Driftworks rear upright and control arm bush

Driftworks rear upright and control arm bush

£9.00
Availability:
In Stock
Finance options
Finance options
Worldwide Shipping Get a quote

Note: Due to some overlapping stock deliveries these bushes may be either black or orange. If you would like a specific colour, please leave a note in the order comments.


The Driftworks rear upright poly bushes remove the slop associated with standard rubber bushes.


To fit all 200sx, Skyline and 300ZX.


The worn, old standard bushes are very soft, replacing them is a 'must-do' job.


Replace them with these polybushes for firm, consistant and predictable handling.


These are priced individually, please see below diagram for quantities required.

Description

Details

Green Dots - Rear lower arm bush. THIS LISTING IS NOT FOR THIS BUSH, 
4 required when using standard lower arms. Can be purchased here on our store!

Orange Dots - Upright and control arm bush.
10 required with all standard control arms.
6 required when used with a Driftworks Four Arm kit.
HICAS equiped cars require 2 less ‘upright and control arm’  bushes.

To fit the bushes first burn out the old rubber bush:

Then, remove the steel collar from inside the housing, this it most easily done by slotting with a saw, then bashing out:

Lubricate the Driftworks poly bush, and push it in. You need to pull the lips outside of the hub/arm to seat the bush properly - be careful not to tear it! Then push the steel insert into place. You may need to use a clamp/vice depending on how strong you are!

*Pictures are of a rear lower arm, but the bush removal is exactly the same.

Shipping Price

Shipping Price

We ship worldwide!
  • Yes No
Finance

Finance Calculator

Reviews

5.00 Average

1 Reviews

Morgan Ireland

Get the latest product releases & offers...
Top