It pains me to do this but unfortunately after the 1JZ engine starting to rattle yesterday I have decided to break my 1JZ S15. I have spent two years slowly building the car and unfortunately now have lost heart and want to go back to owning a 180sx which I care less about and don’t mind pranging off walls. Please note, the car is still whole and driving and will not be stripped until 2 weeks’ time (due to work commitments). Once the car has been stripped the items that have not had a deposit placed on them will be photographed. All prices are collected from Northern Ireland, however I can arrange postage at buyer’s expense, all items will be wrapped correctly or large items can be put on a pallet for collection. Deposit/full payment can be taken on all items and upon removing them from the car they will be posted out. Please note I offer NO refund on the deposits placed, I do not want my time wasted. Please no silly offers. All payments/deposits by Paypal with fees covered or as gift. The car is currently sitting as pictured. S15 Shell – Headlights, tail lights, full interior bar seats/steering wheel, bonnet, doors, all glass, mint underneath, has a modified slam panel for the 1JZ swap but can include the original section to be put back in, Car was previously in the South of Ireland so has had VRT paid, in the UK its MOT’d until January 2016 – Decent offers please. R154 Gearbox – Good condition with smooth changes, always ran with fresh oil. Bare box. £900 Exedy Single Stage, Clutch, Flywheel and pressure plate - £250 Will do the gearbox, bellhousing, clutch and shifter as a package for - £1370 1JZ > Sbody prop shaft, welded and balanced by Richard Bradley - £100 2JZ/1JZ Alternator, was bought as a reconditioned unit only 4 months ago - £80 1JZ GTE Soarer Auto ECU – £80 1JZ > Sbody conversion mounts, Engine & Gearbox - £100 Full JZ Sbody HKS Hi Power exhaust system, including silencer, Tig welded together to fit, has some scrape marks in the mid-section where the car was running low - £200 1JZ Front sump, some light marks from running low, needs a new bung bolt - £250 S14/S15 adjustable rear arm set - £100 S14/S15 Subframe with solid driftworks bushes - £80 Skyline R33 braided brake lines front and rear - £40 S15 Spec R Aero skirts, genuine plastic, good condition - £300 S15 Spec R rear bumper with Aero spats, genuine plastic, good condition - £300 HKS Turbo timer - £25 Volk GTC 18x10 ET–2 18x9 ET0, some marks on the lips but overall in good condition, no bends or buckles, come with two brand new tyres on front and worn ones on the rear. These are very aggressive and rare - £1350 Bride Vios Low Max, Kevlar backed, pair, both in very good condition, comes with universal rails - £550 Bride super low driver side rail, side mount – £130 Kaaz 2way diff - Comes bare, needs casing and shafts. - £250 Skyline R33 brake set up, with handbrake. Drilled and grooved discs, meaty pads. - £400 (Relisted due to no show) Daiyama coilovers, all good condition and were almost new when I put them in - £300 (Relisted due to no show) Please private message me if you are interested in parts. Thanks Dylan. Sold/Deposit items below: AEM Air/Fuel ration kit, everything included, 5 months old - DEPOSIT TAKEN. Blitz old school boost controller, hi/low boost with scramble boost, everything present including all wiring - SOLD Origin front over fenders, genuine origin purchased from Japan - SOLD Origin rear over fenders, genuine origin purchased from Japan - SOLD Origin rear roof spoiler, genuine origin purchased from Japan - SOLD Defi style oil temp gauge - DEPOSIT TAKEN Defi style oil pressure gauge - DEPOSIT TAKEN Defi style water temp gauge - DEPOSIT TAKEN Defi style RPM gauge - DEPOSIT TAKEN S15 Spec R Aero front bumper, genuine plastic, has had repair work from being damaged before, front lower lip still has some minor marks and a small graze on passenger side from touching kerb - SOLD Holset HY35 Turbo, 2.5” outlet, internal wastegate has been TIG welded shut, comes with lines to fit 1JZ, the correct restrictor and fittings. Has been ran on my car for less than 4000 miles - DEPOSIT TAKEN. 1JZ Toyosport Single turbo manifold, has had the wastegate position modified to clear an Sbody steering rack, also has a strength bar added. Can include new gasket - DEPOSIT TAKEN. 50mm Wastegate – fits the above manifold via Vband. - DEPOSIT TAKEN. R154 extended shifter (custom made) all high quality TIG welded - SOLD. 50mm Rad modified to fit a JZ Sbody, all TIG welded - SOLD. Turbo 2.5” > 3” 1JZ Exhaust downpipe, with flanges for AFM and Lambda, clears steering knuckle - DEPOSIT TAKEN. R154 > 1JZ Bellhousing - Prov Sold. Front Mount Intercooler - SOLD
Shoot me a price over for rolling shell dude , all the body work bumpers etc i have my own coilovers , wheels and don't need brakes though cheers
Well unfortunately that is the going rate for most things now? And that is what I have paid for most of them. Would you rather I sold everything cheap so you can get a good deal? :/
very interested in seats,bonnet,front bumper and gauges if you can send me on your number to stuartwalshes15@gmail.com
I don't have the money to replace the bottom end with my current situation, plus I want another 180sx and could do with freeing up some money from the S15. Not really madness.