Is this the most beautiful drift car ever?

Datsun 260Z widebody with S13 suspension - Aardvark

After long weeks of sleep deprivation to finish it in time, Aardvark was finally ready to be shown to the public at last weekend’s classics show. The shape is inspired by the Datsun 240Z-260Z IMSA-GTU race cars of old.

Datsun 260Z widebody with S13 suspension - Aardvark

The body is all custom fiberglass, made by OMG Visuals in Hungary. Every single panel, the doors, the roof, everything. You name it, we moulded, hand-laid, sanded and painted it. The rear windshield and the side windows are Lexan, with a very subtle tint to emphasize the shape.

Datsun 260Z widebody with S13 suspension - Aardvark

Look Ma’, no B-pillars! As the body is strengthened and there is a full roll-cage inside, we decided to do away with the stock B-pillar, to really bring out the gorgeous svelteness of the silhouette.

Datsun 260Z S30 widebody with S13 suspesion - Aardvark

The front bumper is attached by duct tape – if it’s strong enough to hold together LMP-1 race cars at Le Mans, it must be OK as a temporary fixture until we build a proper mount.

Datsun 260Z S30 widebody with S13 suspesion - Aardvark

The quarter panels / wings were hand formed to exactly match the width of the S13 rear suspension underneath with the Rota RBX wheels. Total width is 186 cm or 73.2“, up 24 cm or 10“ from stock.

Datsun 260Z S30 widebody with S13 suspesion - Aardvark

If you are a termite, say goodbye to your beloved queen, for Aardvark is after your ass.

Datsun 260Z S30 widebody with S13 suspesion - Aardvark

You can just about see the factory B-pillars on the orange original car in the foreground. We cut them off, and welded the window surround.

Datsun 260Z S30 widebody with S13 suspesion - Aardvark

The side view wants to evoke the Japanese flag. The purity of the lines is preserved by the lack of fancy colours and decals. The black vents are there to cool the engine bay and the brakes, inspired by the magnificent Alfa Stradale of the sixties.

I can barely wait to weigh the car, I’m very curious how much weight have we shed.

Datsun 260Z S30 widebody with S13 suspesion - Aardvark

Proper ladies for a proper old school GT. Knowing how petite Japanese girls are, you can guess how slammed Aardvark really is. In fact it’s 1175mm or 46“ tall, a full 4“ drop, done properly with redesigned geometry and Driftworks arms and coilovers all around.

The crowd reaction was just unbelievable. There is no JDM crazyness in Hungary, basically nobody knows what an S30 is. Most people have never heard of the Datsun 260Z at all. Yet people just loved Aardvark to bits. I actually had to sign a scale model kit for a boy who decided to build an exact replica. What an honour! Send us a big fat Like if you like what you see, the girl and the boys who built and painted it in three short weeks deserve all the recognition.

Previous build posts:  I. IntroductionII. Rear suspension and wheelsIII. front suspensionIV. redesigned suspension and steering

Subscribe
Notify of
guest

24 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
dan joyce
dan joyce
12 years ago

might have to paint my Datsun like that – Jay where are you?

nc26
nc26
12 years ago

wait hold on… no b pillars… that means when you open the door then you’ll have excess “window” coming out along with the door right?

ray
ray
Reply to  nc26
12 years ago

i doubt that …. because the window wont go down then… i mean i see no reason why they would build it with permanent windows… even racers need some fresh air.. i think the window is 2 piece the back half of the window stay put when you open the door just like a regular car but this just doesnt have the b pillar
.

kubel
kubel
12 years ago

that’s what the roof scoop is for, except this car does not have one. weird

alan
alan
12 years ago

answer to question, me thinks no sorry!

me
me
12 years ago

Definitely not the most beautiful, but it’s not ugly.

rising son
rising son
12 years ago

stunning!!! but the nicest ever? id say not

Emrys blomont
Emrys blomont
Reply to  Nino Karotta
12 years ago

Hi Nino,

Is there a number I could reach you at?
I would like to contact you regarding this car.

Thanx hope to talk to you soon.

Emrys

abed
abed
12 years ago

my m3 is the best

Adam
Adam
12 years ago

Paint job looks awesome! But IMO the wheels and stance is killing it. The wheels are rota 🙁 and hugee, makes the car look a bit pimp my ride style. Plus it sits too high from the floor, needs a lower more aggressive stance to pull off the styling on the car. Also this is a drift car? Surely when you take the rear end out on a wall your be gutted?

Douglas Burns
Douglas Burns
12 years ago

It certainly has potential and the paint job is stunning. So much work has gone into it but theres something not quite right… people mentioned the stance before, and i agree the wheels are just not for the car, and the front looks a bit too high. Whatever it is its only minor and the car still looks amazing. But i’d be gutted if you were to clip a wall or something!

omm
omm
12 years ago

Can’t wait to sit next to you for a proper run 🙂

me
me
12 years ago

I think it sits fine and is low enough, just the front body work looks Like it would be hard to make lower, without making the front of the car look too tall, if you know what I mean. It’ll be interesting to see what you do with that.

mark
mark
12 years ago

Awesome ride, looking forward to seeing a video of it smoking

Petukka
Petukka
12 years ago

devil Z 🙂

Tony
Tony
12 years ago

Awesome! Very nice build, and incredible you guys got it in this state in such a short time period…

Jay
Jay
12 years ago

Personally, I love it! I’m pretty sure its the best looking drift car I’ve ever seen anyway.

Tekno Twinky
Tekno Twinky
12 years ago

no it is not imo. i dont like it

geoffersmaher
geoffersmaher
12 years ago

nice stuff indeed

nickace
nickace
12 years ago

This is gorgeous, I’d love to have one, although I would put my own touch on things. Sweet ride can’t wait to see it running!

Mat
Mat
9 years ago

Are the body panels available for purchase? ! If so can you send me the link?
Please and thank you

Rynn Sparks
Rynn Sparks
9 years ago

Raise the rear SLIGHTLY, take out some negative camber on the rear and get your splitter on. I don’t follow drift cars, but this beauty has to be one of the best looking machines period.

From the Driftworks Shop

Get the latest product releases & offers...
24
0
Would love your thoughts, please comment.x
()
x