Driftworks rear upright and control arm bush Nissan S13 S14 S15 R32 R33

Driftworks rear upright and control arm bush Nissan S13 S14 S15 R32 R33

Ships same day

Mastercard Icon AMEX Icon Visa Icon Applepay Icon Paypal Icon

Description

Driftworks S body rear upright and control arm bushes for the Nissan Silvia and 200SX (UK & European market Sbody) S13, S14, S15 models and Nissan Skyline R32 and R33 models.

The worn, old standard bushes are very soft, replacing them is a 'must-do' job.

Replace them with these bushe for more precise and predictable handling.

These are priced individually, please see below diagram for quantities required.

Driftworks Nissan S13 S14 S15 R32 R33 Upright and Control Arm bushes.
The orange dots on the image show the position of these bushes.
10 required with all standard control arms.
6 required when used with a Driftworks Four Arm kit.
HICAS equiped cars require 2 less ‘upright and control arm’  bushes.

To fit the bushes press or burn out the rubber part of the original bush, then remove the steel collar from inside the housing. This it most easily done by slotting with a saw, then bashing out:

Lubricate the Driftworks poly bush if needed, and push each half in from either side. Then push the steel insert into place.

*Pictures are of a rear lower arm, but the bush removal is exactly the same.

Estimate shipping for this item

loader
Loading...

Finance Calculator

Reviews

Product Questions