Driftworks Total HICAS Eliminator Kit with Poly Bushes for Nissan Skyline R32 88-94

Driftworks Total HICAS Eliminator Kit with Poly Bushes for Nissan Skyline R32 88-94

Part No: SB03-04

Ships same day

Mastercard Icon AMEX Icon Visa Icon Applepay Icon Paypal Icon

Description

The Driftworks Total HICAS Eliminator. Now with a new super tough black coating on the rods and Black ECote on all the fittings for a robust finish.

Everything you need to fit these arms to your car is provided for an easy bolt on replacement.We all know how fragile the HICAS rear steering system is on RWD Nissans. If it's not the incredibly weak outer ball joint that breaks, it's the tie rods. Either way you end up with play, causing unpredictable handling and MOT failure.This comprehensive Driftworks HICAS Eliminator kit removes every part of the flawed Nissan system, replacing it with fully adjustable, heavy duty rod ends toe control arms giving precise adjustment and confidence inspiring handling.The kit removes the HICAS steering rack, the tie rods, the tie rod ends and the outer hub end ball joints, replacing them with:Two very high quality British built brackets, that bolt into existing holes in the rear subframe. (no drilling required)The tie rods and ends are replaced with a heavy duty toe control arm, this gives full adjustability. These are not service items as some other manufacturers use, they are fit and forget self lubricating rose joints specced for the European roads.The outer ball joint is replaced with an uprated Driftworks Polyurethane bush completing the removal of every part of the HICAS system.This kit will fit all HICAS equipped Nissan cars, both hydraulic and electric (Including R32GTS-t, R32 GTR, R33 GTS-t, R33 GTR, R34 GTT, R34 GTR, S14 Silvia, S15 Silvia, S13 180sx, S13 Silvia, A31 Cefiro, A33 Laurel, Z32 300ZX).

NOTE: Please be aware that while this kit is a great fit for most, a small percentage of cars have different tolerances on the rear hub bush holes and will require a different, slightly larger, bush. Our regular bushes are 30mm diameter. We can supply an oversized bush at an additional cost if needed. The replacement oversized Superpro bush can be found here on our store.

Driftworks alignment arms are sold with a two year warranty against rod end and bearing failure along with a lifetime warranty against structural arm failure.
Do not confuse these with cheap, generic arms - they're the same ones used on championship winning drift and track cars around the world.

If you need any technical help with these arms please contact our tech guys and they will be happy to help!


Driftworks Arm Warranty

Estimate shipping for this item

loader
Loading...

Finance Calculator

Reviews

Product Questions