Nissan 200SX S14 Wheel Guide

Nissan 200SX S14 (1993-2000)

Nissan 200SX S14 Wheel Guide

Wheel Fitment Guide for Nissan 200sx S14

Factory Wheel Specs:

  • PCD: 5x114
  • Diameter: 16"
  • Width: 6.5"
  • Offset: ET40

When you’re looking for aftermarket alloy wheels, you can increase the diameter and width from the original factory supplied set if you like and there will usually be a variety of offsets that will fit, but you must get a wheel that matches the original PCD of 5x114.

We would recommend either 17” or 18” diameter, as this will look great, allow for big brake clearance and let you fit the most suitable tyre sizes for increases in power.

How big and wide you go for depends on the look you’re after, what tyres you want to fit and whether you just want a simple straightforward bolt-on fit, or you’re prepared to put some work into adapting the suspension and bodywork to suit.

We can supply wheels in a big variety of sizes, from exact replacements for your originals, up to huge, wide and deep dish drift style wheels. Here’s some examples of different sizes and styles of Rota wheels fitted to 200SX S14 to give you an idea of the look and range of what’s available.

You can find direct links to the Rota wheels to fit the Nissan 200SX at the bottom of this page. If you’re still not sure of what you need, just give us a call or drop us a message and we’ll be happy to help.

Recommended Wheel Sizes

Nissan 200sx S14 bolt on wheel fitment

Bolt-on Fitment

Any of the 8J or 8.5J width wheels in ET20 to 35 will go straight on your S14 front or rear without requiring any arch work. ET20 is the optimum offset for a “flush” fitment, whilst higher offsets give a more traditional fitment. 9.5J ET35/38 can also be used on the rear with a 235 or smaller tyre, and some negative camber.

Recommended Bolt-on Fitment Sizes:
17x8/18x8.5 ET20-35 x4
8.5/9.5J staggered fit

Our favourite Bolt-On wheels for the Nissan 200sx S14

Nissan 200sx S14 modified wheel fitment

Modified Fitment (Arches Will Need Rolling)

9 & 9.5J will give you the “drift” wheels with concave spokes, you’ll require a lip roll to fit them. The smaller section tyre and more negative camber you run, the easier they’ll fit. Inboard front suspension clearance is the only other issue, but a 9J ET25-30 or a 9.5J ET20 will clear most suspension.

Recommended Modified Fitment Sizes:
17/18x 9.5 ET12-30

Nissan 200sx S14 extreme wheel fitment

Extreme Fitment (Arch & Suspension Changes)

Lower offsets with 9.5J and wider are a popular fit with an arch pull front and rear. The wider the wheel and tyre, the more you’ll need to pull the arch. 10J is the biggest possible on the front with a wing pull and allows you to run a nice big tyre. Any wider on the rear will require either a large flare and negative camber, or overfenders. We can also help with wheel fitment for custom arches/bodykits and supply any wheel spacers needed.

Recommended Modified Fitment Sizes:
18x10 ET12
18x11 ET8
18x12 ET20

Driftworks have a huge array of wheels available in-store including designs from the likes of WORK Wheels, JR, Rota and Cosmis.

Wheel PCD / Stud Pattern
Product Type
Wheel Size
Wheel Width
Wheel Model
Wheel Structure

Set Ascending Direction

1-24 of 1862

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Loading Products
Get the latest product releases & offers...