Standard Nissan subframe bushes are super soft and allow the subframe to move around under the car when put under load.
The Driftworks poly subframe bushes literally transform the feeling of the car, without sacrificing refinement for a comfortable road car.
A vital upgrade, as these bushes are responsible for holding the entire rear end of the car in place!
NOTE: These bushes do not fit Skyline GTR Subframes
You will need to remove the OEM metal collars from your subframe when fitting aftermarket bushes
Drifting puts a lot of stress on subframe bushes, especially on an older car and especially when an uprated or welded diff is fitted
These poly subframe bushes for Nissan 200sx S13/S14/s15, Skyline Gtst R32/R33/R34 and 300ZX Z32 fit in place of the standard bushes and tighten the rear end up a treat. They come with 3mm thick laser cut steel washers which ensure the bushes can't go anywhere once they're fitted.
These are significantly uprated compared to standard bushes whilst still leaving a little bit of compliance so it's not too harsh.
Please note these raise the subframe slightly, which whilst good for suspension geometry, may require a washer to space the retaining nut properly.
