WORK Wheels T7R on Phil's E90

We love an aggressively fitted set of one-piece wheels here at Driftworks, especially when the wheels feature concave spokes. Yesterday morning we whipped the Meister S1 3-piece wheels off Phil’s BMW E90 M3 and replaced them with these awesome WORK Emotion T7Rs.

Measuring 19×9.5 ET12 up front and 19×10.5 ET12 at the rear (with the help of a 20mm front spacer and a 9mm rear spacer), the end result is a very aggressive and purposeful looking stance. This set of T7Rs was custom made by WORK Wheels in Japan with a suitable 5×120 PCD, along with the correct 72.5mm centre bore.

The inner-arch areas on Phil’s E90 have been modified to allow for greater clearance which means that aggressive wheels like these could be fitted, although wheels with these specs will fit an E90 M3 that hasn’t been modified to the same extent so long as spacers are not used with them.

The GT Silver paint finish looks great against the black of the BMW, while the Red Centre Caps and Red Open-Ended Wheel Nuts top the wheels off perfectly.

If you like the look in these photos, this exact set of WORK wheels is actually available to buy here. If you want to order a set of T7Rs with your own choice of finish and offset, you can take a look at what we’ve got in stock or have a set custom made in Japan to suit your exact requirements.