an S14 gearbox now, S14 rear subframes fit - S14 front arms fit. S14 engines drop straight in too.

initial_j · 10-07-2008, 13:47

you get the clutch out yet jord?

runaway_robot · 10-07-2008, 13:52

Yea they did come with redtops as jord has said. Also knew the subframes could be switched with the S14, just thought the boxes were different.

Jord · 10-07-2008, 13:53

Didn't happen yet mate, probably going to be Monday/Tuesday next week now.

initial_j · 10-07-2008, 13:55

ok mate, ive been offered an ORC 409 series race clutch thats only done 5k, might well get that, gonna see if anyones used one....

Jord · 10-07-2008, 15:29

Ogura Racing Clutch 409 is rated to 400ps or 400lb/ft and is a single plate. What flywheel are you using?

initial_j · 10-07-2008, 17:18

tbh, not actually sure as didnt get much of a spec list with the car when i got it, so wont know until i open it up at the wkend, probably standard though?

Jord · 10-07-2008, 17:34

You'll probably need the fly reskimmed if your changing the clutch I think.

initial_j · 10-07-2008, 17:36

was considering doing that, maybe have it lightened at the same time as theres a good machiners down the road,

still interested in your twin plate, soon as you got a rough price and condition

Jord · 10-07-2008, 19:15

Will keep you posted

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-07-2008, 13:35	#21 (permalink)
initial_j has issues.. Join Date: Sep 2006 Location: Canterbury yo! Posts: 4,399	nope all the same, and iirc me and jord both have redtop SR's.

08-07-2008, 13:39	#23 (permalink)
initial_j has issues.. Join Date: Sep 2006 Location: Canterbury yo! Posts: 4,399	however to confuse things even more, i dont actually think PS13s ever came with redtop SR20dets, mine was stuck in at a later date. could be wrong though

08-07-2008, 13:57	#24 (permalink)
Jord GRD Drift Club Join Date: Sep 2004 Location: Peterborough Posts: 7,766	Later PS13 did come with Redtops, my chassis plate confirms this. RunawayRobot - PS13s use S13 chassis but the SR20 is fairly similar to S14 spec. Hence why Im using an S14 gearbox now, S14 rear subframes fit - S14 front arms fit. S14 engines drop straight in too.

10-07-2008, 13:47	#25 (permalink)
initial_j has issues.. Join Date: Sep 2006 Location: Canterbury yo! Posts: 4,399	you get the clutch out yet jord?

10-07-2008, 13:52	#26 (permalink)
runaway_robot spl dori master Join Date: May 2007 Posts: 276	Yea they did come with redtops as jord has said. Also knew the subframes could be switched with the S14, just thought the boxes were different.

10-07-2008, 13:53	#27 (permalink)
Jord GRD Drift Club Join Date: Sep 2004 Location: Peterborough Posts: 7,766	Didn't happen yet mate, probably going to be Monday/Tuesday next week now.

10-07-2008, 13:55	#28 (permalink)
initial_j has issues.. Join Date: Sep 2006 Location: Canterbury yo! Posts: 4,399	ok mate, ive been offered an ORC 409 series race clutch thats only done 5k, might well get that, gonna see if anyones used one....

10-07-2008, 15:29	#29 (permalink)
Jord GRD Drift Club Join Date: Sep 2004 Location: Peterborough Posts: 7,766	Ogura Racing Clutch 409 is rated to 400ps or 400lb/ft and is a single plate. What flywheel are you using?

10-07-2008, 17:18	#30 (permalink)
initial_j has issues.. Join Date: Sep 2006 Location: Canterbury yo! Posts: 4,399	tbh, not actually sure as didnt get much of a spec list with the car when i got it, so wont know until i open it up at the wkend, probably standard though?

10-07-2008, 17:34	#31 (permalink)
Jord GRD Drift Club Join Date: Sep 2004 Location: Peterborough Posts: 7,766	You'll probably need the fly reskimmed if your changing the clutch I think.

10-07-2008, 17:36	#32 (permalink)
initial_j has issues.. Join Date: Sep 2006 Location: Canterbury yo! Posts: 4,399	was considering doing that, maybe have it lightened at the same time as theres a good machiners down the road, still interested in your twin plate, soon as you got a rough price and condition

10-07-2008, 19:15	#33 (permalink)
Jord GRD Drift Club Join Date: Sep 2004 Location: Peterborough Posts: 7,766	Will keep you posted