PFF1-802 - Road Series - Pack of 2
PFF1-802 - Road Series - Pack of 2
1-2 working days
Description
Powerflex PFF1-802 Road Series Polyurethane bushes
Powerflex offer a wide range of polybushes to fit almost every make and model of car, polybushing is an easy way of dramatically improving suspension response without sacrificing too much in the way of refinement!
We keep a wide range of Powerflex products in stock ready for same working day dispatch, none-stock items generally take 5-6 working days.
See fitment in Description below.
These bushes fit the following Vehicle/s
Alfa Romeo 145, 146, 155 (1992-2000)
Front Lower Wishbone Rear Bush
Bushes Required:2
Packs Required:1
Notes:These bushes are designed to fit genuine control arms. If non genuine arms are fitted and you find the stainless steel sleeve not to fit onto the wishbone, please contact us with dimensions of the wishbone pin as you will require modified sleeves. PFF1-802 kit comes with different sized rings. Please select the correct ring depending on the rear bracket fitted. Use the smaller ring (802b) with the aluminium bracket and 802c with the pressed steel bracket. It is only possible to fit these bushes after removing the arms from the car. For arms fitted with the pressed steel rear bracket, the rubber bush may need to be burned out using a blowtorch, firstly and then the bracket cleaned thoroughly to ensure a good surface. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM
See Diagram ref 2 Here and click Here for the product catalogue
Alfa Romeo GTV & Spider 2.0 & V6, 916 (1995-2005)
Front Lower Wishbone Rear Bush
Bushes Required:2
Packs Required:1
Notes:These bushes are designed to fit genuine control arms. If non genuine arms are fitted and you find the stainless steel sleeve not to fit onto the wishbone, please contact us with dimensions of the wishbone pin as you will require modified sleeves. PFF1-802 kit comes with different sized rings. Please select the correct ring depending on the rear bracket fitted. Use the smaller ring (802b) with the aluminium bracket and 802c with the pressed steel bracket. It is only possible to fit these bushes after removing the arms from the car. For arms fitted with the pressed steel rear bracket, the rubber bush may need to be burned out using a blowtorch, firstly and then the bracket cleaned thoroughly to ensure a good surface. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM
See Diagram ref 2 Here and click Here for the product catalogue
Fiat Coupe (1993-2000), Brava, Bravo, Marea (1995-2001)
Front Lower Wishbone Rear Bush
Bushes Required:2
Packs Required:1
Notes:These bushes are designed to fit genuine control arms. If non genuine arms are fitted and you find the stainless steel sleeve not to fit onto the wishbone, please contact us with dimensions of the wishbone pin as you will require modified sleeves. PFF1-802 kit comes with different sized rings. Please select the correct ring depending on the rear bracket fitted. Use the smaller ring (802b) with the aluminium bracket and 802c with the pressed steel bracket. It is only possible to fit these bushes after removing the arms from the car. For arms fitted with the pressed steel rear bracket, the rubber bush may need to be burned out using a blowtorch, firstly and then the bracket cleaned thoroughly to ensure a good surface. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM
See Diagram ref 2 Here and click Here for the product catalogue
Fiat Tipo (1988-1995)
Front Lower Wishbone Rear Bush
Bushes Required:2
Packs Required:1
Notes:These bushes are designed to fit genuine control arms. If non genuine arms are fitted and you find the stainless steel sleeve not to fit onto the wishbone, please contact us with dimensions of the wishbone pin as you will require modified sleeves. PFF1-802 kit comes with different sized rings. Please select the correct ring depending on the rear bracket fitted. Use the smaller ring (802b) with the aluminium bracket and 802c with the pressed steel bracket. It is only possible to fit these bushes after removing the arms from the car. For arms fitted with the pressed steel rear bracket, the rubber bush may need to be burned out using a blowtorch, firstly and then the bracket cleaned thoroughly to ensure a good surface. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM
See Diagram ref 2 Here and click Here for the product catalogue
Lancia Delta Gen 1&2 (1983-2000), Dedra (1989-2000)
Front Lower Wishbone Rear Bush
Bushes Required:2
Packs Required:1
Notes:These bushes are designed to fit genuine control arms. If non genuine arms are fitted and you find the stainless steel sleeve not to fit onto the wishbone, please contact us with dimensions of the wishbone pin as you will require modified sleeves. PFF1-802 kit comes with different sized rings. Please select the correct ring depending on the rear bracket fitted. Use the smaller ring (802b) with the aluminium bracket and 802c with the pressed steel bracket. It is only possible to fit these bushes after removing the arms from the car. For arms fitted with the pressed steel rear bracket, the rubber bush may need to be burned out using a blowtorch, firstly and then the bracket cleaned thoroughly to ensure a good surface. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM
See Diagram ref 2 Here and click Here for the product catalogue