Uprated poly bushes for the rear lower arms on your S13/Skyline R32.
This bush does not fit the S14 lower arms
The Driftworks rear lower arm poly bushes eliminate the common axle tramp problems associated with standard rear lower arm bushes.
An ESSENTIAL upgrade as they take a lot of load under power/braking!!
These are priced individually, please select 4 to replace all bushes per car.
Green Dots - Rear lower arm bush.
4 required when using standard lower arms.
Orange Dots - Upright and control arm bush. THIS LISTING IS NOT FOR THIS BUSH
10 required with all standard control arms. Can be purchased here on our store!
6 required when used with a Driftworks Four Arm kit.
HICAS equiped cars require 2 less ‘upright and control arm’ bushes.
To fit the bushes first burn out the old rubber bush:
Then, remove the steel collar from inside the housing, this it most easily done by slotting with a saw, then bashing out:
Lubricate the Driftworks poly bush, it will then slide into place! You may need to use a clamp/vice depending on how strong you are!