This Wisefab Track and Race Suspension kit can be installed on Mitsubishi EVOLUTION 7, 8, 9 as well as to predecessor EVO 6 with some extra work.

• -15 kg of combined weight saving over original components
  But still maintaining required strength and stiffness
• 7075-T6 aluminium billet CNC knuckles and arms 
  With an optimized double shear design that provides low weight and high strength
  Steering ratio is slightly quicker compared to OEM
• Separate camber, caster adjustments
  The kit comes with camber adjustable top mounts that have separate camber and caster adjustment. Initially the caster is set to 4,7 degrees
• The standard 17“ or bigger wheel can be used
  If standard wheels are used, then there are no modifications needed to the chassis. If the wheels are wider or lower offset, then wider front fenders will be needed
• Mounting points for both EVO 7, 8, 9, or 10 brake calipers
• EVO CV joints are known to be very good to handle big power
  If power and grip exceeds their limits, then the uprights have room for bigger CV joints if needed.

Kit includes:

• Adjustable camber and caster top mounts
• Knuckles with hardware
• Lower control arms
• Assembled tie rods
• Installation guide

Other information:

• This kit assumes coilovers
• Minimum wheel size is 17“
• Original wheel speed sensor can be used

* Installation to EVO 6 chassis requires minor subframe modification